NO2在本征及改性的LaFeO3(010)表面的吸附研究
NO2 Adsorption on the Intrinsic and Doped LaFeO3(010) Surface
DOI: 10.12677/HJCET.2019.96072, PDF,   
作者: 王 鹤, 辛 松, 张润洁：华中科技大学能源与动力工程学院，湖北 武汉
关键词: 密度泛函理论；LaFeO3(010)表面；NO2；吸附；掺杂；Density Functional Theory； LaFeO3(010) Surface； NO2； Adsorption； Doping
摘要: 基于密度泛函理论(DFT)，利用第一性原理研究了NO2分子在本征和掺杂的LaFeO3 (010)表面的吸附行为。结果发现NO2分子和LaFeO3 (010)表面之间的最佳吸附反应发生在N原子和Fe原子之间。在整个吸附反应中，电子从LaFeO3 (010)表面转移至NO2分子，NO2分子充当电子的受体。电子定域函数和态密度的计算结果显示，表面Fe原子的3d轨道和N原子的2p轨道之间发生的强烈轨道杂化。X2+ (X = Ni, Cu, Zn)取代Fe3+能有效提升LaFeO3 (010)表面对NO2分子的吸附性能，其中Zn2+掺杂体系吸附作用更强。
Abstract: Based on density functional theory (DFT), the first principles calculations were performed to study the adsorption behavior of NO2 molecule on the intrinsic and doped LaFeO3 (010) surface. The results indicated that the preferential adsorption configuration occurred between Fe-N atoms. In the adsorption process, NO2 acted as the electron acceptor, which obtained charges transferring from LaFeO3 (010) surface. It was also certificated by the analysis of electron localization function and state density calculation, which showed that the strong orbital hybridization existed between the 3d orbital of Fe atom on the surface and the 2p orbital of N atom. Substituting Fe3+ atom by Ni, Cu or Zn atom can effectively improve the adsorption performance of NO2. Compared with doped atoms, Zn2+ atom induced the stronger adsorption properties.
文章引用：王鹤, 辛松, 张润洁. NO2在本征及改性的LaFeO3(010)表面的吸附研究[J]. 化学工程与技术, 2019, 9(6): 511-521. https://doi.org/10.12677/HJCET.2019.96072

参考文献

[1] Cheng, Y.F., et al. (2016) Reactive Nitrogen Chemistry in Aerosol Water as a Source of Sulfate during Haze Events in China. Science Advances, 2, e1601530. [Google Scholar] [CrossRef] [PubMed]
[2] Zhao, B., et al. (2013) NOx Emissions in China: Historical Trends and Future Perspectives. Atmospheric Chemistry and Physics, 13, 9869-9897. [Google Scholar] [CrossRef] 
[3] Roy, S. and Baiker, A. (2009) NOx Storage-Reduction Catalysis: From Mechanism and Materials Properties to Storage-Reduction Performance. Chemical Reviews, 109, 4054-4091. [Google Scholar] [CrossRef] [PubMed]
[4] Shao, J., et al. (2019) A Superior Liquid Phase Catalyst for Enhanced Absorption of NO2 Together with SO2 after Low Temperature Ozone Oxidation for Flue Gas Treatment. Fuel, 247, 1-9. [Google Scholar] [CrossRef] 
[5] Chen, L., et al. (2018) Catalytic Decomposition Performance for O3 and NO2 in Humid Indoor Air on a MnOx/Al2O3 Catalyst Modified by a Cost-Effective Chemical Grafting Method. Journal of Environmental Sciences, 74, 58-70. [Google Scholar] [CrossRef] [PubMed]
[6] Shi, C., et al. (2015) Adsorption Properties of CO Molecule on the Orthorhombic Structure LaMnO3 (010) Surface. Computational Materials Science, 98, 83-87. [Google Scholar] [CrossRef] 
[7] Wang, X.-F., Ma, W., Song, X.-Z. and Hu, J.-F. (2017) A Theoretical Insight into CO2 Sensing Performance on the Orthorhombic LaMnO3 (010) Surface. Chemical Physics Letters, 687, 138-142. [Google Scholar] [CrossRef] 
[8] Li, F., Shi, C. and Hu, J. (2017) Theoretical Explanation of CO2 Sensing Characteristics and Adsorption Properties on SmCoO3 (001) Surface. Computational Materials Science, 133, 108-115. [Google Scholar] [CrossRef] 
[9] Zhang, Y., Sun, L., Hu, J. and Gao, F. (2015) Adsorption of NO on the SrFeO3 (001) Surface: A DFT Study. Computational Materials Science, 102, 135-139. [Google Scholar] [CrossRef] 
