SE  >> Vol. 1 No. 1 (October 2011)

    核燃料束和燃料护套之等效热传性质在Fluent仿真计算之研究
    The Effective Thermal Properties Calculation in the Fluent Simulation Program for the Fuel Bundles and Cladding of the Spent Fuel Dry Storage System

  • 全文下载: PDF(1163KB) HTML   XML   PP.25-30   DOI: 10.12677/se.2011.11005  
  • 下载量: 2,229  浏览量: 7,831   科研立项经费支持

作者:  

林唯耕,王仲容,曾永信,张睿恩,施纯宽

关键词:
干式贮存用过核子燃料计算流体力学窗口化操作接口
Dry Storage System; Spent Fuel; CFD; Windows Operation Interface

摘要:

由于本身的特性及社会大众的感观,核电厂的安全必需不断的精进,并视各种不正常的运作状况做出改进。福岛核灾之后,未来核电厂除了会针对复合性灾难做出评估外,用过燃料的贮存也是改进的重点。放置于乏燃料池中的乏燃料在电厂全黑时无法移热,而干式贮存系统则能在室温下完全移除燃料的衰变热。为完成干式贮存系统的建置,吾人引进计算流体力学软件-FLUENT来对系统的热传导状况进行分析及认证。FLUENT计算能力卓越,但强大的功能也附带了繁琐的操作,本研究之目地在于将FLUENT其中一部份计算过程以Visual Basic(VB)另外独立写成一窗口化操作接口软件,将干贮系统热流分析中常需计算之组件预先模块化,以期进行热流分析时,得以加速整体工作之进展。

The safety of Nuclear Power Plant needs to keep developing because of its feature. People don’t want to see any accident even that is just a simple error. So, the SOP of Nuclear Power Plant is revised every time when there’s in normal situation of operation. After the Fukushima Disaster, Complex Disasters and Spent Fuel Storage are the two points that Nuclear Engineering should notice. Power plants put spent fuel into spent fuel pool before we have a better way to deal with spent fuel. In Station Black Out situation, spent fuel pool can’t remove decay heat. That’s why 4th and 5th units of Fukushima 1st Plant damaged in disaster. Spent Fuel Dry Storage System can avoid this kind of accident because it can remove decay heat completely by natural circulation. To build the system, we need to analyze the heat transfer condition, so INER introduced CFD-FLUENT to do the simulation. FLUENT is a CFD program with accurate calculation ability, but it always takes long time to get the calculating results and also some other disadvantages. To save time of simulations, we want to conduct a new program which has modularized some computation processes. It can also improve quality of simulation.

文章引用:
林唯耕, 王仲容, 曾永信, 张睿恩, 施纯宽. 核燃料束和燃料护套之等效热传性质在Fluent 仿真计算之研究[J]. 可持续能源, 2011, 1(1): 25-30. http://dx.doi.org/10.12677/se.2011.11005

参考文献

[1] US Nuclear Regulatory Commission. Packaging and transport- tation of radioactive material. 10 CFR Part 71, 1996-4.
[2] US Nuclear Regulatory Commission. Standard review plan for dry cask storage systems. NUREG-1536, 1997-1.
[3] US Nuclear Regulatory Commission. Cladding considerations trans- portation and storage of spent fuel. ISG-11, Rev. 3.
[4] NAC Inc. NAC-UMS Universal MPC system final safety analysis report. NAC International, R-208624, Rev. 8A, 2009-2.
[5] 台湾电力公司. 核一厂用过核子燃料干式贮存设施安全分析报告[R]. 热流分析, 第6章第3节, 2007.
[6] ANSYS Inc. Ansys Flunet V12. 01 User’s Manuals, 2009-2.
[7] 杨宗佑. 核一厂干式贮存设施密封钢筒稳态热传分析计算书[Z]. ISFSI-04-CAL-04-06002-03.
[8] Y.-S. Tseng, J.-R. Wang, Y.-H. Cheng and C.-K. Shih. The cooling design investigation for a high capability dry-storage system through CFD simulation. ANS 2008 Winter Conference, Fuel Cycle and Waste Management: General—III: 213-215.
[9] Y.-S. Tseng, J.-R. Wang, Y.-H. Cheng and C.-K. Shih. Validation study of fluent for the application of dry-storage system thermal analysis. ICAPP 09 Tokyo, 10-14 May 2009, Paper 9051.