Pt基高熵合金耦合杂化-MXene作为高活性催化剂用于氧还原研究
Pt-Based High Entropy Alloy Couplinghybrid-MXene as High-Activeelectrocatalyst for Oxygen Reduction Reaction
DOI: 10.12677/jocr.2026.142017, PDF,   
作者: 刘昱恒, 党雯迪:兰州交通大学化学与化工学院,甘肃 兰州
关键词: MxenePt基催化剂氧还原反应氧析出反应MXene Pt-Based Catalysts Oxygen Reduction Reaction Oxygen Evolution Reaction
摘要: 高熵合金(HEAs)被认为是开发低Pt含量氧电催化剂的一种有效途径。为此,本文报道了一种以炭黑插层MXene作为杂化载体耦合Pt基五元HEAs的催化剂(PtPdAuNiCu/MC3)。X-射线衍射测试表明,催化剂中的五元高熵合金纳米颗粒为面心立方结构。在三电极体系测试中,表现出优于商业Pt/C的氧还原性能(Eonset = 1.011 V/E1/2 = 0.886 V)和接近RuO2的氧析出性能(Ej=10 = 1.824 V)。本研究可为今后基于MXene的其他电化学催化体系的开发提供有价值的参考。
Abstract: High entropy alloy (HEAs) is considered to be an effective way to develop oxygen electrocatalysts with low Pt content. For this reason, a carbon black intercalated MXene was used as a hybrid support to couple the five-component HEAs (PtPdAuNiCu/MC3) headed by Pt. X-ray diffraction results show that this five-element HEAs nanoparticleshave a face centered cubic structure. In a three-electrode testing system, the oxygen reduction performance (Eonset = 1.011 V/E1/2 = 0.886 V) is better than those of commercial Pt/C and the oxygen evolution performance (Ej=10 = 1.824 V) is close to those of commercial RuO2, respectively. This study would provide a valuable reference for the development of other electrocatalysts based on MXene in the future.
文章引用:刘昱恒, 党雯迪. Pt基高熵合金耦合杂化-MXene作为高活性催化剂用于氧还原研究[J]. 有机化学研究, 2026, 14(2): 179-186. https://doi.org/10.12677/jocr.2026.142017

参考文献

[1] Jaramillo, T.F., Jørgensen, K.P., Bonde, J., Nielsen, J.H., Horch, S. and Chorkendorff, I. (2007) Identification of Active Edge Sites for Electrochemical H2 Evolution from MoS2 Nanocatalysts. Science, 317, 100-102. [Google Scholar] [CrossRef] [PubMed]
[2] Chen, Z., Yu, A., Higgins, D., Li, H., Wang, H. and Chen, Z. (2012) Highly Active and Durable Core-Corona Structured Bifunctional Catalyst for Rechargeable Metal-Air Battery Application. Nano Letters, 12, 1946-1952. [Google Scholar] [CrossRef] [PubMed]
[3] Seh, Z.W., Kibsgaard, J., Dickens, C.F., Chorkendorff, I., Nørskov, J.K. and Jaramillo, T.F. (2017) Combining Theory and Experiment in Electrocatalysis: Insights into Materials Design. Science, 355, eaad4998. [Google Scholar] [CrossRef] [PubMed]
[4] Lee, I.H., Cho, J., Chae, K.H., Cho, M.K., Jung, J., Cho, J., et al. (2018) Polymeric Graphitic Carbon Nitride Nanosheet-Coated Amorphous Carbon Supports for Enhanced Fuel Cell Electrode Performance and Stability. Applied Catalysis B: Environmental, 237, 318-326. [Google Scholar] [CrossRef
[5] Liu, X., Han, J., Deng, J., Imhanria, S., Ren, Z. and Wang, W. (2020) Prussian Blue Analogue Derived Pd-Co Composite Bifunctional Electrocatalyst for Zn-Air Battery. Journal of Alloys and Compounds, 832, Article ID: 154896. [Google Scholar] [CrossRef
[6] Zhao, M., Ren, C.E., Ling, Z., Lukatskaya, M.R., Zhang, C., Van Aken, K.L., et al. (2014) Flexible MXene/Carbon Nanotube Composite Paper with High Volumetric Capacitance. Advanced Materials, 27, 339-345. [Google Scholar] [CrossRef] [PubMed]
[7] He, R., Yang, L., Zhang, Y., Wang, X., Lee, S., Zhang, T., et al. (2023) A CrMnFeCoNi High Entropy Alloy Boosting Oxygen Evolution/Reduction Reactions and Zinc-Air Battery Performance. Energy Storage Materials, 58, 287-298. [Google Scholar] [CrossRef
[8] Ma, S., Li, H., Hu, B., Cheng, X., Fu, Q. and Yu, S. (2017) Synthesis of Low Pt-Based Quaternary Ptpdrute Nanotubes with Optimized Incorporation of Pd for Enhanced Electrocatalytic Activity. Journal of the American Chemical Society, 139, 5890-5895. [Google Scholar] [CrossRef] [PubMed]
[9] Fan, Z., He, H., Yu, J., Wang, J., Yin, L., Cheng, Z., et al. (2020) Binder-Free Ti3C2Tx MXene Doughs with High Redispersibility. ACS Materials Letters, 2, 1598-1605. [Google Scholar] [CrossRef
[10] Melvin, A.A., Illath, K., Das, T., Raja, T., Bhattacharyya, S. and Gopinath, C.S. (2015) M-Au/TIO2 (m = Ag, Pd, and Pt) Nanophotocatalyst for Overall Solar Water Splitting: Role of Interfaces. Nanoscale, 7, 13477-13488. [Google Scholar] [CrossRef] [PubMed]