无损检测在增材制造技术中应用的研究进展
Research Progress on Application of NDT in Additive Manufacturing Technique
DOI: 10.12677/APP.2018.82011, PDF,  被引量    国家科技经费支持
作者: 陈建伟, 赵 扬*, 刘 帅, 马 健：齐鲁工业大学(山东省科学院)激光研究所，山东 济南；巨 阳：名古屋大学机械学院，名古屋，日本
关键词: 无损检测；增材制造；残余应力；激光超声；Nondestructive Testing； Additive Manufacturing； Residual Stress； Laser Ultrasonic
摘要: 简要论述了增材制造技术各个工艺阶段可能存在的缺陷类型，在此基础上阐述了增材制造技术对于无损检测的需求，并总结了在增材制造过程中使用的检测技术及其应用现状，强调了应力检测的重要性。最后，针对增材制造技术的需要对无损检测技术进行了展望，并指出激光超声技术在增材制造中具有很大的应用潜力。
Abstract: The types of defects that may exist in the various stages of the additive manufacturing technology (AM) are discussed in this paper, and the requirement of NDT in each stage is put forward. The testing technology and its application status in the AM are summarized, and the importance of stress testing is emphasized. At last, the future of the development of NDT in AM has been prospected, and it is pointed out that the laser ultrasonic technology has great potential in the application of the AM.
文章引用：陈建伟, 赵扬, 巨阳, 刘帅, 马健. 无损检测在增材制造技术中应用的研究进展[J]. 应用物理, 2018, 8(2): 91-99. https://doi.org/10.12677/APP.2018.82011

