X射线波带片的应用及制备
The Application and Fabrication of X-Ray Zone Plate
DOI: 10.12677/NAT.2019.92005, PDF,    国家科技经费支持
作者: 李艳丽*, 孔祥东, 门 勇, 韩 立:中国科学院电工研究所,微纳加工与智能电气设备研究部,北京;中国科学院大学,北京;陈代谢:中国科学院财务与条件保障局,北京
关键词: X射线聚焦成像波带片切片法X-Ray Focus Imaging Fresnel Zone Plate Slicing
摘要: 随着新一代同步辐射大科学装置的出现,获得高品质X射线光源成为可能,X射线显微成像技术广泛应用于材料科学、生命科学、环境科学等领域。波带片作为X射线显微成像系统中聚焦与成像的核心元件,其制备和性能提高方法越来越受到研究人员的关注。本文介绍了波带片的基本概念、主要类型和应用领域,在此基础上综述了国内外在波带片制备方面的研究现状和最新进展,在总结波带片技术瓶颈的基础上,指出了利用多层薄膜切片法是制备硬X射线波带片的理想方法,我国亟待开展相关研究。
Abstract: With the emergence of a new generation of synchrotron radiation science devices, it is possible to obtain high-quality X-ray light sources. X-ray microscopic imaging technology is widely used in material science, life science, environmental science and other fields. As the core element of fo-cusing and imaging in X-ray microscopic imaging system, Fresnel Zone Plate (FZP) has attracted more and more attention in the methods of preparation and performance improvement. In this paper, the basic concepts, main types and application fields of FZP are introduced. Based on these, the current research and progress in the fabrication of FZP at home and abroad are reviewed. Fi-nally, the bottleneck of the development of FZP is summarized. It is pointed out that the multilay-er-film-slicing method is ideal for the preparation of hard X-ray FZP. And the relevant research is urgently carried out in our country.
文章引用:李艳丽, 陈代谢, 孔祥东, 门勇, 韩立. X射线波带片的应用及制备[J]. 纳米技术, 2019, 9(2): 41-54. https://doi.org/10.12677/NAT.2019.92005

参考文献

[1] 陈洁. 高分辨率X射线成像技术与应用研究[D]: [博士学位论文]. 合肥:中国科学技术大学, 2010.
[2] 徐向东, 洪义麟, 付绍军, 等. X射线波带片的制作及其应用[J]. 光学技术, 1999(2): 22-25.
[3] 陈宜方. X射线衍射光学部件的制备及其光学性能表征[J]. 光学精密工程, 2017, 25(11): 2779-2798.
[4] 肖凯. 软X射线聚焦波带片研究[D]: [博士学位论文]. 合肥:中国科学技术大学, 2006.
[5] 陈建. 同步辐射X射线显微成像的新方法和新技术[D]: [博士学位论文]. 合肥:中国科学技术大学, 2015.
[6] Van der Laan, G. (2017) Time-Resolved X-Ray Detected Ferromagnetic Resonance of Spin Currents. Journal of Electron Spectroscopy and Related Phenomena, 220, 137-146. [Google Scholar] [CrossRef
[7] Fischer, P., Im, M.-Y., Baldasseroni, C., et al. (2013) Magnetic Imaging with Full-Field Soft X-Ray Microscopies. Journal of Electron Spectroscopy and Related Phenomena, 189, 196-205, [Google Scholar] [CrossRef
[8] Buonassisi, T., Istratov, A.A., Heuer, M., et al. (2005) Synchro-tron-Based Investigations of the Nature and Impact of Iron Contamination in Multicrystalline Silicon Solar Cells. Journal of Applied Physics, 97, Article ID: 074901. [Google Scholar] [CrossRef
[9] Buonassisi, T., Istratov, A.A., Marcus, M.A., et al. (2005) Engineering Met-al-Impurity Nanodefects for Low-Cost Solar Cells. Nature Materials, 4, 676-679. [Google Scholar] [CrossRef] [PubMed]
[10] 陈直. 硬X射线折射透镜的纳米聚焦特性研究[D]: [博士学位论文]. 上海: 中国科学院大学, 2015.
[11] Weiss, D., Schneider, G., Niemann, B., et al. (2000) Computed Tomography of Cryogenic Biological Specimens Based on X-Ray Microscopic Images. Ultramicroscopy, 84, 185-197. [Google Scholar] [CrossRef] [PubMed]
[12] Zhu, Y., Zhang, J.C., Li, A., et al. (2017) Synchrotron-Based X-Ray Microscopy for Sub-100nm Resolution Cell Imaging. Current Opinion in Chemical Biology, 39, 11-16. [Google Scholar] [CrossRef] [PubMed]
[13] Chien, C.C., Tseng, P.Y. Chen, H.H., et al. (2013) Imaging Cells and Sub-Cellular Structures with Ultrahigh Resolution Full-Field X-Ray Microscopy. Biotechnology Advances, 31, 375-386. [Google Scholar] [CrossRef] [PubMed]
[14] Schneider, G., Guttmann, P., Heim, S., et al. (2010) Three-Dimensional Cellular Ultrastructure Resolved by X-Ray Microscopy. Nature Methods, 7, 985-987.
