溶剂退火制备高质量MA3Bi2I9钙钛矿薄膜与太阳能电池
Solvent Annealing for High Quality MA3Bi2I9 Perovskite Thin Films and Solar Cells
DOI: 10.12677/MS.2020.101005, PDF,  被引量    国家自然科学基金支持
作者: 刘艳领, 王星辰, 孙振兴, K. P. Homewood, 高 云*, 雷丙龙*：湖北大学材料与工程学院，湖北 武汉
关键词: 无铅；钙钛矿；蒸镀法；气氛处理；太阳能电池；Lead Free； Perovskite； Evaporation； Atmosphere Treatment； Solar Cell
摘要: 与铅钙钛矿太阳能电池相比，铋基钙钛矿太阳能电池在无毒性和稳定性方面表现出很好的优势。在(CH3NH3)3Bi2I9钙钛矿太阳能电池的研究中，光吸收层薄膜的质量严重制约着电池的光电转化效率。本研究在两步蒸镀与掺氯的基础上,采用DMF气氛退火处理，获得了高致密、无孔洞且大晶粒的(CH3NH3)3Bi2I9薄膜。该处理减少了薄膜内部缺陷，增强薄膜光吸收，增加载流子寿命。与未处理的薄膜相比，电池的光电转换效率提升了52.9%。本研究为钙钛矿薄膜质量的优化以及器件性能的提升提供了可行的解决方案。
Abstract: Bismuth based perovskite solar cells possess the features of non-toxicity and high stability, which are considered as two significant factors in the emerging perovskite solar cells. The quality of the light absorption layer has a remarkable impact on the conversion efficiency of (CH3NH3)3Bi2I9 per-ovskite solar cells. Herein, (CH3NH3)3Bi2I9 thin films with features of highly compact, pinhole-free and large grains were prepared by procedures of two-step evaporation, chlorine doping and an-nealing under a DMF atmosphere. The DMF solvent annealing can diminish the internal defects of thin-film, and thereby enhances the absorbance as well as prolonging the life time of charge carries. The conversion efficiency shows dramatic enhancement by 52.9% compared with the solar cells from thin-films without DMF annealing. This work provides insights into the (CH3NH3)3Bi2I9 per-ovskite solar cells with optimized thin-film quality and improved device performance.
文章引用：刘艳领, 王星辰, 孙振兴, K. P. Homewood, 高云, 雷丙龙. 溶剂退火制备高质量MA3Bi2I9钙钛矿薄膜与太阳能电池[J]. 材料科学, 2020, 10(1): 31-39. https://doi.org/10.12677/MS.2020.101005

参考文献

[1] Kojima, A., Teshima, K., Shirai, Y. and Miyasaka, T. (2009) Organometal Halide Perovskites as Visible-Light Sensi-tizers for Photovoltaic Cells. Journal of the American Chemical Society, 131, 6050-6051. [Google Scholar] [CrossRef] [PubMed]
[2] Kim, M., Kim, G.-H., Lee, T.K., Choi, I.W., Choi, H.W., Jo, Y., Yoon, Y.J., Kim, J.W., Lee, J., Huh, D., Lee, H., Kwak, S.K., Kim, J.Y. and Kim, D.S. (2019) Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells. Joule, 3, 2179-2192. [Google Scholar] [CrossRef] 
[3] Li, X., Liu, Y., Eze, V.O., Mori, T., Huang, Z., Homewood, K.P., Gao, Y. and Lei, B. (2019) Amorphous Na-noporous WOx Modification for Stability Enhancement and Hysteresis Reduction in TiO2-Based Perovskite Solar Cells. Solar Energy Materials and Solar Cells, 196, 157-166. [Google Scholar] [CrossRef] 
[4] Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z. and You, J. (2019) Surface Passivation of Perovskite Film for Efficient Solar Cells. Nature Photonics, 13, 460-466. [Google Scholar] [CrossRef] 
[5] Gao, P., Grätzel, M. and Nazeeruddin, M.K. (2014) Organohalide Lead Perovskites for Photovoltaic Applications. Energy & Environmental Science, 7, 2448-2463. [Google Scholar] [CrossRef] 
[6] Hao, F., Stoumpos, C.C., Cao, D.H., Chang, R.P.H. and Kanatzidis, M.G. (2014) Lead-Free Solid-State Organic-Inorganic Halide Perovskite Solar Cells. Nature Photonics, 8, 489-494. [Google Scholar] [CrossRef] 
[7] Noel, N.K., Stranks, S.D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G.E., Pathak, S.K., Johnston, M.B., Petrozza, A., Herz, L.M. and Snaith, H.J. (2014) Lead-Free Organic-Inorganic Tin Halide Perovskites for Photovoltaic Applications. Energy & Environmental Science, 7, 3061-3068. [Google Scholar] [CrossRef] 
[8] Park, B.-W., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G. and Johansson, E.M.J. (2015) Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application. Advanced Materials, 27, 6806-6813. https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.201501978 [Google Scholar] [CrossRef] [PubMed]
[9] Zhao, Z., Gu, F., Li, Y., Sun, W., Ye, S., Rao, H., Liu, Z., Bian, Z. and Huang, C. (2017) Mixed-Organic-Cation Tin Iodide for Lead-Free Perovskite Solar Cells with an Efficiency of 8.12%. Advanced Science, 4, Article ID: 1700204. https://onlinelibrary.wiley.com/doi/abs/10.1002/advs.201700204 [Google Scholar] [CrossRef] [PubMed]
