[1]
|
Innaurato, N., Oggeri, C., Oreste, P.P. and Vinai, R. (2007) Experimental and Numerical Studies on Rock Breaking with TBM Tools under High Stress Confinement. Rock Mechanics and Rock Engineering, 40, 429-451.
https://doi.org/10.1007/s00603-006-0109-4
|
[2]
|
Zhu, W.C., Liu, J. and Tang, C.A. (2005) Simulation of Progres-sive Fracturing Processes around Underground Excavations under Biaxial Compression. Tunnelling and Underground Space Technology, 20, 231-247.
https://doi.org/10.1016/j.tust.2004.08.008
|
[3]
|
Molladavoodi, H. and Mortazavi, A. (2011) A Damage-Based Numerical Analysis of Brittle Rocks Failure Mechanism. Finite Elements in Analysis and Design, 47, 991-1003. https://doi.org/10.1016/j.finel.2011.03.015
|
[4]
|
Gong, Q.M., Zhao, J. and Jiao, Y.Y. (2005) Numerical Modeling of the Effects of Joint Orientation on Rock Fragmentation by TBM Cutters. Tunnelling and Underground Space Tech-nology, 20, 183-191.
https://doi.org/10.1016/j.tust.2004.08.006
|
[5]
|
Gong, Q.M., Jiao, Y.Y. and Zhao, J. (2006) Numerical Modeling of the Effects of Joint Spacing on Rock Fragmentation by TBM Cutters. Tunnelling and Underground Space Technology, 21, 46-55.
https://doi.org/10.1016/j.tust.2005.06.004
|
[6]
|
于庆磊, 杨天鸿, 唐春安. 基于真实细观结构的准脆性材料三维建模及应用初探[J]. 计算力学学报, 2010, 27(5): 887-896.
|
[7]
|
Harthong, B., Scholtès, L. and Donzé, F.-V. (2012) Strength Characterization of Rock Masses, Using a Coupled DEM-DFN Model. Geophysical Journal International, 191, 467-480. https://doi.org/10.1111/j.1365-246X.2012.05642.x
|
[8]
|
Zhou, W.Y. and Yan, G.R. (1997) Fractal Analysis of Fracture Damage Propagation of Rock. Tsinghua Science and Technology, 2, 666-669.
|
[9]
|
Bažant, Z.P. (2003) Microplane Constitutive Model for Porous Isotropic Rocks. International Journal for Numerical and Analytical Methods in Geomechanics, 27, 25-47. https://doi.org/10.1002/nag.261
|
[10]
|
Borodich, F.M. (1997) Some Fractal Models of Fracture. Journal of the Mechanics and Physics of Solids, 45, 239-259.
https://doi.org/10.1016/S0022-5096(96)00080-4
|
[11]
|
Zhao, Y.H. (1998) Crack Pattern Evolution and a Fractal Damage Constitutive Model for Rock. International Journal of Rock Mechanics and Mining Sciences, 35, 349-366. https://doi.org/10.1016/S0148-9062(97)00340-9
|
[12]
|
Jiang, Y.J., Tanabashi, Y. and Li, B. (2006) Influence of Geometrical Distribution of Rock Joints on Deformational Behavior of Underground Opening. Tunneling and Under-ground Space Technology, 21, 485-491.
https://doi.org/10.1016/j.tust.2005.10.004
|
[13]
|
Li, C.L., Prikry, R. and Nordlund, E. (1998) The Stress-Strain Behavior of Rock Material Related to Fracture under Compression. Engineering Geology, 49, 293-302. https://doi.org/10.1016/S0013-7952(97)00061-6
|
[14]
|
Tan, C.P., Zweiri, Y.H. and Althoefer, K. (2005) Online Soil Parameter Estimation Scheme Based on Newton-Raphson Method for Autonomous Excavation. IEEE/ASME Transactions on Mechatronics, 10, 221-229.