[15] Erdem, S., Gürbüz, E. and Uysal, M. (2018) Micro-Mechanical Analysis and X-Ray Computed Tomography Quantification of Damage in Concrete with Industrial By-Products and Construction Waste. Journal of Cleaner Production, 189, 933-940. [Google Scholar] [CrossRef
[16] Elinwa, A.U. and Umar, M. (2017) X-Ray Diffraction and Micro-structure Studies of Gum Arabic-Cement Concrete. Construction and Building Materials, 156, 632-638. [Google Scholar] [CrossRef
[17] Dalipi, R., Borgese, L., Tsuji, K., Bontempi, E. and Depero, L.E. (2018) Elemental Analysis of Teas, Herbs and Their Infusions by Means of Total Reflection X-Ray Fluorescence. Journal of Food Composition and Analysis, 67, 128-134. [Google Scholar] [CrossRef
[18] Tolrà, R., Vogel-Mikuš, K., Hajiboland, R., et al. (2011) Localization of Aluminum in Tea (Camellia Sinensis) Leaves Using Low Energy X-Ray Fluorescence Spectro-Microscopy. Journal of Plant Research, 124, Article ID: 165172. [Google Scholar] [CrossRef] [PubMed]
[19] Bernard, S., Benzerara, K., Beyssac, O., et al. (2009) Ultrastructural and Chemical Study of Modern and Fossil Sporoderms by Scanning Transmission X-Ray Microscopy (STXM). Review of Palaeo-botany and Palynology, 156, 248-261. [Google Scholar] [CrossRef
[20] Xue, C.F., Zhao, J., Wu, Y.Q., et al. (2017) Fabrication of Large-Area High-Aspect-Ratio Periodic Nanostructures on Various Substrates by Soft X-Ray Interference Lithography. Applied Surface Science, 425, 553-557. [Google Scholar] [CrossRef
[21] Schmahl, G. and Rudolph, D. (1984) X-Ray Microcopy. Springer Verlag, Berlin.
[22] 付绍军, 洪义麟, 陶晓明, 等. 软X射线聚焦波带片制备工艺的研究[J]. 光学学报, 1995, 15(8): 1148-1150.
[23] Sarkar, S.S., Solak, H.H., Raabe, J., et al. (2010) Fabrication of Fresnel Zone Plates with 25 nm Zone Width Using Extreme Ultraviolet Holography. Microelectronic Engineering, 87, 854-858. [Google Scholar] [CrossRef
[24] Michette, A.G. and Morrison, G.R. (1992) X-Ray Microscopy III: Pro-ceedings. Springer Verlag, Berlin.
[25] Li, M.T., Wang, J., Zhuang, L. and Chou, S.Y. (2000) Fabrication of Circular Optical Struc-tures with a 20 nm Minimum Feature Size Using Nanoimprint Lithography. Applied Physics Letters, 76, 673-675. [Google Scholar] [CrossRef
[26] 张斌智. 波带片的设计及其衍射特性研究[D]: [博士学位论文]. 杭州: 浙江大学, 2010.
[27] Gorelick, S., Vila-Comamala, J., Guzenko, V.A., et al. (2011) High-Efficiency Fresnel Zone Plates for Hard X-Rays by 100 keV E-Beam Lithography and Electroplating. Journal of Synchrotron Radiation, 18, 442-446. [Google Scholar] [CrossRef] [PubMed]
[28] Chen, Y.T., Lo, T.N., Chiu, C.W., et al. (2008) Fabrication of High-Aspect-Ratio Fresnel Zone Plates by E-Beam Lithography and Electroplating. Journal of Synchrotron Radiation, 15, 170-175. [Google Scholar] [CrossRef] [PubMed]
[29] Liu, L., Liu, G., Xiong, Y., et al. (2008) Fabrication of Fresnel Zone Plates with High Aspect Ratio by Soft X-Ray Lithography. Microsystem Technologies, 14, 1251-1255. [Google Scholar] [CrossRef
[30] Divan, R., Mancini, D.C., Moldovan, N.A., et al. (2002) Progress in the Fabrication of High-Aspect-Ratio Zone Plates by Soft X-Ray Lithography. Proceedings of SPIE, 4783, 82-91. [Google Scholar] [CrossRef
[31] Cao, L., Xie, C. and Liu, M. (2006) Microzone Plates with High-Aspect Ratio Fabricated by E-Beam and X-Ray Lithography. Journal of Microlithography Microfabrication & Microsystems, 5, 145-150.
[32] 王德强, 曹磊峰, 谢常青, 等. 电子束和X射线光刻制作高分辨率微波带片[J]. 半导体学报, 2006, 27(6): 1147-1150.
