动态硫化PP/EPDM共混体系固化与结晶动力学研究
Study on Solidification Behavior andCrystallization Kinetics of Dynamically-Vulcanized PP/EPDM Blends
摘要:
通过动态硫化方法制备了聚丙烯/三元乙丙橡胶(PP/EPDM)共混体系,研究了不同橡塑比、SiO2添加量等因素对PP/EPDM共混体系的力学性能、导热及结晶动力学的影响。研究表明,随着EPDM含量增加,共混物冷却速率较纯PP有显著提高;随着EPDM的加入,使得PP半晶时间(t1/2)显著缩短,EPDM在共混体系的冷却结晶过程中对PP具有良好的成核促进作用。
Abstract: The PP/EPDM blends were prepared using dynamical vulcanization. The effects of different plas-tic/rubber ratios, content of SiO2 on the mechanical properties, thermal conductivity as well as crystallization kinetics were intensively investigated. Our findings showed that the cooling rate of the PP/EPDM blends increased with increasing EPDM content. With the addition of EPDM, the crystallization half time (t1/2) was shortened, suggesting that the existence of EPDM phase was fa-vorable to the improvement on PP nucleation during the cooling period from melt state.
参考文献
|
[1]
|
朱德钦, 生瑜, 王剑锋 (2008) PP/EPDM/CaCO3三元复合材料的相结构及力学性能的研究. 高分子学报, 11, 1061-1067.
|
|
[2]
|
李梦婷, 杨斌, 苗继斌 (2013) PP/EPDM共混体系增韧技术研究进展. 工程塑料应用, 6, 107-111.
|
|
[3]
|
石彪, 胡爱红 (2002) EPDM动态流化增韧PP的力学性能研究. 工程塑料应用, 1, 12-13.
|
|
[4]
|
王扬丹, 彭履瑶, 王莹 (2013) 纳米碳酸钙对PP/SEBS结晶和力学性能的影响. 工程塑料应用, 10, 101-104.
|
|
[5]
|
龚维, 李宏, 张纯 (2012) 无机粉体形状对微发泡聚丙烯材料发泡行为的影响. 工程塑料应用, 2, 78-82.
|
|
[6]
|
Gupta, N.K., Nagpal, A.K. and Jain, A.K. (2000) Dynamically vulcanized blends of polypropylene (PP) and ethylene propylene diene (EPDM)—A toughening mechanism. Journal of Polymeric Materials, 17, 393-410.
|
|
[7]
|
李宾, 刘妍, 孙斌 (2009) 聚合物基导热复合材料的性能及导热机理. 化工学报, 10, 2650-2655.
|
|
[8]
|
Yang, B., Xia, R. and Miao, J.-B. (2013) Probing solidification kinetics of high-density polyethylene during injection molding using an in-situ measurement technique. Polymer Testing, 32, 202-208.
|
|
[9]
|
余坚, 何嘉松 (1999) 聚丙烯接枝马来酸酐及其离聚物的非等温结晶动力学. 高分子学报, 5, 513-518.
|