[1]
|
王志刚, 何宁, 武凯, 赵威. 薄壁件加工变形因素综合分析[C]//第四次江苏科技论坛机械装备制造分论坛论文汇编. 南京: 江苏科技论坛机械装备制造分论坛, 2003: 37-41.
|
[2]
|
张云峰, 曹岩. 薄壁件加工变形分析与控制[J]. 科技信息(科学教研), 2008(8): 200+245.
|
[3]
|
Bowden, D.M. and Halley, J.E. (2001) Aluminium Reliability Improvement Program—Final Report 60606. The Boeing Company, Chicago.
|
[4]
|
Nervi, S., Szabó, B.A. and Young, K.A. (2009) Prediction of Distortion of Airframe Components Made from Aluminum Plates. AIAA Journal, 47, 1635-1641. https://doi.org/10.2514/1.37233
|
[5]
|
Yang, Y., Li, X., Li, L., He, N., Zhao, G., Chen, N., Hui, L. and Zhou, Z. (2019) Investigation on Deformation of Single-Sided Stringer Parts Based on Fluctuant Initial Residual Stress. Journal of Materials Processing Technology, 271, 623-633. https://doi.org/10.1016/j.jmatprotec.2019.04.031
|
[6]
|
Gao, H., Zhang, Y., Wu, Q., and Song, J. (2017) An Analytical Model for Predicting the Machining Deformation of a Plate Blank Considers Biaxial Initial Residual Stresses. The International Journal of Advanced Manufacturing Technology, 93, 1473-1486. https://doi.org/10.1007/s00170-017-0528-2
|
[7]
|
Gao, H., Zhang, Y., Wu, Q. and Li, B. (2018) Investigation on Influ-ences of Initial Residual Stress on Thin-Walled Part Machining Deformation Based on a Semi-Analytical Model. Journal of Materials Processing Technology, 262, 437-448. https://doi.org/10.1016/j.jmatprotec.2018.04.009
|
[8]
|
王树宏. 航空铝合金厚板初始残余应力及其对铣削变形影响的基础研究[D]: [博士学位论文]. 南京: 南京航空航天大学, 2005.
|
[9]
|
Fergani, O., Lazoglu, I., Mkaddem, A., El Mansori, M. and Liang, S.Y. (2014) Analytical Modeling of Residual Stress and the Induced Deflection of a Milled Thin Plate. The International Journal of Advanced Manufacturing Technology, 75, 455-463. https://doi.org/10.1007/s00170-014-6146-3
|
[10]
|
Fergani, O., Mamedov, A., Lazoglu, I., Yang, J.G. and Liang, S.Y. (2014) Prediction of Residual Stress Induced Distortions in Micro-Milling of Al7050 Thin Plate. In: Applied Mechanics and Materials, Vol. 472, Trans Tech Publications Ltd., Bäch, 677-681. https://doi.org/10.4028/www.scientific.net/AMM.472.677
|
[11]
|
Fergani, O., Jiang, X. and Welo, T. (2016) Analysis of Residual Stress-Induced Distortions of Thin Sheet Structures in Multi-Step Milling. AIP Conference Proceedings, 1769, Article ID: 080014. https://doi.org/10.1063/1.4963489
|
[12]
|
Wang, S.P. and Padmanaban, S. (2004) A New Approach for FEM Simulation of NC Machining Processes. AIP Conference Proceedings, 712, 1371-1376. https://doi.org/10.1063/1.1766720
|
[13]
|
Wei, Y. and Wang, X.W. (2007) Computer Simulation and Experimental Study of Machining Deflection Due to Original Residual Stress of Aerospace Thin-Walled Parts. The International Journal of Advanced Manufacturing Technology, 33, 260-265. https://doi.org/10.1007/s00170-006-0470-1
|
[14]
|
Tang, Z.T., Yu, T., Xu, L.Q. and Liu, Z.Q. (2013) Machining Deformation Prediction for Frame Components Considering Multifactor Coupling Effects. The International Journal of Advanced Manufacturing Technology, 68, 187-196.
