典型机翼的拓扑优化方法研究
Research on Topology Optimization Method for Typical Wings
摘要:
针对机翼的结构设计问题，引入拓扑优化技术在机翼结构最优化设计中，采用变密度方法，建立了“以机翼最小柔度为目标函数，体积减少百分比为约束条件”的数学模型，利用ANSYS软件对某飞机机翼进行静态有限元分析，对不同工况下的机翼结构进行拓扑优化设计。探讨了拓扑优化设计过程中，基本模型建立、优化与非优化区域确定、优化准则选取及优化结果分析与应用等问题。研究结果表明，该结构拓扑优化方法的正确性和有效性，在机翼结构优化设计中具有一定的应用前景。
Abstract:
In order to solve the structural design problem of wing, topological optimization technology is in-troduced in the optimization design of wing structure. By means of variable density method, the mathematical model of “taking the minimum flexibility of the wing as the objective function and the volume reduction percentage as the constraint condition” was established. ANSYS software was used to conduct static finite element analysis of the wing, and the topology optimization design of the wing structure under different working conditions was carried out. The basic model establishment, optimization and non-optimization region determination, optimization criterion selection and optimization result analysis and application are discussed in topology optimization design. The results show that the topology optimization method is correct and effective, and has a certain application prospect in the optimization design of wing structure.
参考文献
|
[1]
|
王健. 具有形状和应力约束的连续体结构拓扑优化及其在框架结构设计中的应用[J]. 工程力学, 2002, 19(4): 99-103.
|
|
[2]
|
罗震. 基于变密度法的连续体结构拓扑优化设计技术研究[D]: [博士学位论文]. 武汉: 华中科技大学, 2005.
|
|
[3]
|
张振伟. 机翼结构选型方法研究[D]: [硕士学位论文]. 南京: 南京航空航天大学, 2011.
|
|
[4]
|
王伟, 赵美英, 常楠. 某型机翼内翼结构几何优化设计[J]. 强度与环境, 2006, 33(3): 56-60.
|
|
[5]
|
陈磊. 基于传力路径的结构布局优化方法研究[D]: [硕士学位论文]. 南京: 南京航空航天大学, 2010.
|
|
[6]
|
徐飞鸿, 荣见华. 多工况下结构拓扑优化设计[J]. 力学与实践, 2016, 26(3): 50-54.
|
|
[7]
|
Bendsoe, M.P. and Kikuchi, N. (1988) Generating Optimal Topologies in Structural Design Using a Homogenization Method. Computational Methods in Applied Mechanics and Engineering, 71, 197-244. [Google Scholar] [CrossRef]
|
|
[8]
|
Xie, Y.M. and Steven, G.P. (1933) A Simple Evolutionary Procedure for Structural Optimization. Computers & Structures, 49, 885-896. [Google Scholar] [CrossRef]
|
|
[9]
|
Sethian, J.A. and Wiegmann, A. (2000) Structural Boundary Design via Level Set and Immersed Interface Methods. Journal of Computational Physics, 163, 489-528. [Google Scholar] [CrossRef]
|
|
[10]
|
Bendsoe, M.P. and Sigmund, O. (1999) Material Interpolations in Topology Optimization. Archive of Applied Mechanics, 69, 635-654. [Google Scholar] [CrossRef]
|
|
[11]
|
Groenwold, A.A. and Etman, L.F.P. (2009) A Simple Heuristic for Gray-Scale Suppression in Optimality Criterion-Based Topology Optimization. Structural & Multidisciplinary Optimization, 39, 217-225. [Google Scholar] [CrossRef]
|