川西黑牛洞铜矿外围及深部找矿前景分析
Analysis on the Prospect of Ore Prospecting in the Outer and Deep Part of West Sichuan Black Bovine Cave
DOI: 10.12677/AG.2018.83049, PDF,   
作者: 余祥龙, 唐高林*, 杨光源, 王昌南:四川里伍铜业股份有限公司,四川 甘孜;李同柱:中国地质调查局成都地质调查中心,四川 成都
关键词: 黑牛洞铜矿找矿前景里伍江浪穹窿Black Bull Hole Copper Mine Prospecting Prospects Wu Jiang Wave Vault
摘要: 黑牛洞矿山已经正式投产,但其主要矿体还并没有完全圈闭。本文在系统总结前人资料的基础之上,详细论述了里伍富铜矿床的基本地质特征,分析总结其成矿条件,进而分析黑牛洞外围及深部找矿前景,为下一步找矿提出建议。综合已有资料以及该地区近期工作成果,经过分析,认为在黑牛洞矿区西部(3线以西)、黄蕨萁沟以北等外围区域以及现阶段已知矿体深部都有较好找矿前景。
Abstract: The black bull hole mine has been officially put into production, but its main ore bodies are not completely closed. On the basis of the systematic summary of previous data, this article discusses in detail the WuFu copper deposits in the basic geological characteristics, analyzes and sums up the metallogenic conditions, analyzes black cattle hole on the periphery and deep prospecting prospect, and gives suggestions for the next step prospecting. Comprehensive existing data and recent work achievements in the region have been analyzed. It is believed that there is a good prospect for ore prospecting in the western part of the black bovine cave area (west of the third line), the north of the yellow fern, and the deep part of the ore body.
文章引用:余祥龙, 李同柱, 唐高林, 杨光源, 王昌南. 川西黑牛洞铜矿外围及深部找矿前景分析[J]. 地球科学前沿, 2018, 8(3): 463-468. https://doi.org/10.12677/AG.2018.83049

参考文献

[1] Yan, D.P., Zhou, M.F., Song, H.L., et al. (2003) Structural Style and Tectonic Significance of the Jianglang Dome in the Eastern Margin of the Tibetan Plateau, China. Journal of Structural Geology, 25, 765-779. [Google Scholar] [CrossRef
[2] Yan, D.P., Zhou, M.F., Song, H.L., et al. (2003) Tectonic Controls on the Formation of the Liwu Cu-Rich Sulfide Deposit in the Jianglang Dome, SW China. Resource Geology, 53, 89-100. [Google Scholar] [CrossRef
[3] 姚鹏, 汪名杰, 李建忠, 等. 里伍式富铜矿床同位素示踪及其成矿地质意义[J]. 地球学报, 2008, 29(6): 691-696.
[4] 李同柱, 冯孝良, 张惠华, 等. 四川里伍铜矿含矿岩系地球化学特征及成因分析[J]. 地质与勘探, 2010, 46(5): 921-930.
[5] 张惠华, 冯孝良, 唐高林, 等. 四川省九龙县中咀铜矿构造与成矿关系研究[J]. 高校地质学报, 2013, 19(1): 95-108.
[6] 冯孝良, 刘俨松, 张惠华, 等. 四川九龙县里伍铜矿包裹体研究[J]. 沉积与特提斯地质, 2008, 28(2): 1-11.
[7] 马国桃, 汪名杰, 姚鹏, 等. 四川省九龙县黑牛洞富铜矿矿床黑云母40Ar-39Ar测年及其地质意义[J]. 地质学报, 2009, 83(5): 671-679.
[8] 李建忠, 汪名杰, 王发清, 等. 四川省九龙县黑牛洞韧性剪切带型浸染状铜矿石的特征及其矿床学意义[J]. 矿床地质, 2010, 29(5): 853-868.
[9] 李建忠, 刘宇平, 沈战武, 等. 四川省九龙县黑牛洞铜锌矿的矿床地质特征、成因及其成矿时代[J]. 地质学报, 2012, 86(12): 1972-1993.
[10] 傅昭仁, 宋鸿林, 颜丹平. 扬子地台西缘江浪变质核杂岩结构及对成矿的控制[J]. 地质学报, 1997, 71(2): 113-122.
[11] 颜丹平, 宋鸿林, 傅昭仁, 等. 扬子地台西缘变质核杂岩带[M]. 北京: 地质出版社, 1997: 18-78.
[12] Huang, M., Maas, R., Buick, I.S., et al. (2003) Crustal Response to Continental Collisions Between the Tibet, Indian, South China and North China Blocks: Geochronological Constraints from the Songpan-Garze Orogenic Belt, Western China. Journal of Metamorphic Geology, 21, 223-240. [Google Scholar] [CrossRef
[13] 游振东, 程素华, 赖兴运. 四川丹巴穹状变质地体[J]. 地学前缘, 2006, 13(4): 148-159.