无水压裂技术研究进展
The Advancement of Waterless Fracturing Technology
DOI: 10.12677/JOGT.2018.403080, PDF,    科研立项经费支持
作者: 滕 起, 张 杨, 刘军严, 李 伟:中国石油塔里木油田分公司油气工程研究院,新疆 库尔勒;孙一流:油气资源与工程国家重点实验室(中国石油大学(北京)),北京 ;中国石油大学(北京)石油工程学院,北京
关键词: 无水压裂高能气体压裂液态二氧化碳压裂泡沫压裂液化石油气压裂Waterless Fracturing High Energy Gas Fracturing Liquefied CO2 Fracturing Foam Fracturing Liquefied Petroleum Gas Fracturing
摘要: 中国页岩气资源储量巨大,开采页岩气对我国能源战略意义重大。现有开采页岩气的手段主要是水力压裂,对页岩储层污染严重,进而影响着页岩压后的产能。同时,中国内页岩气藏主要分布在偏远的西部地区,水资源匮乏,因此亟待开展无水压裂方面的研究。针对我国页岩气无水压裂方面面临的主要问题,分别调研了高能气体压裂、液态二氧化碳压裂、泡沫压裂和液化石油气压裂4种无水压裂技术,详细对比了4种压裂技术的优缺点和应用情况。通过将现有的无水压裂技术与实际地质、工程现状结合,探索出适合我国页岩气开采的无水压裂技术,加快页岩气商业、高效开采进程。
Abstract: Shale gas was rich in China and its development was of great significance of energy strategy in China. At present, the technologies in shale development was mainly hydraulic fracturing, which was harmful to the shale reservoirs and in turn affected production after fracturing. Meanwhile, the shale gas reservoirs in China were widely distributed in remote west China where lacked water. Therefore, the waterless fracturing technology was urgently needed. In this paper, the four waterless fracturing technologies, including high energy gas fracturing, liquefied CO2 fracturing, foam fracturing and liquefied petroleum gas fracturing, were studied. Besides, the advantages, disadvantages, and the application status of the above 4 technologies were compared. By combining the existing waterless fracturing technology with the actual geology and engineering situation, the waterless fracturing technology suitable for shale gas production in China is explored, which speeds up the commercial and efficient exploitation process of shale gas.
文章引用:滕起, 张杨, 刘军严, 李伟, 孙一流. 无水压裂技术研究进展[J]. 石油天然气学报, 2018, 40(3): 167-172. https://doi.org/10.12677/JOGT.2018.403080

参考文献

[1] 陈勉, 葛洪魁, 赵金洲, 等. 页岩油气高效开发的关键基础理论与挑战[J]. 石油钻探技术, 2015, 43(5): 7-14.
[2] 葛洪魁, 王小琼, 张义. 大幅度降低页岩气开发成本的技术途径[J]. 石油钻探技术, 2013, 41(6): 1-5.
[3] 孙张涛, 吴西顺. 页岩气开采中的水力压裂与无水压裂技术[J]. 国土资源情报, 2014, 34(5): 51-55.
[4] 卢拥军. 压裂液对储层的损害及其保护技术[J]. 钻井液与完井液, 1995, 12(5): 36-43.
[5] 薄其众, 葛刚, 马功联. 高能气体压裂技术与应用[J]. 海洋石油, 2003, 23(3): 69-71.
[6] 石崇兵, 李传乐. 高能气体压裂技术的发展趋势[J]. 西安石油大学学报(自然科学版), 2000, 15(5): 17-20.
[7] 王安仕, 吴晋军. 射孔–高能气体压裂复合技术研究[J]. 西安石油大学学报(自然科学版), 1997, 12(4): 12-18.
[8] 张健, 徐冰, 崔明明. 纯液态二氧化碳压裂技术研究综述[J]. 绿色科技, 2014, 43(4): 200-203.
[9] Lillies, A.T. (1982) Sand Fracturing with Liquid Carbon Dioxide. Annual Technical Meeting, Calgary, 6-9 June 1982.
[10] Bullen, R.S. and Lillies, A.T. (1983) Carbon Dioxide Fracturing Process and Apparatus: US. US4374545.
[11] Yang, S.Y., Zhang, S.G. and Yang, Y.Z. (2017) Simulation of CO2 Storage Capacity of Liquid CO2 Fracturing in Low Permeability Reservoir: A Case Study.
[12] 谭明文, 何兴贵, 张绍彬, 等. 泡沫压裂液研究进展[J]. 钻采工艺, 2008, 31(5): 129-132.
[13] 许卫, 李勇明, 郭建春, 等. 氮气泡沫压裂液体系的研究与应用[J]. 西南石油大学学报(自然科学版), 2002, 24(3): 64-67.
[14] 王志刚, 王树众, 林宗虎, 等. 超临界CO2/胍胶泡沫压裂液流变特性研究[J]. 石油与天然气化工, 2003, 32(1): 42-45.
[15] 李兆敏, 孙茂盛, 仵元兵. 泡沫压裂液在裂缝内的层流流动[J]. 广西大学学报(自然科学版), 2006, 31(3): 212-215.