[33] Gleber, S.-C., Wojcik, M., Liu, J., et al. (2014) Fresnel Zone Plate Stacking in the Intermediate Field for High Efficiency Focusing in the Hard X-Ray Regime. Optics Express, 22, 28142-28153. [Google Scholar] [CrossRef] [PubMed]
[34] Gorelick, S., Guzenko, V.A., Vila-Comamala, J., et al. (2010) Direct E-Beam Writing of Dense and High Aspect Ratio Nanostructures in Thick Layers of PMMA for Electroplating. Nanotechnology, 21, Article ID: 295303. [Google Scholar] [CrossRef] [PubMed]
[35] Mohacsi, I., Karvinen, P., Vartiainen, I., et al. (2014) High-Efficiency Zone-Plate Optics for Multi-keV X-Ray Focusing. Journal of Synchrotron Radiation, 21, 497-501. [Google Scholar] [CrossRef] [PubMed]
[36] Chao, W., Harteneck, B.D., Liddle, J.A., et al. (2005) Soft X-Ray Microscopy at a Spatial Resolution Better than 15 nm. Nature, 435, 1210-1213. [Google Scholar] [CrossRef] [PubMed]
[37] Chao, W., Kim, J., Rekawa, S., et al. (2009) Demonstration of 12 nm Resolu-tion Fresnel Zone Plate Lens Based Soft X-Ray Microscopy. Optics Express, 17, 17669-17677. [Google Scholar] [CrossRef] [PubMed]
[38] Uhlen, F., Lindqvist, S., Nilsson, D., et al. (2011) New Diamond Nanofabrication Process for Hard X-Ray Zone Plates. Journal of Vacuum Science & Technology B, 29, Article ID: 06FG031. [Google Scholar] [CrossRef
[39] Tamura, S., Ohtani, K., Kamijo, N., et al. (1996) Influence of Deposition Para-meters on Layer Structure of Ag/C Multilayer Zone Plates for Use in Hard X-Ray Region. Thin Solid Films, 281-282, 243-245. [Google Scholar] [CrossRef
[40] Tamura, S., Murai, K., Kamijo, N., et al. (2000) Focusing Effcien-cy of a Multilayer Fresnel Zone Plate for Hard X-Ray Fabricated by DC Sputtering Deposition. Vacuum, 59, 553-558. [Google Scholar] [CrossRef
[41] Kamijo, N., Suzuki, Y., Takano, H., et al. (2003) Microbeam of 100 keV X Ray with a Sputtered-Sliced Fresnel Zone Plate. Review of Scientific Instruments, 74, 5101-5104. [Google Scholar] [CrossRef
[42] Mayer, M., Keskinbora, K., Grevent, C., et al. (2013) Efficient Focusing of 8 keV X-Rays with Multilayer Fresnel Zone Plates Fabricated by Atomic Layer Deposition and Focused Ion Beam Milling. Journal of Synchrotron Radiation, 20, 433-440. [Google Scholar] [CrossRef] [PubMed]
[43] Mayer, M., Grevent, C., Szeg-halmi, A., et al. (2011) Multilayer Fresnel Zone Plate for Soft X-Ray Microscopy Resolves Sub-39 nm Structures. Ultramicroscopy, 111, 1706-1711. [Google Scholar] [CrossRef] [PubMed]
[44] Sanli, U.T., Jiao, C.G., Baluktsian, M., et al. (2018,) 3D Nanofabrication of High-Resolution Multilayer Fresnel Zone Plates. Advanced Science, 5, Article ID: 1800346. [Google Scholar] [CrossRef] [PubMed]
[45] Eberl, C., Döring, F., Liese, T., et al. (2014) Fabrication of Laser Deposited High-Quality Multilayer Zone Plates Forhard X-Ray Nanofocusing. Applied Surface Science, 307, 638-644. [Google Scholar] [CrossRef
[46] Yasumoto, M., Tamura, S., Kamijo, N., et al. (2012) Microstructure of Multilayer Fresnel Zone Plate for X-Ray Focusing. Physics Procedia, 32, 157-160. [Google Scholar] [CrossRef
[47] Tamura, S., Yasumoto, M., Kamijo, N., et al. (2006) New Approaches to Fabrication of Multilayer Fresnel Zone Plate for High-Energy Synchrotron Radiation X-Rays. Vacuum, 80, 823-827. [Google Scholar] [CrossRef
[48] Tamura, S., Yasumoto, M., Kamijo, N., et al. (2009) Multilevel-Type Multilayer X-Ray Lens (Fresnel Zone Plate) by Sputter Deposition. Vacuum, 83, 691-694. [Google Scholar] [CrossRef
[49] Tamura, S., Yasumoto, M., Kamijo, N., et al. (2010) Quasi-Blazed Type Multilayer Zone Plate for X-Rays. Vacuum, 84, 578-580. [Google Scholar] [CrossRef