[1]
|
胡林, 谷子逸, 王丹琦, 等. 汽车安全性测评规程现状及趋势展望[J]. 汽车工程, 2024, 46(2): 187-200 240. https://doi.org/10.19562/j.chinasae.qcgc.2024.02.001
|
[2]
|
张升超. 汽车车轮轻量化设计[D]: [硕士学位论文]. 青岛: 青岛大学, 2020. https://doi.org/10.27262/d.cnki.gqdau.2020.002060
|
[3]
|
唐珍珍. 汽车车轮的结构强度分析[J]. 时代汽车, 2022(15): 151-153.
|
[4]
|
刘旌扬. 汽车车轮的试验方法及试验结果分析[J]. 汽车技术, 1987(12): 20-29.
|
[5]
|
赵玉军. 现代汽车车轮性能检测与分析[D]: [硕士学位论文]. 南京: 南京理工大学, 2015.
|
[6]
|
任山, 朱其文, 杜天强. 汽车车轮性能试验方法及标准[J]. 天津汽车, 2003(2): 21-25.
|
[7]
|
董云, 代军. 后WTO时代新汽车产业政策分析[J]. 时代经贸, 2006, 4(9): 6-7.
|
[8]
|
雷娜. 简述车轮标准现状和标准的制修订情况[J]. 汽车零部件, 2012(9): 31-32. https://doi.org/10.19466/j.cnki.1674-1986.2012.09.006
|
[9]
|
GB/T 15704-2012标准修订解读[J]. 汽车零部件, 2013(6): 27.
|
[10]
|
张子鹏, 任念祖, 张新峰. GB 36581-2018《汽车车轮安全性能要求及试验方法》解读[J]. 中国汽车, 2019(8): 47-51.
|
[11]
|
中华人民共和国工业和信息化部. GB 36581-2018汽车车轮安全性能要求及试验方法[S]. 北京: 中国标准出版社, 2018.
|
[12]
|
全国汽车标准化技术委员会. GB/T 5334-2021乘用车车轮弯曲和径向疲劳性能要求及试验方法[S]. 北京: 中国标准出版社, 2021.
|
[13]
|
ISO 3006:2015 Road Vehicles—Passenger Car Wheels for Road Use—Test Methods.
|
[14]
|
SAE J328_202107 Wheels—Passenger Car and Light Truck Performance Requirements and Test Procedures.
|
[15]
|
SAE J2530_202109 Aftermarket Wheels—Passenger Cars and Light Truck Performance Requirements and Test Procedures.
|
[16]
|
JIS D 4103:2015自動車部品−ホイール−性能及び表示.
|
[17]
|
AK-LH 08-2008 Wheels Requirements and Tests.
|
[18]
|
ECE R-124 Type Approval of Wheels of Passenger Cars and Trailers.
|
[19]
|
全国汽车标准化技术委员会. GB/T 15704-2012道路车辆轻合金车轮冲击试验方法[S]. 北京: 中国标准出版社, 2013.
|
[20]
|
ISO 7141:2022 Road Vehicles—Light Alloy Wheels—Lateral Impact Test.
|
[21]
|
SAE J 175_2020 Wheels—Lateral Impact Test Procedure—Road Vehicles.
|
[22]
|
GMW14910-2017 Wheel Lateral Impact Test.
|
[23]
|
全国汽车标准化技术委员会. QC/T 991-2015乘用车轻合金车轮90˚冲击试验方法[S]. 北京: 中国计划出版社, 2015.
|
[24]
|
中华人民共和国工业和信息化部. QC/T 258-2013汽车车轮螺母座强度试验[S]. 北京: 中国计划出版社, 2014.
|
[25]
|
ISO 15172:2005 Road Vehicles—Wheels—Nut Seat Strength Tests.
|
[26]
|
全国轮胎轮辋标准化技术委员会. GB/T 3487-2015乘用车轮辋规格系列[S]. 北京: 中国标准出版社, 2016.
|
[27]
|
全国汽车标准化技术委员会. QC/T 717-2015汽车车轮跳动要求和检测方法[S]. 北京: 中国计划出版社, 2015.
|
[28]
|
ISO 16833:2006 Road Vehicles—Wheels—Measurement of Radial and Lateral Run-Out.
|
[29]
|
全国汽车标准化技术委员会. QC/T 1112-2019乘用车车轮双轴疲劳试验方法[S]. 北京: 北京科学技术出版社, 2019
|
[30]
|
SAE J2562-2021 Biaxial Wheel Fatigue Test.
|
[31]
|
EUWA ES3.23-2017 Biaxial Fatigue Test for Truck Wheels.
|
[32]
|
GMW 14340-2018 Biaxial Wheel Fatigue Test.
|
[33]
|
李世德. 汽车车轮跳动检测方法及应用研究[J]. 民营科技, 2017(3): 54.
|
[34]
|
孙娜, 孙华文, 张振伟, 等. 乘用车轮毂性能试验仿真方法综述[J]. 智能制造, 2022(4): 72-78.
|
[35]
|
邱祖峰, 罗茶根, 舒华英. 基于CAE与试验对标方法的汽车车轮研究[J]. 机械工程与自动化, 2023(6): 81-83.
