泡沫沥青温拌技术在沥青路面SMA-13抗滑磨耗层中的应用研究
Research on Application of Foam Asphalt Warm Mixture in SMA-13 Anti-Sliding Wear Layer
DOI: 10.12677/HJCE.2019.82025, PDF,   
作者: 董 昭, 孙 强:山东省交通科学研究院,山东 济南;闫 晨:山东高速股份有限公司,山东 济南;高荣根:安庆市公路管理局,安徽 安庆
关键词: 泡沫沥青SMA-13沥青混合料体积等效施工温度Foam Asphalt SMA-13 Asphalt Mixtures Volume Equivalent Construction Temperature
摘要: 沥青路面SMA-13采用SBS改性沥青,结合实体工程采用的泡沫沥青温拌技术,对比研究泡沫沥青温拌SMA-13与传统SMA-13的性能。试验结果表明:泡沫沥青温拌SMA-13沥青混合料采用“体积等效”的设计理念,可以实现20℃以上的击实温度降低,经性能验证,泡沫沥青温拌SMA-13沥青混合料飞散性能有所提高,析漏试验结果有所增加,在合适的降温区间内泡沫沥青温拌SMA-13沥青混合料的车辙性能和水稳定性与传统SMA-13沥青混合料无明显差异。
Abstract: Combined with foamed asphalt warm mix technology in physical engineering, the performance of foamed asphalt warm mix SMA-13 and traditional SMA-13 which adopted SBS modified asphalt were compared. The results showed that foamed asphalt warm mix SMA-13 asphalt mixture which adopted the “volume equivalent” design concept can achieve the compaction temperature reduc-tion above 20˚C. It’s verified in performance test that flying performance of foamed asphalt warm mix SMA-13 asphalt mixture was increased, the result of leak test was increased, and the rutting performance and water stability which adopted foamed asphalt warm mix SMA-13 were not sig-nificantly different from that of the traditional SMA-13 asphalt mixture within the appropriate cooling range.
文章引用:董昭, 闫晨, 高荣根, 孙强. 泡沫沥青温拌技术在沥青路面SMA-13抗滑磨耗层中的应用研究[J]. 土木工程, 2019, 8(2): 194-204. https://doi.org/10.12677/HJCE.2019.82025

参考文献

[1] 朱沅峰, 吴超凡, 张继森. 3种添加剂温拌沥青混合料使用性能比较[J]. 公路, 2011(7): 201-206.
[2] 尹应梅, 张荣辉. Evotherm温拌SBR改性沥青高温性能研究[J]. 公路工程, 2010, 35(4): 30-44.
[3] 纪小平, 孙云龙. Sasobit温拌沥青混合料的试验研究[J]. 武汉理工大学学报, 2010, 32(14): 75-78.
[4] 王春. 隧道温拌阻燃沥青混合料技术性能研究[D]: [硕士学位论文]. 西安: 长安大学, 2007.
[5] 罗亮, 苏磊. 高速公路温拌SMA沥青混合料应用技术研究[J]. 建筑工程技术与设计, 2018, 22(8): 514.
[6] 刘薇, 张捷, 林柯, 吴昱. 温拌沥青混合料SMA-13路用性能研究[J]. 筑路机械与施工机械化, 2011, 28(1): 63-65 + 69.