[1]
|
Guo, Z.Y., Li, D.Y. and Wang, B.X. (1998) A Novel Concept for Convective Heat Transfer. International Journal of Heat and Mass Transfer, 41, 2221-2225. https://doi.org/10.1016/S0017-9310(97)00272-X
|
[2]
|
Hong, Y.X., Du, J., Wang, S.F., et al. (2017) Heat Transfer and Flow Behaviors of a Wavy Corrugated Tube. Applied Thermal Engineering, 126, 151-166. https://doi.org/10.1016/j.applthermaleng.2017.07.135
|
[3]
|
陈邦强, 李庆生. 横纹槽管管内流动与强化传热三维数值模拟[J]. 化学工程与装备, 2018(11): 14-18.
|
[4]
|
Du, J., Hong, Y.X., Huang, S.M., et al. (2018) Laminar Thermal and Fluid Flow Characteristics in Tubes with Sinusoidal Ribs. International Journal of Heat and Mass Transfer, 120, 635-651.
https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.047
|
[5]
|
Cheng, J.L., Qian, Z.Q. and Wang, Q. (2017) Analysis of Heat Transfer and Flow Resistance of Twisted Oval Tube in Low Reynolds Number Flow. International Journal of Heat and Mass Transfer, 109, 761-777.
https://doi.org/10.1016/j.ijheatmasstransfer.2017.02.061
|
[6]
|
Murasiewicz, H. and Zakrzewska, B. (2019) Large Eddy Simulation of Turbulent Flow and Heat Transfer in a Kenics Static Mixer. Chemical and Process Engineering, 40, 87-99.
|
[7]
|
Zheng, N.B., Yan, F., Zhang, K., et al. (2020) A Review on Single-Phase Convective Heat Transfer Enhancement Based on Multi-Longitudinal Vortices in Heat Exchanger Tubes. Applied Thermal Engineering, 164, Article ID: 114475.
https://doi.org/10.1016/j.applthermaleng.2019.114475
|
[8]
|
Vashistha, C., Patil, A.K. and Kumar, M. (2016) Experimental Investigation of Heat Transfer and Pressure Drop in a Circular Tube with Multiple Inserts. Applied Thermal Engineering, 96, 117-129.
https://doi.org/10.1016/j.applthermaleng.2015.11.077
|
[9]
|
Kumar, B., Srivastava, G., Kumar, M., et al. (2018) A Review of Heat Transfer and Fluid Flow Mechanism in Heat Exchanger Tube with Inserts. Chemical Engineering and Processing: Process Intensification, 123, 126-137.
https://doi.org/10.1016/j.cep.2017.11.007
|
[10]
|
Chokphoemphun, S., Pimsarn, M., Thainpong, C., et al. (2015) Thermal Performance of Tubular Heat Exchanger with Multiple Twisted-Tape inserts. Chinese Journal of Chemical En-gineering, 23, 755-762.
https://doi.org/10.1016/j.cjche.2015.01.003
|
[11]
|
Li, P.X., Liu, Z.C., Liu, W., et al. (2015) Numerical Study on Heat Transfer Enhancement Characteristics of Tube Inserted with Centrally Hollow Narrow Twisted Tapes. International Journal of Heat and Mass Transfer, 88, 481-491.
https://doi.org/10.1016/j.ijheatmasstransfer.2015.04.103
|
[12]
|
Zhang, X.Y., Liu, Z.C. and Liu, W. (2012) Numerical Studies on Heat Transfer and Flow Characteristics for Laminar Flow in a Tube with Multiple Regularly Spaced Twisted Tapes. International Journal of Thermal Sciences, 58, 157- 167. https://doi.org/10.1016/j.ijthermalsci.2012.02.025
|
[13]
|
Eiamsa-Ard, S., Wongcharee, K., Eiamsa-Ard, P., et al. (2010) Heat Transfer Enhancement in a Tube Using Delta-Winglet Twisted Tape Inserts. Applied Thermal Engineering, 30, 310-318.
https://doi.org/10.1016/j.applthermaleng.2009.09.006
|
[14]
|
Murugesan, P., Mayilsamy, K. and Suresh, S. (2010) Turbulent Heat Transfer and Pressure Drop in Tube Fitted with Square- Cut Twisted Tape. Chinese Journal of Chemical Engineering, 18, 609-617.
