大力值液压式力标准机研究现状
Review on Research Progress of High Force Standard Machine
DOI: 10.12677/iae.2025.131010, PDF,    科研立项经费支持
作者: 梁 培, 陈 歆, 黄 杰：中国计量大学光学与电子科技学院，浙江 杭州
关键词: 力学计量；液压式力标准机；大力值计量；Mechanical Measurement； Hydraulic Force Standard Machine； High Force Measurement
摘要: 力学计量是通过科学方法和仪器对物体的力学性质进行测量的过程，依托国家计量装置为基准，对各种场合下的力值及物理量进行测量和标定。液压式力标准机在大力值测量中具有重要应用，但油缸泄露可能导致力值输出波动，从而影响力值输出。从硬件结构优化和控制算法两个方面对大力值液压式力标准机的研究现状进行总结，并对其未来发展进行了展望。
Abstract: Mechanical measurement is the process of measuring the mechanical properties of objects through scientific methods and instruments, relying on national measuring devices as the benchmark, the force value and physical quantity in various occasions are measured and calibrated. The hydraulic force standard machine has an important application in the measurement of the force value, but the leakage of the cylinder may lead to the fluctuation of the force value output, thus affecting the value output. The research status of the hydraulic force standard machine with high force value is summarized from two aspects of hardware structure optimization and control algorithm, and its future development is forecasted.
文章引用：梁培, 陈歆, 黄杰. 大力值液压式力标准机研究现状[J]. 仪器与设备, 2025, 13(1): 66-74. https://doi.org/10.12677/iae.2025.131010

参考文献

[1] Garcia, A., Baldo, C., Fabricio Junior, C., et al. (2011) Enhancement of the Force Measurement Capability at IPT-Modernization of a 5 MN Hydraulic Force Standard Machine.
[2] 唐纯谦. 力值计量标准现状及研究进展[J]. 中国测试, 2009, 35(3): 11-16.
[3] 蔡正平, 施昌彦, 李振民, 等. 20 MN液压式力基准机的特点和应用[J]. 自动化仪表, 1993(10): 17-19+45-46.
[4] 施昌彦, 李振民. 用于20 MN基准测力机的新型静压润滑缸塞系统[J]. 计量学报, 1994(3): 181-187.
[5] 蔡正平. 回顾世界领先水平的“20 MN (2000 tf)标准测力机”研制经过[J]. 中国计量, 2014(2): 56-60.
[6] 徐长举. 1 MN静重式力标准机大型结构件力学性能的分析[D]: [硕士学位论文]. 长春: 吉林大学, 2012.
[7] Cristescu, C., Dumitrescu, C., Radoi, R., et al. (2014) Experimental Research for Measuring Friction Forces from Piston Sealing at the Hydraulic Cylinders. Tribology in Industry, 36, 465.
[8] 王同仁. 日本大型液压式标准测力机[J]. 试验技术与试验机, 1988(1): 23-28+19.
[9] Zang, J. and Shi, C.-Y. (1986) Comparison Measurements between Three Force Standard Machine in China. Acta Metrologica Sinica, 7, 177-181.
[10] Shi, C.Y. and Li, Z.M. (1994) Development of a Non-Rotating Loading Ram Cylinder System Using the Hydrostatic Bearing Technique in a 20 MN Force Standard Machine with Hydraulic Multiplication. Measurement, 14, 169-175. [Google Scholar] [CrossRef] 
[11] Kumme, R. and Koehler, F. (2014) PTB’s 16.5 MN Hydraulic Amplification Machine after Modernization. IMEKO 22nd TC3, 15th TC5 and 3rd TC22 International Conferences, Cape Town, 3-5 February 2014, 136-140.
[12] 胡潇寅, 康张宜, 虞跃凌. 5 MN液压式力标准机的设计与验证[J]. 计量技术, 2017(12): 82-84.
[13] 谭洪辉, 徐立, 陶泽成. 10 MN液压式力标准机研制与建标[J]. 计量学报, 2017, 38(S1): 150-152.
[14] Maldonado, N.I. and Betancur, I.D. (2021) A Proposal of an Evaluation Method for Hydraulic Standard Force Machine. Measurement: Sensors, 18, Article ID: 100319. [Google Scholar] [CrossRef] 
[15] Kolwinski, U. and Hahn, T. (2015) The New GTM 10 MN Hydraulic Force Standard Machine. XXI IMEKO World Congress, Prague, 30 August-4 September 2015, 216-218.
[16] 熊俊, 刘建斌. 500 KN液压式叠加式力标准机的研制[J]. 计测技术, 2014, 34(3): 32-35.
[17] 骆昕, 薛栋, 闫瑞, 等. 一种宽量程叠加式力标准机的设计[J]. 计量技术, 2019(1): 17-19.
[18] 王昱, 胡翔. 力标准机发展综述[J]. 计量与测试技术, 2020, 47(7): 61-63.
[19] 陆军华, 兰诗涛, 王文, 等. 液压式力标准机的自动控制研究[J]. 机床与液压, 2004(5): 80-81.
[20] 虞跃凌, 胡潇寅, 康张宜. 嵌入式系统在液压式力标准机控制系统中的应用[J]. 上海计量测试, 2016, 43(1): 5-7.
[21] 刘付琪, 张达, 宋建华, 等. 基于CNN-BiLSTM的液压系统故障诊断[J]. 计算机与现代化, 2023(9): 10-19.

为你推荐