热探针法测量LDPE粉末有效热导率的研究
Research on the Measurement of the Effective Thermal Conductivity of LDPE Powder by the Hot Needle Probe Method
DOI: 10.12677/app.2025.155051, PDF,    科研立项经费支持
作者: 司证威, 王陈奇, 莫汶蓉：西南科技大学数理学院，四川 绵阳；魏 岚：西南科技大学学生工作处，四川 绵阳
关键词: 热探针法；LDPE粉末；有效热导率；粒径；体积分数；Hot-Probe Method； LDPE Powder； Effective Thermal Conductivity； Particle Size； Volume Fraction
摘要: 本文基于热探针法，通过设计新的测量仪器和算法，研究了粒径为(500 μm, 800 μm)和(800 μm, 1000 μm)的低密度聚乙烯(LDPE)粉末体积分数与导热系数的关系，并与各种理论预测进行了对比。实验表明，在不同体积分数下的LDPE粉末的热导率位于Bruggeman模型与Maxwell-Eucken模型之间，并通过线性拟合对体积分数在(0.35, 0.58)的LDPE粉末的有效热导率进行了拟合。
Abstract: This study investigates the relationship between volume fraction and thermal conductivity of low-density polyethylene (LDPE) powders with particle size ranges of (500~800) μm and (800~1000) μm using an improved thermal probe methodology. A novel measurement apparatus and cor- responding algorithm were developed to enhance measurement accuracy. Experimental results demonstrate that the effective thermal conductivity of LDPE powders at different volume fractions falls within the bounds predicted by the Bruggeman model and Maxwell-Eucken model. Specifically, for powders with volume fractions in the range of [0.35, 0.59], a linear regression model was established to characterize the effective thermal conductivity, showing good agreement with experimental data.
文章引用：司证威, 王陈奇, 莫汶蓉, 魏岚. 热探针法测量LDPE粉末有效热导率的研究[J]. 应用物理, 2025, 15(5): 453-462. https://doi.org/10.12677/app.2025.155051

参考文献

[1] 芮绍辉, 余波. 新型建筑保温隔热材料的研究及应用进展[J]. 合成材料老化与应用, 2025, 54(1): 86-89.
[2] Breitkopf, C. (2024) Theoretical Characterization of Thermal Conductivities for Polymers—A Review. Thermo, 4, 31-47. [Google Scholar] [CrossRef] 
[3] Wang, J., Hu, L., Li, W., Ouyang, Y. and Bai, L. (2022) Development and Perspectives of Thermal Conductive Polymer Composites. Nanomaterials, 12, Article 3574. [Google Scholar] [CrossRef] [PubMed]
[4] Ouyang, Y., Bai, L., Tian, H., Li, X. and Yuan, F. (2022) Recent Progress of Thermal Conductive Ploymer Composites: Al2O3 Fillers, Properties and Applications. Composites Part A: Applied Science and Manufacturing, 152, Article 106685. [Google Scholar] [CrossRef] 
[5] 闫心雨. 八氨丙基POSS改性纳米填料/环氧树脂复合材料的制备及性能研究[D]: [硕士学位论文]. 北京: 北京化工大学, 2024.
[6] 李云强. 高导热超高分子量聚乙烯免拔管材料的制备及其性能研究[D]: [硕士学位论文]. 北京: 中国矿业大学, 2024.
[7] 侯红伟. 基于Al2O3改性的导热环氧树脂复合材料的制备与性能研究[D]: [硕士学位论文]. 杭州: 浙江理工大学, 2023.
[8] 牛凯, 晋华, 张永波, 等. 热探针测定装置参数实验研究[J]. 中国测试, 2016, 42(6): 29-32.
[9] Zhang, H., Zhao, G., Ye, H., Ge, X. and Cheng, S. (2005) An Improved Hot Probe for Measuring Thermal Conductivity of Liquids. Measurement Science and Technology, 16, 1430-1435. [Google Scholar] [CrossRef] 
[10] Chudzik, S., Grys, S. and Minkina, W. (2009). The Application of the Artificial Neural Network and Hot Probe Method in Thermal Parameters Determination of Heat Insulation Materials Part 1—Thermal Model Consideration. 2009 IEEE International Conference on Industrial Technology, Churchill, 10-13 February 2009, 1-6.[CrossRef] 
[11] Pilkington, B., Goodhew, S. and de Wilde, P. (2010) In Situ Thermal Conductivity Measurements of Building Materials with a Thermal Probe. Journal of Testing and Evaluation, 38, 339-346. [Google Scholar] [CrossRef] 
[12] Szymczak-Graczyk, A., Gajewska, G., Laks, I. and Kostrzewski, W. (2022) Influence of Variable Moisture Conditions on the Value of the Thermal Conductivity of Selected Insulation Materials Used in Passive Buildings. Energies, 15, Article 2626. [Google Scholar] [CrossRef] 
[13] Klemens, P. (2013) Thermal Conductivity 14. Springer.
[14] Blackwell, J.H. (1956) The Axial-Flow Error in the Thermal-Conductivity Probe. Canadian Journal of Physics, 34, 412-417. [Google Scholar] [CrossRef] 
[15] Witharamage, C.S., Maddumage, M.M.B.S. and Weragoda, V.S.C. (2018) Determination of Thermal Conductivity of LDPE Using Dual Hot Wire Probe Method. 2018 Moratuwa Engineering Research Conference (MERCon), Moratuwa, 30 May-1 June 2018, 259-263. [Google Scholar] [CrossRef] 
[16] Bioucas, F.E.B., Koller, T.M. and Fröba, A.P. (2024) Thermal Conductivity of Glycerol at Atmospheric Pressure between 268 K and 363 K by Using a Steady-State Parallel-Plate Instrument. International Journal of Thermophysics, 45, Article No. 52. [Google Scholar] [CrossRef] 
[17] Woodside, W. and Messmer, J.H. (1961) Thermal Conductivity of Porous Media. I. Unconsolidated Sands. Journal of Applied Physics, 32, 1688-1699. [Google Scholar] [CrossRef] 
[18] Godbee, H.W. and Ziegler, W.T. (1966) Thermal Conductivities of MgO, Al2O3, and ZrO2 Powders to 850°C. II. Theoretical. Journal of Applied Physics, 37, 56-65. [Google Scholar] [CrossRef] 
[19] Qiu, L., Du, Y., Bai, Y., Feng, Y., Zhang, X., Wu, J., et al. (2021) Experimental Characterization and Model Verification of Thermal Conductivity from Mesoporous to Macroporous SiOC Ceramics. Journal of Thermal Science, 30, 465-476. [Google Scholar] [CrossRef] 
[20] Ordonez-Miranda, J., Ezzahri, Y., Joulain, K., Drevillon, J. and Alvarado-Gil, J.J. (2018) Modeling of the Electrical Conductivity, Thermal Conductivity, and Specific Heat Capacity of VO2. Physical Review B, 98, Article 075144. [Google Scholar] [CrossRef] 

为你推荐