|
[36]
|
徐恒斌, 顾佳超, 孟凡荣. 汽车车轮弯曲疲劳试验机国内外研究现状综述[J]. 科技创新与应用, 2014(34): 65.
|
[37]
|
刘建功, 王德民. 新型悬臂式汽车车轮弯曲疲劳试验机的研制[J]. 机械工程与自动化, 2014(6): 94-95, 98. https://doi.org/10.3969/J.Issn.1672-6413.2014.06.038
|
[38]
|
曹伟. 车轮径向疲劳试验机研制[D]: [硕士学位论文]. 长春: 长春理工大学, 2012.
|
[39]
|
陈国刚, 李世德. 汽车车轮径向冲击机技术指标的核查验证方法[J]. 民营科技, 2017(1): 52.
|
[40]
|
尹冀. 汽车钢制车轮的冲击性能仿真与轻量化研究[D]: [硕士学位论文]. 上海: 上海交通大学, 2013.
|
[41]
|
岳凯. 汽车车轮冲击试验机研制[D]: [硕士学位论文]. 长春: 长春理工大学, 2012.
|
[42]
|
刘鑫. 铝合金车轮双轴疲劳试验和应力应变分析[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2018.
|
[43]
|
刘振国, 王春辉, 杨春旺. 车轮双轴疲劳测试技术的发展概述[J]. 时代汽车,2022(20): 13-15 180.
|
[44]
|
佟林. 铝合金车轮双轴疲劳试验失效分析及应用研究[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2017.
|
[45]
|
王晓迪. 铝合金车轮双轴疲劳试验数值模拟研究[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2014.
|
[46]
|
朱英伟, 吕金旗, 王柱兴. 汽车车轮双轴疲劳试验仿真方法[J]. 汽车工业研究, 2018(3): 53-55.
|
[47]
|
Raju, P.R., Satyanarayana, B., Ramji, K., et al. (2009) Evaluation of Fatigue Life of Aluminium Alloy Wheels under Bending Loads. Fatigue & Fracture of Engineering Materials & Structures, 32, 119-126. https://doi.org/10.1111/j.1460-2695.2008.01316.x
|
[48]
|
Nallusamy, S., Prabu, N.M., Balakannan, K., et al. (2015) Analysis of Static Stress in an Alloy Wheel of the Passengercar. International Journal of Engineering Research in Africa, 16, 17-25. https://doi.org/10.4028/www.scientific.net/JERA.16.17
|
[49]
|
Koppisetti, S.B., Nallu, R. and Penmetsa, R.R. (2022) Passenger Cars Wheel Performance Test Simulation for Service Life Evaluation: A Review. Journal of Failure Analysis and Prevention, 22, 1370-1392. https://doi.org/10.1007/s11668-022-01447-0
|
[50]
|
叶舟, 李烜, 王金粉. 铝合金车轮双轴疲劳试验仿真分析[J]. 机械制造, 2022, 60(4): 59-61 64.
|
[51]
|
Dong, Z.C., Wang, X.F., Zhang, X.G., et al. (2020) Fatigue Life Prediction for the Steel Passenger Car Wheel in the Dynamic Cornering Fatigue Test. Strength of Materials, 52, 662-682. https://doi.org/10.1007/s11223-020-00217-3
|
[52]
|
Reza Kashyzadeh, K., Souri, K., Gharehsheikh Bayat, A., et al. (2022) Fatigue Life Analysis of Automotive Cast Iron Knuckle under Constant and Variable Amplitude Loading Conditions. Applied Mechanics, 3, 517-532. https://doi.org/10.3390/applmech3020030
|
[53]
|
Jiang, Q., Zhao, Z., Xu, Z., et al. (2022) Effect of Residual Stresses on Wheel Fatigue Life and Experimental Validation. Machines, 10, Article 924. https://doi.org/10.3390/machines10100924
|
[54]
|
王铁, 田程, 李旭东, 等. 车轮双轴疲劳加速试验方法研究[J]. 汽车工程, 2022, 44(9): 1410-1415 1424. https://doi.org/10.19562/J.Chinasae.Qcgc.2022.09.012
|
[55]
|
Kong, Y.S., Abdullah, S., Schramm, D., et al. (2019) Optimization of Spring Fatigue Life Prediction Model for Vehicle Ride Using Hybrid Multi-Layer Perceptron Artificial Neural Networks. Mechanical Systems and Signal Processing, 122, 597-621. https://doi.org/10.1016/j.ymssp.2018.12.046
|
[56]
|
Luo, J., Shan, Y., Liu, X., et al. (2023) A Rapid Method to Predict Biaxial Fatigue Life of Automotive Wheels Using Proper Orthogonal Decomposition and Radial Basis Function Algorithm. Advances in Engineering Software, 186, Article 103543. https://doi.org/10.1016/j.advengsoft.2023.103543
|
[57]
|
王铁, 李旭东, 田程, 等. 基于多轴载荷投影构建轮辋双轴疲劳损伤模型[J/OL]. https://doi.org/10.13229/j.cnki.jdxbgxb20220307, 2024-03-14.
|