https://doi.org/10.1109/TMECH.2005.844706
|
[15]
|
Tafazoli, S., Lawrence, P.D. and Salcudean, S.E. (1999) Iden-tification of Inertial and Friction Parameters for Excavator Arms. IEEE Transactions on Robotics and Automation, 15, 966-971. https://doi.org/10.1109/70.795801
|
[16]
|
Zweiri, Y.H., Seneviratne, L.D. and Althoefer, K. (2004) Pa-rameter Estimation for Excavator Arm Using Generalized Newton Method. IEEE Transactions on Robotics, 20, 762-767. https://doi.org/10.1109/TRO.2004.829476
|
[17]
|
Zhao, Z.Y., Chow, T.L. and Rees, H.W. (2009) Predict Soil Texture Distributions Using an Artificial Neural Network Model. Computers and Electronics in Agriculture, 65, 36-48. https://doi.org/10.1016/j.compag.2008.07.008
|
[18]
|
Zhou, X.W., Xia, Y.M. and Xue, J. (2009) Neural Network Strata Identification Based on Tunneling Parameters of Shield Machine. International Conference on Intelligent Robotics and Applications, Singapore, 16-18 December 2009, Lecture Notes in Computer Science Vol. 5928, 392-401. https://doi.org/10.1007/978-3-642-10817-4_39
|
[19]
|
Provenzano, P. (2003) A Fuzzy-Neural Network Method for Modeling Uncertainties in Soil-Structure Interaction Problems. Computer-Aided Civil and Infrastructure Engineering, 18, 391-411.
https://doi.org/10.1111/1467-8667.00326
|
[20]
|
Bhattacharya, B. and Solomatine, D.P. (2006) Machine Learning in Soil Classification. Neural Networks, 19, 186-195.
https://doi.org/10.1016/j.neunet.2006.01.005
|
[21]
|
Kumar, J.K., Konno, M. and Yasuda, N. (2000) Subsurface Soil-Geology Interpolation Using Fuzzy Neural Network. Journal of Geotechnical and Geoenvironmental Engineering, 126, 632-639.
https://doi.org/10.1061/(ASCE)1090-0241(2000)126:7(632)
|
[22]
|
Smith, L.N., German, R.M. and Smith, M.L. (2002) A Neural Network Approach for Solution of the Inverse Problem for Selection of Powder Metallurgy Materials. Journal of Materials Processing Technology, 120, 419-425.
https://doi.org/10.1016/S0924-0136(01)01198-0
|
[23]
|
Vladimir, M.K. and Helmut, S. (2003) Some Neural Net-work Applications in Environmental Sciences, Part I: Forward and Inverse Problems in Geophysical Remote Meas-urements. Neural Networks, 16, 321-334.
https://doi.org/10.1016/S0893-6080(03)00027-3
|
[24]
|
Vera, K. (2005) Neural Network Learning as an Inverse Problem. Logic Journal of the IGPL, 13, 551-559.
https://doi.org/10.1093/jigpal/jzi041
|
[25]
|
Wang, Z., Ulanowski, Z. and Kaye, P.H. (1999) On Solving the Inverse Scattering Problem with RBF Neural Networks: Noise-Free Case. Neural Computing & Applications, 8, 177-186. https://doi.org/10.1007/s005210050019
|
[26]
|
Sever, A. (2013) A Neural Network Algorithm to Pattern Recognition in Inverse Problems. Applied Mathematics and Computation, 221, 484-490. https://doi.org/10.1016/j.amc.2013.06.094
|
[27]
|
Guan, X.L. and Melchers, R.E. (2011) Effect of Response Surface Parameter Variation on Structural Reliability Estimates. Structural Safety, 23, 429-444. https://doi.org/10.1016/S0167-4730(02)00013-9
|
[28]
|
Saha, R., Upadhyaya, S.K. and Wallender, W.W. (2010) Inverse Solution of Soil-Water Transport Model Parameters Using Response Surface Methodology. Transactions of the ASABE, 53, 1137-1145.
https://doi.org/10.13031/2013.32603
|
[29]
|
Abusam, A., Keesman, K.J., van Straten, G., Spanjers, H. and Meinema, K. (2001) Parameter Estimation Procedure for Complex Non-Linear Systems: Calibration of ASM No. 1 for N-Removal in a Full-Scale Oxidation Ditch. Water Science and Technology, 43, 357-365. https://doi.org/10.2166/wst.2001.0445
|
[30]
|
Muthuvelayudham, R. and Viruthagiri, T. (2010) Application of Cen-tral Composite Design Based Response Surface Methodology in Parameter Optimization and on Cellulase Production Using Agricultural Waste. International Journal of Chemical and Biological Engineering, 3, 97-104.
