疏排圆形蜂窝夹芯结构面内等效力学参数的理论研究
Theoretical Study on the Mechanical Parameters of the Equivalent Model of the Circular Honeycomb Sandwich
摘要: 针对疏排圆形胞元蜂窝面内结构，建立了圆形胞元蜂窝结构一种新的等效力学理论模型。通过结构力学等相关理论知识，提出了一种求解结构面内力学参数的新思路，得出该结构面内等效力学参数的理论近似解；并通过Ansys有限元软件对该结构进行建模，并施加适当载荷，计算结构在载荷作用下的形变，进而得到相应的数值模拟仿真结果。理论数值结果与有限元仿真结果表明，该近似等效力学模型具有一定的精度和合理性，可为疏排圆形蜂窝夹芯结构的面内力学特性分析研究提供新的理论分析方法。
Abstract: A new equivalent mechanical model of circular cellular structure was established according to the structure of the thin circular cell. Through the structural mechanics and other related theories, this paper puts forward a new method for solving structural plane mechanical parameters; obtains the equivalent mechanical parameters of the structural plane theory of the approximate solution; through the finite element software Ansys to model the structure, applies the appropriate load; calculates deformation of structure under load, and then gets the corresponding numerical simulation results. The numerical results with the finite element simulation results show that the equivalent mechanical model has the certain accuracy and rationality; we can analyze and provide a new theoretical analysis method for the drainage of mechanical properties of circular honeycomb sandwich structure plane.
文章引用：赵国扬, 吴锦武, 王坤, 李志宽. 疏排圆形蜂窝夹芯结构面内等效力学参数的理论研究[J]. 力学研究, 2017, 6(2): 92-100. https://doi.org/10.12677/IJM.2017.62011

参考文献

[1] 张广平, 戴干策. 复合材料蜂窝夹芯板及其应用[J]. 纤维复合材料, 2000, 17(2): 25-27.
[2] Huang, W.-C. and Ng, C.-F. (1998) Sound Insulation Improvement Using Honeycomb Sandwich Panels. Applied Acoustics, 53, 163.
[3] Rajaram, S., Wang, T.A. and Nutt, S. (2006) Sound Transmission Loss of Honeycomb Sandwich Panels. Noise Control Engineering, 54, 106. [Google Scholar] [CrossRef] 
[4] 徐胜今, 孔宪仁, 王本利, 等. 正交异性蜂窝夹层板动、静力学问题的等效分析方法[J]. 复合材料学报, 2000, 17(3): 92-95
[5] 辛锋先, 张钱城, 卢天健. 轻质夹层材料的制备和振动声学性能[J]. 力学进展, 2010, 40(4): 375-399.
[6] 卢天健, 辛锋先. 轻质板壳结构设计的振动和声学基础[M]. 北京: 科学出版社, 2012.
[7] 任树伟, 辛锋先, 卢天健. 蜂窝层芯夹层板结构振动与传声特性研究[J]. 力学学报, 2013, 45(3): 349-358
[8] 王义柏, 魏智平, 郑辉. 单向加筋双层板隔声性能的有限元分析[J]. 噪声与振动控制, 2014, 34(4): 96-100
[9] 雷明慧, 尹久仁. 蜂窝芯层的等效弹性参数[J]. 力学学报, 1999, 31(1): 113-118
[10] 陈梦成, 陈玳珩. 正六边形蜂窝夹芯层面内等效弹性参数研究[J]. 华东交通大学学报, 2010, 27(5): 1.
[11] 赵金森. 铝蜂窝夹层板的力学性能等效模型研究[D]: [硕士学位论文]. 南京: 南京航空航天大学, 2006.
[12] 李贤冰, 温激鸿, 郁殿龙, 温熙森. 蜂窝夹层板力学等效方法对比研究[C]. 第十九届全国玻璃钢/复合材料学术年会论文集: 2012.
[13] Lin, T.-C., Chen, T.-J. and Huang, J.-S. (2012) In-Plane Elastic Constants and Strengths of Circular Cell Honeycombs. Composites Science and Technology, 72, 1380.
[14] 梁森, 陈花玲, 梁天锡. 圆柱形胞元蜂窝夹芯板梁理论的研究[J]. 复合材料学报, 2005, 22(2): 137-142.
[15] 梁森, 雒磊. 密排圆形胞元蜂窝面内等效弹性参数的模拟仿真[J]. 四川兵工学报, 2013, 34(12): 78-83.

为你推荐