外置钢板对套筒连接装配式桥墩抗震性能影响的试验研究
Experimental Study on the Influence of External Steel Plates on the Seismic Performance of Sleeve-Connected Fabricated Bridge Piers
DOI: 10.12677/HJCE.2022.116085, PDF,   
作者: 梁东伟：中冶京诚工程技术有限公司，北京；王超凡*：东北林业大学土木工程学院，黑龙江 哈尔滨
关键词: 振动台试验；外置钢板；灌浆套筒；装配式桥墩；抗震性能；Shaking Table Tests； External Steel Plates； Grouted Sleeves； Fabricated Piers； Seismic Performance
摘要: 为了提高灌浆套筒置于承台基础中装配式桥墩的抗震性能，采用外置钢板对其加固，并制作未加外置钢板的装配式桥墩和现浇桥墩作对比，开展振动台试验。对三种桥墩的动力特性，加速度和位移响应进行测试并分析。结果表明：各个桥墩均为受弯破坏。三种桥墩加速度和位移响应虽有一定差异但表现形式相似。加载结束时，外置钢板桥墩的自振频率最大，刚度最大，损伤最小。外置钢板加强了装配式桥墩核心混凝土约束，使得整体抗震性能有所提高，是一种有效提升装配式桥墩抗震性能的方式。
Abstract: To improve the seismic performance of fabricated piers with grouted sleeves placed in the foundation of the bearing, external steel plates were used to reinforce them and shaking table tests were carried out to compare fabricated piers without external steel plates with cast-in-place piers. The dynamic characteristics, acceleration and displacement responses of the three piers were tested and analysed. The results show that all piers are subject to bending damage. The acceleration and displacement responses of the three piers were different but similar in form. At the end of the loading, the external steel plate pier has the highest self-vibration frequency, the highest stiffness and the least damage. The external steel plates strengthen the core concrete restraint of the fabricated piers and improve the overall seismic performance, which is an effective way to improve the seismic performance of the fabricated piers.
文章引用：梁东伟, 王超凡. 外置钢板对套筒连接装配式桥墩抗震性能影响的试验研究[J]. 土木工程, 2022, 11(6): 788-796. https://doi.org/10.12677/HJCE.2022.116085

参考文献

[1] 艾庆华, 王东升, 李宏男, 孟庆利. 钢筋混凝土桥墩地震破坏振动台试验研究[J]. 大连理工大学学报, 2008(5): 733-739.
[2] 葛继平, 王志强. 干接缝节段拼装桥墩振动台试验研究[J]. 工程力学, 2011, 28(9): 122-128.
[3] Liu, Y., Li, X., Zheng, X., et al. (2020) Experimental Study on Seismic Response of Precast Bridge Piers with Double-Grouted Sleeve Connections. Engineering Structures, 221, Article ID: 111023.
[4] 武溢. 装配式桥墩在桥梁施工中的应用[J]. 山西建筑, 2019, 45(16): 123-124.
[Google Scholar] [CrossRef] 
[5] 欧智菁, 薛文浩, 谢铭勤, 韦建刚. 装配式混凝土桥墩施工技术综述[J]. 中外公路, 2020, 40(1): 96-101.
[Google Scholar] [CrossRef] 
[6] Ameli, M.J. and Pantelides, C.P. (2016) Seismic Analysis of Precast Concrete Bridge Columns Connected with Grouted Splice Sleeve Connectors. Journal of Structural Engineering, 143, Article ID: 101410.
[7] Tazarv, M. and Saiidi, M.S. (2016) Low-Damage Precast Columns for Accelerated Bridge Construction in High Seismic Zones. Journal of Bridge Engineering, Vol. 21.
[8] 魏红一, 肖纬, 王志强, 李田田. 采用套筒连接的预制桥墩抗震性能试验研究[J]. 同济大学学报(自然科学版), 2016, 44(7): 1010-1016.
[9] Navarrete, B.A.O., et al. (2019) Influence of Steel Jacket Thickness on the RC Bridges’ Seismic Vulnerability (English Edition). Journal of Traffic and Transportation Engineering, 123, 236-246.
[10] 吴灿彬, 王城泉, 张大林, 李天祺, 丁杰. 外包钢加固钢筋混凝土柱的数值模拟研究[J]. 江苏建筑, 2017(5): 28-30.
[11] 张敏政. 地震工程的概念和应用[M]. 北京: 地震出版社, 2015.
[12] 黄金帅. 节段拼装混凝土双柱墩抗震性能振动台试验研究[D]: [硕士学位论文]. 福州: 福州大学, 2017.
[13] 张抗, 公茂盛. NExT-ITD方法在振动台模型参数识别中的研究[J]. 低温建筑技术, 2017, 39(8): 24-26+31.
[Google Scholar] [CrossRef] 

为你推荐