|
[31]
|
Kunamneni, A. and Kumar, K.S. (2005) Response Surface Methodological Approach to Optimize the Nutritional Parameters for Enhanced Production of -Amylase in Solid State Fermentation by Thermomyces lanuginosus. African Journal of Bio-technology, 4, 708-716. https://doi.org/10.5897/AJB2005.000-3138
|
[32]
|
Zheng, D.J., Cheng, L. and Bao, T.F. (2013) Integrated Parameter Inversion Analysis Method of a CFRD Based on Multi-Output Support Vector Machines and the Clonal Selection Algorithm. Computers and Geotechnics, 47, 68-77.
https://doi.org/10.1016/j.compgeo.2012.07.006
|
[33]
|
Belheine, N., Plassiard, J.P., Donzé, F.V., Darve, F. and Seridi, A. (2009) Numerical Simulation of Drained Triaxial Test Using 3D Discrete Element Modeling. Computers and Geotechnics, 36, 320-331.
https://doi.org/10.1016/j.compgeo.2008.02.003
|
[34]
|
Coetzee, C.J. and Els, D.N.J. (2009) Calibration of Discrete Element Parameters and the Modelling of Silo Discharge and Bucket Filling. Computers and Electronics in Agriculture, 65, 198-212.
https://doi.org/10.1016/j.compag.2008.10.002
|
[35]
|
Sazzad, M.M. and Islam, M.S. (2008) Macro and Me-so-Mechanical Responses of Granular Material under Varying Interparticle Friction. Journal of Civil Engineering, 36, 87-96.
|
[36]
|
Zhang, Q., Zhu, H., Zhang, L. and Ding, X. (2011) Study of Scale Effect on Intact Rock Strength Using Particle Flow Modeling. International Journal of Rock Mechanics and Mining Sciences, 48, 1320-1328.
https://doi.org/10.1016/j.ijrmms.2011.09.016
|
[37]
|
Lisjak, A. and Grasselli, G. (2014) A Review of Discrete Modeling Techniques for Fracturing Processes in Discontinuous Rock Masses. Journal of Rock Mechanics and Ge-otechnical Engineering, 6, 3014-314.
https://doi.org/10.1016/j.jrmge.2013.12.007
|
[38]
|
Heok, E. and Martin, C.D. (2014) Fracture Initiation and Prop-agation in Intact Rock: A Review. Journal of Rock Mechanics and Geotechnical Engineering, 6, 287-300. https://doi.org/10.1016/j.jrmge.2014.06.001
|
[39]
|
Potyondy, D.O. and Cundall, P.A. (2004) A Bonded-Particle Model for Rock. International Journal of Rock Mechanical & Mining Sciences, 41, 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011
|
[40]
|
Psakhie, S.G., Shilko, E.V., Grigoriev, A.S., Astafurov, S.V. and Dimaki, A.V. (2014) A Mathematical Model of Particle-Particle Interaction for Discrete Element Based Modeling of Deformation and Fracture of Heterogeneous Elastic-Plastic Materials. Engineering Fracture Mechanics, 130, 96-115.
https://doi.org/10.1016/j.engfracmech.2014.04.034
|
[41]
|
Azevedo, N.M., Lemos, J.V. and Almeida, J.R. (2008) Influence of Aggregate Deformation and Contact Behavior on Discrete Particle Modeling of Fracture of Concrete. En-gineering Fracture Mechanics, 75, 1569-1586.
https://doi.org/10.1016/j.engfracmech.2007.06.008
|
[42]
|
Gu, X.L., Li, H., Wang, Z.L. and Lin, F. (2013) A Modi-fied Rigid-Body-Spring Concrete Model for Prediction of Initial Defects and Aggregates Distribution Effect on Behavior of Concrete. Computational Materials Science, 77, 355-365. https://doi.org/10.1016/j.commatsci.2013.04.050
|
[43]
|
James, P.M., Ford, M. and Jivkov, A.P. (2014) A Novel Particle Failure Criterion for Cleavage Fracture Modeling Allowing Measured Brittle Particle Distributions. Engineering Fracture Mechanics, 121-122, 98-115.