参考文献

[1] Zhou, J.X., Liu, R.X., Chen, L.L. and Liao, D.M. (2004) Applications of Foundry CAE in Steel Casting. Hot Working Technology, 11, 67-68.
[2] 杨强, 鲁中良, 黄福享, 等. 激光增材制造技术的研究现状及发展趋势[J]. 航空制造技术, 2016(12): 26-31.
[3] Zlenko, M.A., Popovich, A.A. and Mutylina, I.N. (2013) Additive Technologies in Machine Building. Polytechnical University Press, St. Petersburg.
[4] Melchels, F.P.W., Domingos, M.A.N., Klein, T.J., et al. (2012) Additive Manufacturing of Tissues and Organs. Progress in Polymer Science, 37, 1079-1104. [Google Scholar] [CrossRef] 
[5] Buchbinder, D., Schleifenbaum, H., Heidrich, S., et al. (2011) High Power Selective Laser Melting (HP SLM) of Aluminum Parts. Physics Procedia, 12, 271-278. [Google Scholar] [CrossRef] 
[6] Baufeld, B., Vanderbiest, O. and Gault, R. (2010) Additive Manufacturing of Ti-6Al-4V Components by Shaped Metal Deposition: Microstructure and Mechanical Properties. Materials & Design, 31, 106-111. [Google Scholar] [CrossRef] 
[7] Murr, L.E., Martinez, E., Amato, K.N., et al. (2012) Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science. Journal of Materials Research and Technology, 1, 42-54. [Google Scholar] [CrossRef] 
[8] Sufiiarov, V.S., Popovich, A.A., Borisov, E.V. and Polozov, I.A. (2015) Selective Laser Melting of Heat-Resistant Nickel Alloy. Non-Ferrous Metals, 1, 32-35.
[9] Popovich, A., Sufiiarov, V., Borisov, E. and Polozov, I. (2015) Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by SLM. Key Engineering Materials, 651-653, 677-682. [Google Scholar] [CrossRef] 
[10] 张小伟. 增材制造技术在航空发动机领域的应用[J]. 航空动力学报, 2016, 31(1): 10-16.
[11] 陈忠旭, 姚锡禹, 郭亮, 等. 基于激光的金属增材制造技术评述与展望[J]. 机电工程技术, 2017, 46(1): 7-13.
[12] Popovich, A.A., Masaylo, D.V., Sufiiarov, V.S., et al. (2016) A Laser Ultrasonic Technique for Studying the Properties of Products Manufactured by Additive Technologies. Russian Journal of Nondestructive Testing, 52, 303-309. [Google Scholar] [CrossRef] 
[13] Waller, J.M., Saulsberry, R.L., Parker, B.H., et al. (2015) Summary of NDE of Additive Manufacturing Efforts in NASA. Review of Progress in Quantitative Nondestructive Evaluation, 1650, 51-62. [Google Scholar] [CrossRef] 
[14] Everton, S.K., Hirsch, M., Stravroulakis, P., et al. (2016) Review of in Situ Process Monitoring and in Situ Metrology for Metal Additive Manufacturing. Materials & Design, 95, 431-445. [Google Scholar] [CrossRef] 
[15] Everton, S., Dickens, P., Tuck, C. and Dutton, B. (2015) Evaluation of Laser Ultrasonic Testing for Inspection of Metal Additive Manufacturing. In: Laser 3D Manufacturing Ii, International Society for Optics and Photonics, Bellingham, Vol. 9353, 935316.
[16] Harris, I.D. (2012) Additive Manufacturing: A Transformational Advanced Manufacturing Technology. Advanced Materials & Processes, 170, 25-29.
[17] 邹小斌, 尹登科, 谷建军. 关于激光熔覆裂纹问题的研究[J]. 激光杂志, 2010, 31(5): 44-45.
[18] 毛怀东. 激光熔覆层裂纹控制方法与实践[D]: [博士学位论文]. 天津: 天津大学, 2007.
[19] 邵玉呈, 陈长军, 张敏, 等. 关于Deloro40镍基合金粉末激光增材制造成型件裂纹问题研究[J]. 应用激光, 2016, 36(4): 397-402.
[20] Aleshin, N.P., Grigor’Ev, M.V., Shchipakov, N.A., et al. (2016) Using Nondestructive Testing Methods for In-Production Quality Control of Additive Manufactured Parts. Russian Journal of Nondestructive Testing, 52, 532-537. [Google Scholar] [CrossRef] 
[21] Aleshin, N.P., Grigor’Ev, M.V., Shchipakov, N.A., et al. (2016) Applying Nondestructive Testing to Quality Control of Additive Manufactured Parts. Russian Journal of Nondestructive Testing, 52, 600-609. [Google Scholar] [CrossRef] 
[22] 吴海曦. 面向增材制造的声发射监测技术及应用研究[D]. 杭州: 浙江大学, 2017.
[23] 傅洋. 磁粉、渗透检测技术的发展: 庆祝中国机械工程学会无损检测分会成立三十周年[J]. 无损检测, 2008(9): 6-9.
[24] Dinwiddie, R.B. (2013) Thermographic in Situ Process Monitoring of the Electron Beam Melting Technology Used in Additive Manufacturing. SPIE Defense Security & Sensing, 23, 87050K. [Google Scholar] [CrossRef] 
[25] Gatto, M. and Harris, R.A. (2011) Non-Destructive Analysis (NDA) of External and Internal Structures in 3DP. Rapid Prototyping Journal, 17, 128-137. [Google Scholar] [CrossRef] 
[26] Guan, G., Hirsch, M., Lu, Z.H., et al. (2015) Evaluation of Selective Laser Sintering Processes by Optical Coherence Tomography. Materials & Design, 88, 837-846. [Google Scholar] [CrossRef] 
[27] Rudlin, J., Cerniglia, D., Scafidi, M. and Schneider, C. (2014) Inspection of Laser Powder Deposited Layers. The 11th European Conference on Nondestructive Testing, Prague, 6-10 October 2014, 10 p.
[28] Klein, M. and Sears, J. (2004) Laser Ultrasonic Inspection of Laser Cladded 316SS and Ti-6-4. In: International Congress on Applications of Lasers and Electro-Optics, Laser Institute of America, Orlando, 6 p.
[29] Herman, P.R. (2013) Defect Detection in Laser Powder Deposition Components by Laser Thermography and Laser Ultrasonic Inspections. SPIE Lase, 8611, 86111N.
[30] Cerniglia, D. (2013) Laser Ultrasonic Technique for Laser Powder Deposition Inspection. 13th International Symposium on Nondestructive Characterization of Materials, Le Mans, 20-24 May 2013, 8 p.
[31] Zaeh, M.F. and Branner, G. (2010) Investigations on Residual Stress and Deformations in Selective Laser Melting. Production Engineering, 4, 35-45. [Google Scholar] [CrossRef] 
[32] 王庆光. 残余应力检测技术及其应用[J]. 重型机械科技, 2002(4): 39-49.
[33] Hoye, N., Li, H.J., Cuiuri, D. and Paradowska, A. (2014) Measurement of Residual Stresses in Titanium Aerospace Components Formed via Additive Manufacturing. Materials Science Forum, 777, 124-129. [Google Scholar] [CrossRef] 
[34] Zhao, Y., Chen, J.W., Zhang, Z.Z. and Zhu, Y.N. (2015) Nondestructive Evaluation of Residual Stress and TGO by Using Laser Ultrasonic Method. Symposium on Piezoelectricity, Acoustic Waves and Device Applications, Jinan, 30 October-2 November 2015, 411-417.
[35] 凌松. 增材制造技术及其制品的无损检测进展[J]. 无损检测, 2016, 38(6): 60-64.

为你推荐