基于高保真虚拟仿真的《PLC控制技术》课程教学改革与实践
Teaching Reform and Practice of the Course “PLC Control Technology” Based on High-Fidelity Virtual Simulation
摘要: 《PLC控制技术》是机电一体化和自动化类专业的一门理论与实践并重、以工程应用能力培养为目标的核心课程。针对传统教学中理论教学抽象、实训资源不足、学生动手机会有限等问题,文章以高保真虚拟仿真技术理念为指导,构建了基于Factory IO高保真虚拟仿真场景与西门子博途(TIA Portal)工程软件相结合的教学模式,阐述了“虚拟仿真场景–工程组态软件–综合设计任务”三位一体的教学设计思路,并结合视觉分拣、两线抢位合并、单回路液位PID、重量分拣、堆垛机等典型工程案例,探讨了高保真虚拟仿真技术在PLC课堂教学、实践训练和工程能力培养中的应用路径。教学实践与课堂观察初步表明,该模式有助于降低设备门槛、为学生提供更多自主调试机会并支持工程思维培养,其教学成效仍需通过后续对照实验与量化评价进一步验证。
Abstract: “PLC Control Technology” is a core course placing equal emphasis on theory and practice and aiming at engineering application ability in mechatronics and automation majors. To address the problems of abstract theoretical teaching, insufficient practical training resources and limited hands-on opportunities for students in traditional teaching, guided by the concept of high-fidelity virtual simulation, this paper constructs a teaching mode combining high-fidelity virtual simulation scenes built with Factory IO with the Siemens TIA Portal engineering software, elaborates the three-in-one teaching design thought of “virtual simulation scene - engineering configuration software - comprehensive design task”, and, combined with typical engineering cases such as visual sorting, two-line priority merge control, single-loop liquid level PID, weight sorting and stacker crane, discusses the application paths of high-fidelity virtual simulation technology in PLC classroom teaching, practical training and engineering ability cultivation. Preliminary teaching practice and classroom observation suggest that this model helps lower the threshold for equipment access, provides students with more opportunities for independent troubleshooting, and supports the development of engineering thinking; however, its pedagogical effectiveness requires further validation through subsequent controlled experiments and quantitative evaluation.
参考文献
|
[1]
|
教育部等九部门关于加快推进教育数字化的意见[EB/OL]. 2025-04-11. http://www.moe.gov.cn/srcsite/A01/s7048/202504/t20250416_1187476.html, 2026-10-10.
|
|
[2]
|
王强, 黄迎辉, 陈章宝, 等. 基于Factory IO与PLC虚拟仿真教学改革与探索[J]. 蚌埠学院学报, 2026, 15(2): 117-121.
|
|
[3]
|
尹斌, 赵涵硕, 任天乐. 基于Factory IO的可编程控制器课程教学研究[J]. 农机使用与维修, 2025(1): 147-150+154.
|
|
[4]
|
王艳平, 冯军磊. Factory IO虚拟仿真在《自动化生产线安装与调试》课程中的应用分析[J]. 中国设备工程, 2025(9): 272-274.
|
|
[5]
|
王苗苗, 蒋燕, 林伊婷, 等. 数字孪生技术在“PLC技术及应用”课程中的应用研究[J]. 安徽电子信息职业技术学院学报, 2024, 23(4): 54-58.
|
|
[6]
|
刘永刚, 姚立权, 朱虹. 数字孪生虚拟仿真在智能制造生产线技术课程中的实践[J]. 科技资讯, 2023, 21(4): 203-207.
|
|
[7]
|
陈东毅, 王武, 林建新, 等. 面向大工程观培养的虚拟仿真类课程实践教学综合改革[J]. 电气电子教学学报, 2025, 47(2): 43-48.
|
|
[8]
|
王子辉, 康敏, 费正顺. 智能制造虚拟仿真实践教学模式构建[J]. 电气电子教学学报, 2023, 45(4): 227-230.
|
|
[9]
|
Negahban, A. (2024) Simulation in Engineering Education: The Transition from Physical Experimentation to Digital Immersive Simulated Environments. SIMULATION, 100, 695-708. https://doi.org/10.1177/00375497241229757
|
|
[10]
|
陶飞, 刘蔚然, 刘检华, 等. 数字孪生及其应用探索[J]. 计算机集成制造系统, 2018, 24(1): 1-18.
|
|
[11]
|
刘大同, 郭凯, 王本宽, 等. 数字孪生技术综述与展望[J]. 仪器仪表学报, 2018, 39(11): 1-10.
|