[10] Rakotovelo, G., et al. (2009) Adsorption of CO, CO2 and NO Molecules on a BaTiO3 (001) Surface. Surface Science, 603, 1221-1228. [Google Scholar] [CrossRef] 
[11] Niu, X., Li, H. and Liu, G. (2005) Preparation, Characterization and Photocatalytic Properties of REFeO3 (RE=Sm, Eu, Gd). Journal of Molecular Catalysis A: Chemical, 232, 89-93. [Google Scholar] [CrossRef] 
[12] Arendt, E., et al. (2008) Structuration of LaMnO3 Perovskite Catalysts on Ceramic and Metallic Monoliths: Physico-Chemical Characterisation and Catalytic Activity in Methane Combustion. Applied Catalysis A: General, 339, 1-14. [Google Scholar] [CrossRef] 
[13] Zhang, R., Alamdari, H. and Kaliaguine, S. (2006) Fe-Based Perovskites Substituted by Copper and Palladium for NO+CO Reaction. Journal of Catalysis, 242, 241-253. [Google Scholar] [CrossRef] 
[14] Kim, C.H., Qi, G., Dahlberg, K. and Li, W. (2010) Stronti-um-Doped Perovskites Rival Platinum Catalysts for Treating NOx in Simulated Diesel Exhaust. Science, 327, 1624-1627. [Google Scholar] [CrossRef] [PubMed]
[15] Chen, Y.-H., et al. (2014) First-Principle Study of H2 Adsorption on LaFeO3(110) Surface. Journal of Nanomaterials, 2014, Article ID: 758985. [Google Scholar] [CrossRef] 
[16] Liu, X., et al. (2009) First-Principles Study of O2 Adsorption on the LaFeO3 (010) Surface. Sensors and Actuators B: Chemical, 139, 520-526. [Google Scholar] [CrossRef] 
[17] Sun, L., et al. (2011) Adsorption of CO on the O2 Pre-Adsorbed LaFeO3 (010) Surface: A Density Functional Theory Study. Current Applied Physics, 11, 1278-1281. [Google Scholar] [CrossRef] 
[18] Wang, X., Sun, L., Hu, J. and Qin, H.W. (2013) CO2 Sensing Properties and Mechanism of Nanocrystalline LaFeO3 Sensor. Sensors and Actuators B: Chemical, 188, 965-971. [Google Scholar] [CrossRef] 
[19] Sun, L., Hu, J., Gao, F. and Qin, H.W. (2011) Adsorption of For-maldehyde on the Fe Site of Clean and M2+ (Ca2+, Sr2+ and Ba2+) Doped LaFeO3 (010) Surface. Applied Surface Science, 257, 8692-8695. [Google Scholar] [CrossRef] 
[20] Sun, L., Hu, J., Gao, F., Zhang, Y. and Qin, H.W. (2011) First-Principle Study of NO Adsorption on the LaFeO3 (010) Surface. Physica B-Condensed Matter, 406, 4105-4108. [Google Scholar] [CrossRef] 
[21] Yoon, J.-W., Di Bartolomeo, E. and Traversa, E. (2011) NO2 Adsorption Behaviour on LaFeO3 Electrodes of YSZ-Based Non-Nernstian Electrochemical Sensors. Journal of Elec-troceramics, 26, 28-31. [Google Scholar] [CrossRef] 
[22] Kizaki, H. and Kusakabe, K. (2012) Ab-Initio Study of Sr-Doping Effects on Nitric Oxide Adsorption on the LaO (001) Surface of LaFeO3. Surface Science, 606, 1783-1789. [Google Scholar] [CrossRef] 
[23] Taylor, F.H., Buckeridge, J. and Catlow, C.R.A. (2017) Screening Divalent Metals for A- and B-Site Dopants in LaFeO3. Chemistry of Materials, 29, 8147-8157. [Google Scholar] [CrossRef] 
[24] Yao, X., Liu, J. and Wang, W. (2018) Influence of B-Site Transition Metal on NO Oxidation over LaBO3 (B=Mn, Fe and Co) Perovskite Catalysts. AIP Advances, 8, Article ID: 115222. [Google Scholar] [CrossRef] 
[25] Kizaki, H. and Kusakabe, K. (2012) DFT-GGA Study of NO Adsorption on the LaO (001) Surface of LaFeO3. Surface Science, 606, 337-343. [Google Scholar] [CrossRef] 
[26] Sun, L., Hu, J., Qin, H., Zhao, M. and Fan, K. (2011) Influences of Ca Doping and Oxygen Vacancy upon Adsorption of CO on the LaFeO3 (010) Surface: A First-Principles Study. Journal of Physical Chemistry C, 115, 5593-5598. [Google Scholar] [CrossRef]