光电对抗对激光光源的要求
Requirements for Directed Infrared Countermeasures Laser
DOI: 10.12677/APP.2018.87040, PDF,   
作者: 尹 扬*：中国航空工业集团公司第一飞机设计研究院，陕西 西安
关键词: 定向红外对抗系统；铥激光器；光参量振荡器；量子级联激光器；DIRCM； Thulium Laser； OPO； QCLs
摘要: 综述了定向红外对抗系统激光源在中红外波段的性能要求，以及对热寻的导弹机载平台的防护。激光对抗的关键性能特征是“目标上有用的能量”这要求激光器在适当的光谱带以较快的开启时间产生高亮度输出。紧凑型光束定向器的集成对激光输出的光束质量设置了上限。详细设计激光器的关键驱动力是最大限度的提高电光转化的效率，以最大限度减少复杂性和体积，从而最大限度提高可靠性并降低成本。最大限度改进在特定的路线激光器的热管理系统产生的电光转换效率单一问题。
Abstract: Contents of abstract performance requirements for DIRCM laser sources, operating in the mid-IR, providing protection of airborne platforms from heat-seeking missiles are reviewed. The critical performance characteristic for a countermeasures laser is “useful energy on target”, which requires the laser to generate high brightness output in the appropriate spectral bands with rapid turn-on time. Integration with a compact beam director places an upper limit on the beam quality of the laser output. The key driver for the detailed laser design is to maximize the overall wall plug efficiency in order to minimize the complexity and volume, in turn maximizing the reliability and reducing the cost. Particular routes to reduce the thermal management system for the laser produce the single largest improvement in overall wall plug efficiency.
文章引用：尹扬. 光电对抗对激光光源的要求[J]. 应用物理, 2018, 8(7): 318-323. https://doi.org/10.12677/APP.2018.87040

参考文献

[1] Northrop Grumman Corporation Web-site. http://www.es.northropgrumman.com/countermanpads/tested_proven/multi_band.html
[2] Titterton, D.H. (2007) A Con-sideration of the Requirements for Laser Devices Used in Countermeasures Applications. Proc. of SPIE, 6451, 64511Q. [Google Scholar] [CrossRef] 
[3] Sijan, A. (2009) Development of Military Lasers for Optical Countermeasures in the Mid-IR. Proc. of SPIE, 7483, 748304. [Google Scholar] [CrossRef] 
[4] Wu, J., Jiang, S., Luo, T., Geng, J., Peyghambari-an, N. and Barnes, N.P. (2006) Efficient Thulium-Doped 2-μm Germinate Fibre Laser. IEEE Photonics Technology Letters, 18, 334-336. [Google Scholar] [CrossRef] 
[5] Frith, G., Carter, A., Samson, B. and Town, G. (2009) Design Consid-erations for Short-Wavelength Operation of 790-nm-pumped Tm-Doped Fibres. Applied Optics, 48, 5072-5075. [Google Scholar] [CrossRef] 
[6] Moulton, P.F., Rines, G.A., Slobodtchikov, E.V., Wall, K.F., Frith, G., Samson, B. and Carter, A.L.G. (2009) Tm-Doped Fiber Lasers: Fundamentals and Power Scaling. IEEE Journal of Selected Topics in Quantum Electronics, 15, 85-92. [Google Scholar] [CrossRef] 
[7] Fan, T.Y., Huber, G., Byer, R.L. and Mitzscherlich, P. (1988) Spectroscopy and Diode Laser-Pumped Operation of Tm, Ho: YAG. IEEE Journal of Quantum Electronics, 24, 924-933. [Google Scholar] [CrossRef] 
[8] Frith, G., Carter, A., Samson, B., Faroni, J., Farley, K., Tankala, K. and Town, G.E. (2010) Mitigation of Photodegradation in 790-nm-Pumped Tm-Doped Fibres. Proc. of SPIE, 7580, 75800A. [Google Scholar] [CrossRef] 
[9] Lippert, E., Nicolas, S., Arisholm, G., Stenersen, K. and Rustad, G. (2006) Midinfrared Laser Source with High Power and Beam Quality. Applied Optics, 45, 3839-3845. [Google Scholar] [CrossRef] 
[10] Elder, I. (2009) Thulium Fibre Laser Pumped Mid-IR Source. Proc. of SPIE, 7325, 73250I. [Google Scholar] [CrossRef] 

为你推荐