https://doi.org/10.1016/j.engfracmech.2014.03.005
|
[44]
|
Gray, G.G., Morgan, J.K. and Sanz, P.F. (2014) Overview of Continuum and Particle Dynamics Methods for Mechanical Modeling of Contractional Geologic Structures. Journal of Structural Geology, 59, 19-36.
https://doi.org/10.1016/j.jsg.2013.11.009
|
[45]
|
Shmulevich, I., Asaf, Z. and Rubinstein, D. (2007) Interaction be-tween Soil and a Wide Cutting Blade Using the Discrete Element Method. Soil& Tillage Research, 97, 37-50. https://doi.org/10.1016/j.still.2007.08.009
|
[46]
|
Ono, I., Nakashima, H., Shimizu, H., Miyasaka, J. and Ohdoi, K. (2013) Investigation of Elemental Shape for 3D DEM Modeling of Interaction between Soil and a Narrow Cutting Tool. Journal of Terramechanics, 50, 265-276.
https://doi.org/10.1016/j.jterra.2013.09.001
|
[47]
|
Ucgul, M., Fielke, J.M. and Saunders, C. (2014) Three-Dimensional Discrete Element Modeling of Tillage: Determination of a Suitable Contact Model and Parameters for a Cohesionless Soil. Biosystems Engineering, 121, 105-117.
https://doi.org/10.1016/j.biosystemseng.2014.02.005
|
[48]
|
Alizadeh, E., Bertrand, F. and Chaouki, J. (2013) De-velopment of a Granular Normal Contact Force Model Based on a Non-Newtonian Liquid Filled Dashpot. Powder Technology, 237, 202-212.
https://doi.org/10.1016/j.powtec.2013.01.027
|
[49]
|
Arena, A., Piane, C.D. and Sarout, J. (2014) A New Computa-tional Approach to Cracks Quantification from 2D Image Analysis: Application to Micro-Cracks Description in Rocks. Computers & Geoscience, 66, 106-120.
https://doi.org/10.1016/j.cageo.2014.01.007
|
[50]
|
Mak, J., Chen, Y. and Sadek, M.A. (2012) Determining Param-eters of a Discrete Element Model for Soil-Tool Interaction. Soil& Tillage Research, 118, 117-122. https://doi.org/10.1016/j.still.2011.10.019
|
[51]
|
Asaf, Z., Rubinstein, D. and Shmulevich, I. (2007) Determination of Discrete Element Model Parameters Required for Soil Tillage. Soil& Tillage Research, 92, 227-242. https://doi.org/10.1016/j.still.2006.03.006
|
[52]
|
Li, S.J., Wang, Z.Y. and Yu, S. (2019) Estimating Micro-Property Parameters of Concrete Materials Based on Macro-Experimental Data. IOP Conference Series: Earth and Environmental Science, 351, Article ID: 012027.
https://doi.org/10.1088/1755-1315/351/1/012027
|
[53]
|
Kirsch, A. (1996) An Introduction to the Mathematical Theory of Inverse Problem. Springer-Verlag, Berlin.
https://doi.org/10.1007/978-1-4612-5338-9
|
[54]
|
王志云, 李守巨. 混凝土细观本构模型参数反演的估计方法[J]. 黑龙江科技大学学报, 2019, 29(2): 225-261.
|
[55]
|
傅磊, 李小军, 陈苏. 基于经验参考场地的广义线性反演方法[J]. 地震工程学报, 2019, 41(5): 1290-1298.
|
[56]
|
周立, 林强, 范涛. 基于三维应变格林函数反演中小震震源机制[J]. 地震工程学报, 2019, 41(6): 1533-1559.
|
[57]
|
范二平, 薛明喜, 赵欢欢. 三维地震神经网络反演在探明煤层富水灾害层的应用[J]. 地震工程学报, 2018, 40(4): 859-866.
|