振动筛引发的楼层振动分析与减振处理
Floor Vibration Analysis and Vibration Reduction Treatment Caused by Vibrating Screen
DOI: 10.12677/MET.2019.86058, PDF,   
作者: 赵宗琦, 段 权*, 项靖海, 谢燕媚:西安交通大学化学工程与技术学院,陕西 西安
关键词: 仿真模型振动分析模态分析减振Simulation Model Vibration Analysis Modal Analysis Vibration Reduction
摘要: 采用振动信号测试系统结合有限元数值模拟的方式,对振动筛造成的楼层振动进行分析,对比发现激振频率和固有频率相近是产生振动的主要原因,找到放大振动的潜在影响因素,并提出了可行的解决方案,针对性的添加阻尼等。对大型设备的放置位置规划,工作设备的周围空间改造和维护具有指导意义。用实验与ANSYS模拟结合的方式,提出了在振动诊断方向上的新的解决思路。
Abstract: The vibration signal test system is combined with the simulation numerical simulation method to analyze the floor vibration caused by the vibrating screen. It is found that the excitation frequency and the natural frequency are close to each other, which is the main reason for the vibration. The potential influencing factors of the amplified vibration are found and feasible. The solution, targeted to add damping and so on. It is instructive to plan the placement of large equipment and to modify and maintain the surrounding space of the working equipment. Using the combination of experiment and simulation, a new solution to the direction of vibration diagnosis is proposed.
文章引用:赵宗琦, 段权, 项靖海, 谢燕媚. 振动筛引发的楼层振动分析与减振处理[J]. 机械工程与技术, 2019, 8(6): 500-510. https://doi.org/10.12677/MET.2019.86058

参考文献

[1] 赵正军. 浅析机械设备故障检测技术[J]. 智能城市, 2018, 4(20): 161-162.
[2] 黄武, 殷盛福, 文华. 基于测试装备高速传动系统的振动分析[J]. 新型工业化, 2019, 9(2): 52-56.
[3] 党锡淇, 陈守五. 活塞式压缩机气流脉动与管道振动[M]. 西安: 西安交通大学出版社, 1984: 143-159.
[4] 唐山青. 基于ANSYS的长臂架模态分析与试验研究[J]. 建设机械技术与管理, 2018, 31(10): 50-53.
[5] Giacomelli, E., Passeri M., Zagli, F. and Generosi, S. (2004) Control of Pressure Pulsations and Vibrations in Hypercompressors for LDPE Plants. PVP-High Pressure Technology—2004 Innovations and Advances in High Pressure Technologies, San Diego, California, USA, 25-29 July 2004, 73-79. [Google Scholar] [CrossRef
[6] Giacomelli, E., Passeri, M., Giusti, S., Zagli, F. and Generosi, S. (2004) Modeling of Pressure Pulsations for Reciprocating Compressors and Interaction with Mechanical System. Proceedings of 7th Biennial Conference on Engineering System Design and Analysis, Manchester, UK, 19-22 July 2004, 945-952. [Google Scholar] [CrossRef