定日镜传动系统的动态传动精度分析
Analysis of Dynamic Transmission Accuracy for Heliostat Transmission System
DOI: 10.12677/MET.2012.13005, PDF,    国家自然科学基金支持
作者: 李文兵, 陈小安*, 王朝兵:重庆大学机械传动国家重点实验室
关键词: 定日镜传动系统传动误差回差主动控制Heliostat Transmission System; Transmission Error; Return Error; Active Control
摘要: 定日镜传动系统主要应用于聚光型太阳能热发电系统,通过对其转动机构的控制,为聚光型太阳能热发电系统提供精确的位置信号。因此,系统的传动精度将直接影响太阳能热发电系统的聚光效率。本文基于统计计算的方法,计算了定日镜传动系统的传动精度;同时通过实验验证的方式,获得传动误差和回差曲线,并对比分析了系统在加载和空载两种状态下的传动精度,最后总结了影响系统传动精度的主要因素,为深入研究精密齿轮传动系统的动态传动精度,探索齿轮传动精度主动控制提供了有效的方法。
Abstract: The heliostat transmission system is mainly used in concentrating solar power system, and it provides accurate position signal for solar power system through the control of its transmission mechanism. Therefore, the transmission accuracy of the system will directly affect the concentration efficiency of solar power system. Based on statistical calculations, the transmission accuracy is calculated. The transmission error and return error curve is got from the experimental results. The transmission accuracy is analyzed and compared under load and no-load states. The main factors that influence the transmission accuracy of the system have been summarized. The research on transmission accuracy will provide an effective method both for the transmission accuracy of active control and the further research of gear transmission accuracy.
文章引用:李文兵, 陈小安, 王朝兵. 定日镜传动系统的动态传动精度分析[J]. 机械工程与技术, 2012, 1(3): 24-29. http://dx.doi.org/10.12677/MET.2012.13005

参考文献

[1] D. C. H. Yang, J. G. Blanche. Design and application guidelines for cycloid drives with machining tolerances. Mechanism and Machine Theory, 1990, 25(5): 487-501.
[2] J. G. Blanche, D. C. H. Yang. Transactions of the American Society of Mechanical Engineers, Jour-nal of Mechanisms, Transmissions, Automation in Design, 1989: 111.
[3] 日高照晃, 王宏猷, 石田武. ほか.サイクロイド齒車を用ぃたK-H-V形遊星齒車装置の回转传达误差に开する研究(第1报,解析方法)[A]. 日本耭械学会论文集(C编)[C]. 1994, 60(570): 645-653.
[4] 石田武, 王宏猷, 日高照晃. ほか.サイクロイド齒車を用ぃたK-H-V形遊星齒車装置の回转传达误差に开する研究(第2报, 各种加工误差、组立误差が回转传达误差に及ほす58影响)[A]. 日本耭械学会论文集(C编)[C]. 1994, 60(578): 3510-3517.
[5] 高大启, 秦树人. 高速小型传动链动态精度测量系统的研究[J]. 重庆大学学报, 1994, 17(4): 1-5.
[6] 高大启, 秦树人. 光栅式小型传动链动态精度测量仪的精度分析[J]. 重庆大学学报, 1994, 17(6): 1-7.
[7] 毛英泰. 误差理论与精度分析[M]. 北京: 国防工业出版社, 1982.