CC5083冷轧板电阻炉快速加热再结晶退火得等轴晶
Gain Equiaxed Gains through Rapid Heating in Resistance Furnace for Cold-Rolled Cc5083 Aluminum Alloy
摘要: CC5083铝合金冷轧板经过电阻炉常规再结晶退火后组织晶粒粗长而影响性能。采用发明工艺电阻炉到温入炉快速加热1 h再结晶退火试样，经偏光金相观察获得的组织晶粒呈等轴、细小，此等轴、细小晶粒组织对性能有利；利用电子背散射技术观察再结晶晶界及晶内分布细小、弥散第二相，经X-射线衍射检测第二相为Mg5Al8。获得等轴、细小再结晶晶粒的机理是到温入炉快速加热再结晶退火时形核率高，再结晶晶界上弥散分布的细小第二相Mg5Al8颗粒阻止再结晶晶粒长大；铝合金基体中保持细小弥散的第二相有利于获得等轴细小再结晶晶粒。电阻炉到温入炉快速加热再结晶退火工艺适于CC5083铝合金冷轧板工业应用。
Abstract: The grain shape of CC5083 aluminium alloy cold rolled plate is long and large after conventional re-crystallization annealing in resistance furnace and has bad performance. After the samples are re-crystallized annealing (use the invention processes), namely, when the temperature of furnace is up to the recrystallization temperature of the samples, the samples are put into resistance furnace and the temperature of furnace was quickly up to the recrystallization temperature of samples and held 1 h. Polarization metallographic microscopy showed that the grain size of the sample was equiaxed and fine. Fine dispersed precipitated phase particles were observed in the basal phase grain bound-aries under EBSD and the precipitation phase was Mg5Al8 according to the XRD. The mechanism of fine equiaxial grains gained is that: the recrystallization nucleation rate is high when the furnace is rapidly heated to the recrystallization temperature of the samples, and the samples are put into furnace and the temperature of furnace is quick to recrystallization temperature and holds for an-nealing. The fine second phase Mg5Al8 particles dispersed on the recrystallized grain boundaries prevent recrystallized grain growth; maintaining a finely dispersed second phase in the aluminum alloy matrix is advantageous for obtaining equiaxed fine recrystallized grains. The annealing pro-cess is suitable for industrial application of CC5083 aluminum alloy cold rolled sheet.
文章引用：陈明彪, 韦琪, 马晓艺, 张林慧, 隋箐箐, 杨翰, 杨家豪, 扎西卓玛, 贾富华. CC5083冷轧板电阻炉快速加热再结晶退火得等轴晶[J]. 材料科学, 2019, 9(5): 458-465. https://doi.org/10.12677/MS.2019.95058

参考文献

[1] 陈明彪. 铝合金轧制与多向限制变形微结构和织构研究[D]: [博士学位论文]. 燕山: 燕山大学, 2013: 22.
[2] Xia, S.L., Ma, M., Zhang, J.X., Wang, W.X. and Liu, W.C. (2014) Effect of Heating Rate on the Microstruc-ture, Texture and Tensile Properties of Continuous Cast AA 5083 Aluminum Alloy. Materials Science & Engineering A, 609, 168-176. [Google Scholar] [CrossRef] 
[3] 陈明彪, 李永伟, 谭元标, 马旻, 王学敏, 刘文昌. CC5083与CC5182铝合金冷轧与再结晶后偏光金相观察组织和X-射线检测织构对比研究[J]. 光谱学与光谱分析, 2015, 35(2): 814-819.
[4] 陈明彪, 马晓艺, 金陪鹏, 等. CC5083铝合金冷轧板箱式炉再结晶退火获等轴晶的方法[P]. 中国发明专利，ZL 201610293084 .1, 2018-12-28.
[5] Liu, W.C., Zhai, T. and Morris, J.G. (2003) Comparison of Recrystallization and Recrystallization Textures in Cold Rolled DC and CC AA 5182 Aluminum Alloys. Materials Science and Engineering A, 358, 84-93. [Google Scholar] [CrossRef] 
[6] Thompson, M. (2000) Effects of Laboratory Rolling Condi-tions on Continuously Cast AA 5083. United States Naval Academy, United States Navy B.S., 1-20.
[7] Liu, W.C., Li, Z., Man, C.-S., et al. (2006) Effect of Precipitation on Rolling Texture Evolution in Continuous Cast AA 3105 Aluminum Alloy. Materials Science and Engineering A, 434, 105-113. [Google Scholar] [CrossRef] 
[8] Engler, O. (1999) On the Origin of the R Orientation in the Re-crystallization Textures of Aluminum Alloys. Metallurgical and Materials Transactions A, 30, 1517-1527. [Google Scholar] [CrossRef] 
[9] Liu, W.C. and Morris, J.G. (2005) Evolution of Recrystallization and Recrystallization Texture in Continuous-Cast AA 3015 Aluminum Alloy. Metallurgical and Materials Transactions A, 36, 2829-2848. [Google Scholar] [CrossRef] 
[10] 黄元春, 许天成, 肖政兵, 任贤魏, 贾广泽. 弥散相对3003铝合金再结晶晶粒尺寸的影响[J]. 材料工程, 2018, 46(6): 65-72.
[11] 张新明, 吴文祥, 唐建国, 李慧中, 周卓平. 预析出对冷轧3003铝合金析出行为及再结晶晶粒尺寸的影响[J]. 中南大学学报(自然科学版), 2006(4): 212-216.
[12] 张德芬. 3104铝合金形变与再结晶过程中织构及显微组织的研究[D]: [博士学位论文]. 沈阳: 东北大学, 2004: 116.

为你推荐