基于交错Buck电路的车载充电机控制系统研究
Control System Research on On-Board Battery Charger Based on Interleaved Buck Circuit
DOI: 10.12677/JEE.2019.72016, PDF,   
作者: 王成波：新誉庞巴迪牵引系统有限公司，工程部，江苏 常州
关键词: 交错Buck；充电机；PSIM；控制策略；仿真模型；Interleaved Buck； Battery Charger； PSIM； Control Strategy； Simulation Mode
摘要: 基于北京平谷线地铁车辆的需求，开发了一款基于交错Buck电路的车载充电机用于蓄电池充电和为负载提供辅助电源，文中提出了车载充电机的硬件系统，分析了车载充电机的基本工作原理，提出了该变换器的数字控制策略，在此基础上建立了PSIM的仿真模型，最后通过实验验证了所提出控制系策略的正确性和合理性。
Abstract: According to the needs of Beijing Pinggu Line subway vehicles, an on-board charger based on an interleaved Buck circuit is developed for battery charging and auxiliary power for the load. The hardware system of the on-board battery charger is proposed in the paper, the basic working principle of the on-board battery charger is analyzed, digital control strategy of the converter is proposed on these bases, and then PSIM simulation mode is constructed. Finally, the validity and reliability of the control system are verified by experiment.
文章引用：王成波. 基于交错Buck电路的车载充电机控制系统研究[J]. 电气工程, 2019, 7(2): 130-135. https://doi.org/10.12677/JEE.2019.72016

参考文献

[1] Renes Pinheiro, J. and Barbi, I. (1992) The Three Level ZVS PWM Converter: A New Concept in High Voltage Dc-to-Dc Conversion. Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Au-tomation, San Diego, CA, 13-13 November 1992, 173-178.
[2] 李斌. 三电平变换器的研究[D]: [硕士学位论文]. 南京: 南京航空航天大学, 2002.
[3] 薛雅丽, 阮新波. 输入/输出共地的BUCK三电平变换器[J]. 南京航空航天大学学报, 2004, 36(3): 364-368.
[4] Fang, Z.P., Zhang, F. and Qian, Z.M. (2003) A Magreticless DC-DC Converter for Dual-Voltage Automotive System. IEEE Transactions on Industry Applications, 39, 511-518. [Google Scholar] [CrossRef]