https://doi.org/10.1007/s00170-012-4718-7
|
[15]
|
Bi, Y.B., Cheng, Q.L., Dong, H.Y. and Ke, Y.L. (2009) Machining Distortion Prediction of Aerospace Monolithic Components. Journal of Zhejiang University—SCIENCE A, 10, 661-668. https://doi.org/10.1631/jzus.A0820392
|
[16]
|
Cerutti, X. and Mocellin, K. (2015) Parallel Finite Element Tool to Predict Distortion Induced by Initial Residual Stresses during Machining of Aeronautical Parts. International Journal of Material Forming, 8, 255-268.
https://doi.org/10.1007/s12289-014-1164-0
|
[17]
|
Cerutti, X., Arsene, S. and Mocellin, K. (2016) Prediction of Machining Quality Due to the Initial Residual Stress Redistribution of Aerospace Structural Parts Made of Low-Density Aluminium Alloy Rolled Plates. International Journal of Material Forming, 9, 677-690. https://doi.org/10.1007/s12289-015-1254-7
|
[18]
|
Cerutti, X. and Mocellin, K. (2016) Influence of the Machining Sequence on the Residual Stress Redistribution and Machining Quality: Analysis and Improvement Using Numerical Simulations. The In-ternational Journal of Advanced Manufacturing Technology, 83, 489-503. https://doi.org/10.1007/s00170-015-7521-4
|
[19]
|
Ma, Y., Zhang, J., Yu, D., Feng, P. and Xu, C. (2019) Modeling of Machining Distortion for Thin-Walled Components Based on the Internal Stress Field Evolution. The International Journal of Advanced Manufacturing Technology, 103, 3597-3612. https://doi.org/10.1007/s00170-019-03736-9
|
[20]
|
周金华. 薄壁结构切削残余应力建模及变形预测[D]: [博士学位论文]. 西安: 西北工业大学, 2018.
|
[21]
|
王骏腾. 薄壁件铣削残余应力变形的感知预测与工艺优化方法[D]: [博士学位论文]. 西安: 西北工业大学, 2018.
|
[22]
|
Huang, X., Sun, J. and Li, J. (2015) Finite Element Simulation and Experimental Investigation on the Residual Stress-Related Monolithic Component Defor-mation. The International Journal of Advanced Manufacturing Technology, 77, 1035-1041. https://doi.org/10.1007/s00170-014-6533-9
|
[23]
|
Huang, X., Sun, J. and Li, J. (2015) Effect of Initial Residual Stress and Machining-Induced Residual Stress on the Deformation of Aluminium Alloy Plate. Strojniski Vestnik/Journal of Mechanical Engineering, 61, 131-137.
https://doi.org/10.5545/sv-jme.2014.1897
|
[24]
|
Young, K.A. (2005) Machining-Induced Residual Stress and Distortion of Thin Parts. Ph.D. Thesis, Washington University, Saint Louis. https://doi.org/10.4271/2005-01-3317
|
[25]
|
Ma, K., Goetz, R. and Srivatsa, S.K. (2010) Modeling of Residual Stress and Machining Distortion in Aerospace Components (Preprint). Air Force Research Lab Wright-Patterson AFB OH Materials and Manufacturing Directorate.
|
[26]
|
Sim, W.M. (2011) Residual Stress Engineering in Manufacture of Aerospace Structural Parts. 3rd International Conference on Distortion Engineering, Bremen, 14-16 September 2011, 187-194.
|
[27]
|
Zhang, S., Wu, Y. and Gong, H. (2012) A Modeling of Residual Stress in Stretched Aluminum Alloy Plate. Journal of Materials Processing Technology, 212, 2463-2473. https://doi.org/10.1016/j.jmatprotec.2012.06.019
|
[28]
|
Koc, M., Culp, J. and Altan, T. (2006) Prediction of Residual Stresses in Quenched Aluminum Blocks and Their Reduction through Cold Working Processes. Journal of Materials Pro-cessing Technology, 174, 342-354.
