石墨烯增强铝基复合材料的研究进展
Research Progress on Graphene Reinforced Aluminum-Based Composites
DOI: 10.12677/MS.2019.98100, PDF,    科研立项经费支持
作者: 李江宇*：广西柳州银海铝业股份有限公司，广西 柳州；赵寿荣, 邓运来, 姜科达：中南大学轻合金研究院，湖南 长沙；张 伟：广西柳州银海铝业股份有限公司，广西 柳州；中南大学轻合金研究院，湖南 长沙
关键词: 石墨烯；铝基复合材料；制备；性能；Grapheme； Aluminum-Based Composites； Manufacturing Methods； Properties
摘要: 石墨烯具有优异的力学性能、高导热系数和低密度，被公认为金属基复合材料(MMC)的理想增强材料。本文综述了石墨烯增强铝基复合材料的制备方法，归纳了粉末冶金法、搅拌鋳造法及其他多种方法的研究现状。重点讨论了不同制备方法对石墨烯增强铝基复合材料组织和性能的影响。并对石墨烯增强铝基复合材料的工业化应用前景作了展望。
Abstract: Graphene possesses excellent mechanical properties, high thermal conductivity and low density. It is recognized as an ideal reinforcing material for metal matrix composites (MMC). In this paper, the preparation methods of graphene reinforced aluminum matrix composites are reviewed, the research status of powder metallurgy, stir casting process and other methods is summarized. Casting process effects of different preparation methods on the microstructure and properties of graphene reinforced aluminum matrix composites were discussed. Its application prospect is also predicted at last.
文章引用：李江宇, 赵寿荣, 张伟, 邓运来, 姜科达. 石墨烯增强铝基复合材料的研究进展[J]. 材料科学, 2019, 9(8): 803-812. https://doi.org/10.12677/MS.2019.98100