https://doi.org/10.1016/S1004-9541(10)60264-9
|
[15]
|
Eiamsa-Ard, S. and Promvonge, P. (2010) Thermal Characteristics in Round Tube Fitted with Serrated Twisted Tape. Applied Thermal Engineering, 30, 1673-1682. https://doi.org/10.1016/j.applthermaleng.2010.03.026
|
[16]
|
Bhuiya, M., Chowdhury, M., Saha, M., et al. (2013) Heat Transfer and Friction Factor Characteristics in Turbulent Flow through a Tube Fitted with Perforated Twisted Tape Inserts. International Communications in Heat and Mass Transfer, 46, 49-57. https://doi.org/10.1016/j.icheatmasstransfer.2013.05.012
|
[17]
|
Murugesan, P., Mayilsamy, K., Suresh, S., et al. (2011) Heat Transfer and Pressure Drop Characteristics in a Circular Tube Fitted with and without V-Cut Twisted Tape Insert. International Communications in Heat and Mass Transfer, 38, 329-334. https://doi.org/10.1016/j.icheatmasstransfer.2010.11.010
|
[18]
|
Yu, Y.F., Wang, H.Y., Song, M.Y., et al. (2016) The Effects of Element Direction and Intersection Angle of Adjacent Q-Type Inserts on the Laminar Flow and Heat Transfer. Applied Thermal Engineering, 94, 282-295.
https://doi.org/10.1016/j.applthermaleng.2015.10.092
|
[19]
|
Pérez-García, J., García, A., Herrero, M.R., et al. (2018) Experimental Correlations on Critical Reynolds Numbers and Friction Factor in Tubes with Wire-Coil Inserts in Laminar, Transitional and Low Turbulent Flow Regimes. Experimental Thermal and Fluid Science, 91, 64-79. https://doi.org/10.1016/j.expthermflusci.2017.10.003
|
[20]
|
Tusar, M., Ahmed, K., Bhuiya, M., et al. (2019) CFD Study of Heat Transfer Enhancement and Fluid Flow Characteristics of Laminar Flow through Tube with Helical Screw Tape Insert. Energy Procedia, 160, 699-706.
https://doi.org/10.1016/j.egypro.2019.02.190
|
[21]
|
Omara, M. (2016) Heat Transfer Performance through a Flat Tube Using Rotary Helical Screw-Tape Inserts. Experimental Heat Transfer, 29, 691-706. https://doi.org/10.1080/08916152.2015.1086842
|
[22]
|
朱冬生, 蒋翔. 管壳式换热器壳程高黏度流体的传热强化[J]. 化工学报, 2005; 56(8): 1451-1455.
|
[23]
|
Pawar, S.S. and Sunnapwar, V.K. (2014) Experimental and CFD In-vestigation of Convective Heat Transfer in Helically Coiled Tube Heat Exchanger. Chemical Engineering Research and Design, 92, 2294-2312.
https://doi.org/10.1016/j.cherd.2014.01.016
|
[24]
|
Karimov, R.M., Zaplatin, A.V. and Tashbulatov, R.R. (2019) Coiled Heat Exchanger with Small Radius Bent Tubes for Controlled Heat Treatment of High-Viscosity Waxy Oil. IOP Conference Series: Earth and Environmental Science, 272, Article ID: 022193. https://doi.org/10.1088/1755-1315/272/2/022193
|
[25]
|
施龙生, 张鸿晨, 俞金芳, 等. 一种强化传热混合换热装置[P]. 中国专利, 106225520 B. 2017-04-19.
|
[26]
|
杨蕴辉, 陈东辉, 施龙生, 等. 一种塔式聚合反应器[P]. 中国专利, 203484150 U. 2014-03-19.
|
[27]
|
Maakoul, A.E., Laknizi, A., Saadeddine, S., et al. (2016) Numerical Comparison of Shell-Side Performance for Shell and Tube Heat Exchangers with Trefoil-Hole, Helical and Segmental Baffles. Applied Thermal Engineering, 109, 175- 185. https://doi.org/10.1016/j.applthermaleng.2016.08.067
|
[28]
|
夏红卫. 换热和混合设备的CFD模拟[D]: [硕士学位论文]. 青岛: 中国海洋大学, 2009.
|
[29]
|
Lei, Y.G., Li, Y.Z., Jing, S.L., et al. (2017) Design and Performance Analysis of the Novel Shell-and-Tube Heat Exchangers with Louver Baffles. Applied Thermal Engineering, 125, 870-879.
https://doi.org/10.1016/j.applthermaleng.2017.07.081
|
[30]
|
古新, 罗元坤, 熊晓朝, 等. 扭转流换热器结构参数对流场和温度场的影响[J]. 化工学报, 2018, 69(8): 3390-3397.
