吸油烟机用多翼叶叶轮动平衡误差分析
Analysis Error on Dynamic Balance of Multi-Blade Impeller in the Range Hood
DOI: 10.12677/MET.2019.85049, PDF,   
作者: 胡承杰*：同济大学机械与能源工程学院，上海；浙江省健康智慧厨房系统集成重点实验室，浙江 宁波；李 斌, 张晓铁, 何立博：浙江省健康智慧厨房系统集成重点实验室，浙江 宁波；姬如一：机械工业上海蓝亚石化设备检测所有限公司，上海
关键词: 叶轮；动不平衡量；重复拆装；误差分析；Impeller； Dynamic Imbalance Quality； Repeated Disassembly； Error Analysis
摘要: 本文针对在重复拆装测量吸油烟机用多翼叶叶轮的动不平衡质量时，测试值波动较大的问题，通过计算分析和实验验证相结合，总结出主要因素，同时计算结果与实验的数据进行比较，验证理论分析的准确性，从而合理地解释了重复拆装测量叶轮动不平衡质量时，测试值会有较大波动的现象。通过分析总结，可以对以后的多翼叶叶轮的结构设计，增加一些设计依据，同时也为其他类似问题的研究者提供研究思路，为类似产品的设计者提供参考结论，也为类似产品的品质抽检提供一些思考。
Abstract: In this paper, aiming at the problem of large fluctuation of the test value when the dynamic un-balanced mass of multi-blade impeller used by the range hoods are repeatedly disassembled and measured, the main factors are summed up by the combination of calculation and experiment, and the results are compared with the experimental data to verify the accuracy of the theoretical analysis, and thus reasonably explain the phenomenon where the test value will have a greater fluctuation when repeatedly disassembling and measuring the dynamic unbalanced mass of mul-ti-blade impeller. Through the analysis and summary, we can add some design basis for designing the structure of the multi-winged impeller, but also provide the research ideas of the similar problem for other researchers and provide the reference conclusion for the similar product de-signer as well as some thinking for the similar product quality sampling.
文章引用：胡承杰, 李斌, 姬如一, 张晓铁, 何立博. 吸油烟机用多翼叶叶轮动平衡误差分析[J]. 机械工程与技术, 2019, 8(5): 423-429. https://doi.org/10.12677/MET.2019.85049

参考文献

[1] 诸永定, 易洪斌, 等. GB/T 17713 2011吸油烟机[S]. 北京: 中国标准出版社, 2012.
[2] 刘小民, 王星, 汤虎, 等. 我国吸油烟机性能改进技术研究进展[J]. 轻工机械, 2011, 29(3): 122-127.
[3] 金清肃, 郭聚东, 等. 大型引风机叶轮的动平衡问题及对策[J]. 风机技术, 2003(2): 21-22.
[4] 王学良. 动平衡对离心压缩机影响的分析与对策[J]. 风机技术, 2000(6): 56-57.
[5] 三轮修三, 下村玄. 旋转机械的平衡[M]. 北京: 机械工业出版社, 1992: 82-100.
[6] 宋菊平, 秦如, 等. 动不平衡测量电路频率特性原位补偿技术研究[J]. 仪表仪器学报, 2017, 38(5): 1143-1149.
[7] 郭天浩, 丁力. 基于Goertzel算法的转子动不平衡测量方法[J]. 测控技术, 2019, 38(7): 1143-1149.
[8] 魏巍, 张海鹏, 谈演. 基于M估计的转子不平衡量的识别[J]. 科技创新与应用, 2018(6): 87-89.
[9] Wang, A.M., Cheng, X.H., Meng, G.Y., et al. (2017) Dynamic Analysis and Numerical Experiments for Balancing of the Continuous Single-Disc and Single-Span Rotor-Bearing System. Mechanical Systems and Signal Processing, 86, 151-176. [Google Scholar] [CrossRef] 
[10] 商景泰. 通风机手册[M]. 北京: 机械工业出版社, 1994: 296-307.
[11] 赵钧. 气浮立式硬支承动平衡机研究[J]. 中国机械工程, 2006, 17(5): 481-484.
[12] 陈剑飞, 梁睦, 等. 双面立式动平衡机理论分析和应用[J]. 纺织学报, 2005, 26(4): 83-85.
[13] Parkinson, A.G. (1991) Balancing of Rotating Machinery. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science, 205, 53-56. [Google Scholar] [CrossRef] 
[14] 余先涛. 软支承刚性转子动平衡测试系统设计[J]. 机械电子, 2000(3): 44-46.

为你推荐