https://doi.org/10.1016/j.jmatprotec.2006.02.007
|
[29]
|
Husson, R., Dantan, J.Y., Baudouin, C., Silvani, S., Scheer, T. and Bigot, R. (2012) Evaluation of Process Causes and Influences of Residual Stress on Gear Distortion. CIRP Annals, 61, 551-554. https://doi.org/10.1016/j.cirp.2012.03.106
|
[30]
|
Masoudi, S., Amirian, G., Saeedi, E. and Ahmadi, M. (2015) The Effect of Quench-Induced Residual Stresses on the Distortion of Machined Thin-Walled Parts. Journal of Materials Engineering and Performance, 24, 3933-3941.
https://doi.org/10.1007/s11665-015-1695-7
|
[31]
|
孙杰. 航空整体结构件数控加工变形校正理论和方法研究[D]: [博士学位论文]. 杭州: 浙江大学, 2003.
|
[32]
|
Landwehr, M., Oehler, F., Behnken, H., Holling, H., Sambathkumar, R., Ganser, P. and Bergs, T. (2021) Influence of Heat Treatment on the Residual Stress-Related Machining Distortion of Ti-6Al-4V Alloy Monolithic Parts. Procedia CIRP, 104, 1328-1333. https://doi.org/10.1016/j.procir.2021.11.223
|
[33]
|
Wang, J.S., Hsieh, C.C., Lin, C.M., Chen, E.C., Kuo, C.W. and Wu, W. (2014) The Effect of Residual Stress Relaxation by the Vibratory Stress Relief Technique on the Textures of Grains in AA 6061 Aluminum Alloy. Materials Science and Engineering: A, 605, 98-107. https://doi.org/10.1016/j.msea.2014.03.037
|
[34]
|
熊冠华. 振动时效对铝合金薄壁构件尺寸稳定性的影响[D]: [硕士学位论文]. 长沙: 中南林业科技大学, 2018.
|
[35]
|
刘嘉辰, 王金亮, 陈慧琴. 高强铝合金超厚板淬火残余应力及其冷压缩消除过程分析[J]. 轻合金加工技术, 2014, 42(9): 27-32+47.
|
[36]
|
王秋成, 柯映林. 深冷处理消除7050铝合金残余应力的研究[J]. 浙江大学学报(工学版), 2003(6): 120-123.
|
[37]
|
吴红兵. 航空框类整体结构件铣削加工变形的数值模拟与实验研究[D]: [博士学位论文]. 杭州: 浙江大学, 2008.
|
[38]
|
柯烈强. 航空框类结构件铣削加工残余应力抑制策略研究[D]: [硕士学位论文]. 芜湖: 安徽工程大学, 2010.
|
[39]
|
武凯, 何宁, 廖文和, 宋良煌, 陈雪梅. 阶梯对称铣削工艺在薄壁件精密加工中的应用[J]. 航空精密制造技术, 2005(5): 46-47+50.
|
[40]
|
Wu, Q., Li, D.P. and Zhang, Y.D. (2016) Detecting Milling Deformation in 7075 Aluminum Alloy Aeronautical Monolithic Components Using the Quasi-Symmetric Machining Method. Metals, 6, 80.
https://doi.org/10.3390/met6040080
|
[41]
|
Yang, Y.F., Fan, L.X., Li, L., Zhao, G.L., Han, N., Li, X.Y., Tian, H. and He, N. (2020) Energy Principle and Material Removal Sequence Optimization Method in Machining of Aircraft Monolithic Parts. Chi-nese Journal of Aeronautics, 33, 2770-2781. https://doi.org/10.1016/j.cja.2020.05.018
|
[42]
|
Fan, L., Li, L., Yang, Y., Zhao, G., Han, N., Tian, H. and He, N. (2021) Control of Machining Distortion Stability in Machining of Monolithic Aircraft Parts. The International Journal of Advanced Manufacturing Technology, 112, 3189-3199. https://doi.org/10.1007/s00170-021-06605-6
|
[43]
|
张以都, 张洪伟. 航空整体结构件加工变形有限元数值仿真[J]. 北京航空航天大学学报, 2009, 35(2): 188-192.