|
[31]
|
Movassag, S.Z., Taher, F.N., Razmi, K., et al. (2013) Tube Bundle Replacement for Segmental and Helical Shell and Tube Heat Exchangers: Performance Comparison and Fouling Investigation on the shell Side. Applied Thermal Engineering, 51, 1162-1169. https://doi.org/10.1016/j.applthermaleng.2012.10.025
|
[32]
|
Zhang, J.F., He, Y.L. and Tao, W.Q. (2009) 3D Nu-merical Simulation on Shell-and-Tube Heat Exchangers with Middle-Overlapped Helical Baffles and Continuous Baffles Part II: Simulation Results of Periodic Model and Comparison between Continuous and Non-Continuous Helical Baffles. International Journal of Heat and Mass Transfer, 52, 5381- 5389. https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.007
|
[33]
|
Du, W.J., Wang, H.F. and Cheng, L. (2014) Effects of Shape and Quantity of Helical Baffle on the Shell-Side Heat Transfer and Flow Performance of Heat Exchangers. Chinese Journal of Chemical Engineering, 22, 243-251.
https://doi.org/10.1016/S1004-9541(14)60041-0
|
[34]
|
Yang, S.F., Chen, Y.P., Wu, J.F., et al. (2020) Investigation on Shell Side Performance in Half-Cylindrical Desuperheating Zone of Ladder Type Helical Baffle Heat Exchangers. Ap-plied Thermal Engineering, 175, Article ID: 115334.
https://doi.org/10.1016/j.applthermaleng.2020.115334
|
[35]
|
Wang, S.M., Xiao, J., Ye, S.P., et al. (2018) Numerical Investigation on Pre-Heating of Coal Water Slurry in Shell- and-Tube Heat Exchangers with Fold Helical Baffles. International Journal of Heat and Mass Transfer, 126, 1347- 1355. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.060
|
[36]
|
魏国志, 李华峰, 柯双兵, 等. 三叶孔板强化换热性能及机理分析[J]. 化工进展, 2017, 36(2): 465-472.
|
[37]
|
Ma, L., Wang, K., Liu, M.S., et al. (2017) Numerical Study on Performances of Shell-Side in Trefoil-Hole and Quatrefoil-Hole Baffle Heat Exchangers. Applied Thermal Engineering, 123, 1444-1455.
https://doi.org/10.1016/j.applthermaleng.2017.05.097
|
[38]
|
王丽丽, 马贵阳. 纵流式换热器结构优化研究进展[J]. 当代化工, 2016, 45(8): 1937-1939.
|
[39]
|
Bharadwaj, P., Khondge, A.D. and Date, A.W. (2009) Heat Transfer and Pressure Drop in a Spirally Grooved Tube with Twisted Tape Insert. International Journal of Heat and Mass Transfer, 52, 1938-1944.
https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.038
|
[40]
|
Hong, Y.X., Deng, X.H. and Zhang, L.S. (2012) 3D Numerical Study on Compound Heat Transfer Enhancement of Converging-Diverging Tubes Equipped with Twin Twisted Tapes. Chinese Journal of Chemical Engineering, 20, 589- 601. https://doi.org/10.1016/S1004-9541(11)60223-1
|
[41]
|
Rout, P.K. and Saha, S.K. (2013) Laminar Flow Heat Transfer and Pressure Drop in a Circular Tube Having Wire-Coil and Helical Screw-Tape Inserts. Journal of Heat Transfer, 135, Article ID: 021901. https://doi.org/10.1115/1.4007415
|
[42]
|
Bhattaacharyya, S., Benim, A.C., Chattopadhyay, H., et al. (2019) Experimental Investigation of Heat Transfer Performance of Corrugated Tube with Spring Tape Inserts. Experimental Heat Transfer, 32, 411-425.
https://doi.org/10.1080/08916152.2018.1531955
|
[43]
|
Emani, M.S., Ranjan, H., Bharti, A.K., et al. (2019) Laminar Flow Heat Transfer Enhancement in Square and Rectangular Channels Having: (1) A Wire-Coil, Axial and Spiral Corrugation Combined with Helical Screw-Tape with and without Oblique Teeth and a (2) Spiral Corrugation Combined with Twisted Tapes with Oblique Teeth. International Journal of Heat and Mass Transfer, 144, Article ID: 118707. https://doi.org/10.1016/j.ijheatmasstransfer.2019.118707
|
[44]
|
Shha, S. and Saha, S.K. (2013) Enhancement of Heat Transfer of Laminar Flow of Viscous Oil through a Circular Tube Having Integral Helical Rib Roughness and Fitted with Helical Screw-Tapes. Experimental Thermal and Fluid Science, 47, 81-89. https://doi.org/10.1016/j.expthermflusci.2013.01.003
|
[45]
|
Rainieri, S., Bozzoli, F. and Cattani, L. (2013) Compound Convective Heat Transfer Enhancement in Helically Coiled Wall Corrugated Tubes. International Journal of Heat and Mass Transfer, 59, 353-362.
https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.037
|
[46]
|
Chang, S.W., Wu, P.S., Cai, W.L., et al. (2020) Turbulent Flow and Heat Transfer of Helical Coils with Twisted Section. Applied Thermal Engineering, 180, Article ID: 115919. https://doi.org/10.1016/j.applthermaleng.2020.115919
|