参考文献

[1] Novoselov, K.S., Geim, A.K., Morozov, S.V., et al. (2004) Electric Field Effect in Atomically Thin Carbon Films. Science, 306, 666-669. [Google Scholar] [CrossRef] [PubMed]
[2] Choi, D., Kim, Y., Ahn, B., Kim, Y.-I. and Jung, S.-B. (2013) Micro-structure and Mechanical Property of A356 Based Composite by Friction Stir Processing. Transactions of Nonferrous Metals Society of China, 23, 335-340. [Google Scholar] [CrossRef] 
[3] 杨斌, 杜更新, 程福来, 等. 半固态烧结制备石墨烯/7075铝基复合材料与性能研究[J]. 粉末冶金技术, 2018, 36(4): 303-307.
[4] Khan, M., Rehman, A., Aziz, T., et al. (2017) Cold Formability of Friction Stir Processed Aluminum Composites Containing Carbon Nanotubes and Boron Carbide Particles. Ma-terials Science and Engineering: A, 701, 382-388. [Google Scholar] [CrossRef] 
[5] 刘强, 柯黎明, 黄春平, 等. 碳纳米管含量对铝基复合材料力学性能的影响[J]. 材料导报, 2016, 30(20): 67-70.
[6] Khan, M., Rehman, A., Aziz, T., et al. (2018) Effect of Inter-Cavity Spacing in Friction Stir Processed Al5083 Composites Containing Carbon Nanotubes and Boron Carbide Particles. Journal of Materials Processing Technology, 253, 72-85. [Google Scholar] [CrossRef] 
[7] 王雷, 尹华, 徐润, 等. 原位碳纳米管/铝基复合材料的制备与力学性能[J]. 粉末冶金材料科学与工程, 2019, 24(1): 63-67.
[8] Arab, S.M., Karimi, S., Jahromi, S.A.J., Javadpour, S. and MojtabaZebarjad, S. (2015) Fabrication of Novel Fiber Reinforced Aluminum Composites by Friction Stir Processing. Materials Science and Engineering: A, 632, 50-57.
[9] Yan, S.J., Dai, S.L., Zhang, X.Y., et al. (2014) Investigating Aluminum Alloy Reinforced by Graphene Nanoflakes. Materials Science and Engineering: A, 612, 440-444.
[10] 燕绍九, 陈翔, 洪起虎, 等. 石墨烯增强铝基纳米复合材料研究进展[J]. 航空材料学报, 2016, 36(3): 57-70.
[11] Bodenmann, A.K. and Macdonald, A.H. (2007) Graphene: Exploring Carbon Flatland. Physics Today, 60, 35-41. [Google Scholar] [CrossRef] 
[12] Hummers, W.S. and Offeman, R.E. (1958) Preparation of Graphitic Oxide. Journal of the American Chemical Society, 208, 1334-1339. [Google Scholar] [CrossRef] 
[13] Sui, D., Huang, Y., Huang, L., Zhang, Y. and Chen, Y. (2014) Investigation of Gas Storage Properties of Graphene Material Prepared by Microwave-Assisted Reduction of Graphene Oxide. Acta Chimica Sinica, 72, 382-387. [Google Scholar] [CrossRef] 
[14] 邹鹏, 石文荣, 杨书华, 等. 石墨烯的化学气相沉积法制备及其表征[J]. 材料科学与工程学报, 2014, 32(2): 264-267.
[15] 杨柳, 李龙, 周德敬. 石墨烯铝基复合材料的研究进展[J]. 轻合金加工技术, 2017, 45(2): 12-18.
[16] Pérez-Bustamante, R., Bolaños-Morales, D., Bonilla-Martínez, J., Estrada-Guel, I. and Martínez-Sánche, R. (2014) Microstructural and Hardness Behavior of Graphene-Nanoplatelets/Aluminum Composites Synthesized by Mechanical Alloying. Journal of Alloys and Compounds, 615, S578-S582. [Google Scholar] [CrossRef] 
[17] 吴海峰, 李建超, 张学习, 等. 石墨烯/铝复合材料热挤压过程组织演变[J]. 材料热处理学报, 2018, 39(4): 14-19.
[18] Li, G. and Xiong, B. (2017) Effects of Graphene Content on Micro-structures and Tensile Property of Graphene-Nanosheets/Aluminum Composites. Journal of Alloys and Compounds, 697, 31-36. [Google Scholar] [CrossRef] 
[19] Rashad, M., Pan, F., Tang, A. and Asif, M. (2014) Effect of Graphene Na-noplatelets Addition on Mechanical Properties of Pure Aluminum Using a Semi-Powder Method. Progress in Natural Science: Ma-terials International, 24, 101-108. [Google Scholar] [CrossRef] 
[20] 王勇, 周吉学, 程开明. 石墨烯增强铝基复合材料的制备工艺、组织与性能研究进展[J]. 材料导报, 2017, 31(S1): 451-457.
[21] Wu, Y., Zhan, K., Yang, Z., et al. (2019) Graphene Oxide/Al Composites with Enhanced Mechanical Properties Fabricated by Simple Electrostatic Interaction and Powder Metallurgy. Journal of Alloys and Compounds, 775, 233-240. [Google Scholar] [CrossRef] 
[22] Bhanu Prakash, P., Brahma Raju, K., ManiKandan, N. and Venkata Subbaiah, K. (2018) Analysis and Evaluation of Mechanical Properties of Al 7075 GNP’s Composites. Materials Today: Proceedings, 5, 14281-14291. [Google Scholar] [CrossRef] 
[23] 梁建权, 赵宇宏, 陈利文, 等. 石墨烯纳米片增强铝基复合材料的制备及研究[J]. 特种铸造及有色合金, 2019, 39(6): 652-656.
[24] Shao, P., Yang, W., Zhang, Q., et al. (2018) Microstructure and Tensile Properties of 5083 Al Matrix Composites Re-inforced with Graphene Oxide and Graphene Nanoplates Prepared by Pressure Infiltration Method. Composites Part A: Applied Science and Manufacturing, 109, 151-162. [Google Scholar] [CrossRef] 
[25] Yu, Z., Yang, W., Zhou, C., et al. (2019) Effect of Ball Milling Time on Graphene Nanosheets Reinforced Al6063 Composite Fabricated by Pressure Infiltration Method. Carbon, 141, 25-39. [Google Scholar] [CrossRef] 
[26] Yolshina, L.A., Muradymov, R.V., Korsun, I.V., Yakovlev, G.A. and Smirnov, S.V. (2016) Novel Aluminum-Graphene and Aluminum-Graphite Metallic Composite Materials: Synthesis and Properties. Journal of Alloys and Compounds, 663, 449-459. [Google Scholar] [CrossRef] 
[27] Mishra, R.S. and Ma, Z.Y. (2005) Friction Stir Welding and Processing. Materials Science and Engineering: R: Reports, 50, 1-78. [Google Scholar] [CrossRef] 
[28] Devaraju, A., Kumar, A. and Kotiveerachari, B. (2013) Influence of Addition of Grp/Al2O3p with SiCp on Wear Properties of Aluminum Alloy 6061-T6 Hybrid Composites via Friction Stir Processing. Transactions of Nonferrous Metals Society of China, 23, 1275-1280. [Google Scholar] [CrossRef] 
[29] 刘守法, 董锋. 基于FSP制备GNSs/6061铝基复合材料[J]. 兵器材料科学与工程, 2017, 40(4): 60-63.
[30] Zhang, Z.W., Liu, Z.Y., Xiao, B.L., Ni, D.R. and Ma, Z.Y. (2018) High Efficiency Dispersal and Strengthening of Graphene Reinforced Aluminum Alloy Composites Fabricated by Powder Metallurgy Combined with Friction Stir Processing. Carbon, 135, 215-223. [Google Scholar] [CrossRef] 
[31] 王艳, 范泽文, 赵建, 等. 3D打印制备碳纳米管/环氧树脂电磁屏蔽复合材料[J]. 复合材料学报, 2019, 36(1): 1-6.
[32] 王玉, 张靖翔, 张宝强, 等. 3D打印石墨烯基功能材料的研究进展[J]. 中国材料进展, 2018, 37(8): 620-631.
[33] Hu, Z., Chen, F., Xu, J., et al. (2018) 3D Printing Gra-phene-Aluminum Nanocomposites. Journal of Alloys and Compounds, 746, 269-276. [Google Scholar] [CrossRef] 

为你推荐