|
[44]
|
Dreier, S., Brüning, J. and Denkena, B. (2016) Simulation Based Reduction of Residual Stress Related Part Distortion. Materialwissenschaft und Werkstofftechnik, 47, 710-717. https://doi.org/10.1002/mawe.201600604
|
[45]
|
王华敏, 秦国华, 林锋, 左敦稳, 韩雄, 陈雪梅. 面向7075-T7451铝合金厚板加工变形控制的变向迭代优化方法[J]. 稀有金属材料与工程, 2019, 48(4): 1239-1248.
|
[46]
|
Li, B., Jiang, X., Yang, J. and Liang, S.Y. (2015) Effects of Depth of Cut on the Redistribution of Residual Stress and Distortion during the Milling of Thin-Walled Part. Journal of Materials Processing Technology, 216, 223-233.
https://doi.org/10.1016/j.jmatprotec.2014.09.016
|
[47]
|
Masoudi, S., Amini, S., Saeidi, E. and Eslami-Chalander, H. (2015) Effect of Machining-Induced Residual Stress on the Distortion of Thin-Walled Parts. The International Journal of Advanced Manufacturing Technology, 76, 597-608.
https://doi.org/10.1007/s00170-014-6281-x
|
[48]
|
刘海涛. 精密薄壁回转体零件加工残余应力及变形的研究[D]: [博士学位论文]. 哈尔滨: 哈尔滨工业大学, 2010.
|
[49]
|
丛靖梅, 莫蓉, 吴宝海, 王骏腾. 薄壁件残余应力变形仿真预测与切削参数优化[J]. 机械科学与技术, 2019, 38(2): 205-210.
|
[50]
|
Xue, L.F., Chen, W.F., Feng, T. and Ma, W.T. (2014) Syn-chronous Optimization of Clamping Force and Cutting Parameters for Thin-Walled Parts. In: Advanced Materials Research, Vol. 900, Trans Tech Publications Ltd., Bäch, 623-626.
https://doi.org/10.4028/www.scientific.net/AMR.900.623
|
[51]
|
Denkena, B., Boehnke, D. and de Leon, L. (2008) Ma-chining Induced Residual Stress in Structural Aluminum Parts. Production Engineering, 2, 247-253. https://doi.org/10.1007/s11740-008-0097-1
|
[52]
|
何宁, 杨吟飞, 李亮, 赵威. 航空结构件加工变形及其控制[J]. 航空制造技术, 2009, 52(6): 32-35.
|
[53]
|
付秀丽, 艾兴, 张松, 潘永智. 航空整体结构件的高速切削加工[J]. 工具技术, 2006(3): 80-83.
|
[54]
|
单英吉, 孙树强, 杨巍. 高速切削技术在飞机结构件加工中的应用研究[J]. 中国新技术新产品, 2016(8): 16-17.
|
[55]
|
江宏志. 浅谈民用航空薄壁结构件加工方法与应用[J]. 山东工业技术, 2018(3): 8+127.
|
[56]
|
郭魂, 左敦稳, 王树宏, 王焱, 王珉. 拉伸装夹对航空框类零件加工变形影响的有限元分析[J]. 南京航空航天大学学报, 2005(S1): 72-76.
|
[57]
|
董辉跃, 柯映林. 铣削加工中薄壁件装夹方案优选的有限元模拟[J]. 浙江大学学报(工学版), 2004, 38(1): 18-22.
|
[58]
|
Li, Y., Liu, C., Hao, X., Gao, J.X. and Maropoulos, P.G. (2015) Responsive Fixture Design Using Dynamic Product Inspection and Monitoring Technologies for the Precision Machining of Large-Scale Aerospace Parts. CIRP Annals, 64, 173-176. https://doi.org/10.1016/j.cirp.2015.04.025
|
[59]
|
Yu, J.H., Chen, Z.T. and Jiang, Z.P. (2016) A Con-trol Process for Machining Distortion by Using an Adaptive Dual- Sphere Fixture. The International Journal of Advanced Manufacturing Technology, 86, 3463-3470.
https://doi.org/10.1007/s00170-016-8470-2
|
[60]
|
于建华, 陈志同. 双臂自适应夹具加工变形控制方法[J]. 航空学报, 2016, 37(5): 1657-1665.
|