[10] Wang, F., Ma, J., Xie, F., Li, L., Chen, J., Fan, J. and Zhao, N. (2016) Organic Cation-Dependent Degradation Mechanism of Organotin Halide Perovskites. Advanced Functional Materials, 26, 3417-3423. https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201505127 [Google Scholar] [CrossRef] 
[11] Vigneshwaran, M., Ohta, T., Iikubo, S., Kapil, G., Ripolles, T.S., Ogomi, Y., Ma, T., Pandey, S.S., Shen, Q., Toyoda, T., Yoshino, K., Minemoto, T. and Hayase, S. (2016) Facile Syn-thesis and Characterization of Sulfur Doped Low Bandgap Bismuth Based Perovskites by Soluble Precursor Route. Chemistry of Materials, 28, 6436-6440. [Google Scholar] [CrossRef] 
[12] Lehner, A.J., Fabini, D.H., Evans, H.A., Hébert, C.-A., Smock, S.R., Hu, J., Wang, H., Zwanziger, J.W., Chabinyc, M.L. and Seshadri, R. (2015) Crystal and Electronic Structures of Complex Bismuth Iodides A3Bi2I9 (A = K, Rb, Cs) Related to Perovskite: Aiding the Rational Design of Photovoltaics. Chemistry of Materials, 27, 7137-7148. [Google Scholar] [CrossRef] 
[13] Lyu, M., Yun, J.-H., Cai, M., Jiao, Y., Bernhardt, P.V., Zhang, M., Wang, Q., Du, A., Wang, H., Liu, G. and Wang, L. (2016) Organic-Inorganic Bismuth (III)-Based Material: A Lead-Free, Air-Stable and Solution-Processable Light-Absorber beyond Organolead Perovskites. Nano Research, 9, 692-702. [Google Scholar] [CrossRef] 
[14] Kulkarni, A., Singh, T., Ikegami, M. and Miyasaka, T. (2017) Photovoltaic Enhancement of Bismuth Halide Hybrid Perovskite by N-methyl Pyrrolidone-Assisted Morphology Conversion. RSC Advances, 7, 9456-9460. [Google Scholar] [CrossRef] 
[15] Jain, S.M., Phuyal, D., Davies, M.L., Li, M., Philippe, B., De Castro, C., Qiu, Z., Kim, J., Watson, T., Tsoi, W.C., Karis, O., Rensmo, H., Boschloo, G., Edvinsson, T. and Durrant, J.R. (2018) An Effective Approach of Vapour Assisted Morphological Tailoring for Reducing Metal Defect Sites in Lead-Free, (CH3NH3)3Bi2I9 Bismuth-Based Perovskite Solar Cells for Improved Performance and Long-Term Stability. Nano Energy, 49, 614-624. http://www.sciencedirect.com/science/article/pii/S2211285518303197 [Google Scholar] [CrossRef] 
[16] Lan, C., Luo, J., Zhao, S., Zhang, C., Liu, W., Hayase, S. and Ma, T. (2017) Effect of Lead-Free (CH3NH3)3Bi2I9 Perovskite Addition on Spectrum Absorption and Enhanced Pho-tovoltaic Performance of Bismuth Triiodide Solar Cells. Journal of Alloys and Compounds, 701, 834-840. [Google Scholar] [CrossRef] 
[17] Ran, C., Wu, Z., Xi, J., Yuan, F., Dong, H., Lei, T., He, X. and Hou, X. (2017) Construction of Compact Me-thylammonium Bismuth Iodide Film Promoting Lead-Free Inverted Planar Heterojunction Organohalide Solar Cells with Open-Circuit Voltage over 0.8 V. The Journal of Physical Chemistry Letters, 8, 394-400. [Google Scholar] [CrossRef] [PubMed]
[18] Abulikemu, M., Ould-Chikh, S., Miao, X., Alarousu, E., Murali, B., Ngongang Ndjawa, G.O., Barbé, J., El Labban, A., Amassian, A. and Del Gobbo, S. (2016) Optoelectronic and Photovoltaic Properties of the Air-Stable Organohalide Semiconductor (CH3NH3)3Bi2I9. Journal of Materials Chemistry A, 4, 12504-12515. [Google Scholar] [CrossRef] 
[19] Mali, S.S., Kim, H., Kim, D.-H. and Kook Hong, C. (2017) Anti-Solvent Assisted Crystallization Processed Methylammonium Bismuth Iodide Cuboids towards Highly Stable Lead-Free Perovskite Solar Cells. Chemistry Select, 2, 1578-1585. https://onlinelibrary.wiley.com/doi/abs/10.1002/slct.201700025 [Google Scholar] [CrossRef] 
[20] Zhang, X., Wu, G., Gu, Z., Guo, B., Liu, W., Yang, S., Ye, T., Chen, C., Tu, W. and Chen, H. (2016) Active-Layer Evolution and Efficiency Improvement of (CH3NH3)3Bi2I9-Based Solar Cell on TiO2-Deposited ITO Substrate. Nano Research, 9, 2921-2930. [Google Scholar] [CrossRef] 
[21] Zhang, Z., Li, X., Xia, X., Wang, Z., Huang, Z., Lei, B. and Gao, Y. (2017) High-Quality (CH3NH3)3Bi2I9 Film-Based Solar Cells: Pushing Efficiency up to 1.64%. The Journal of Physical Chemistry Letters, 8, 4300-4307. [Google Scholar] [CrossRef] [PubMed]
[22] 李晓伟, 刘艳领, Homewood, K.P., 黄忠兵, 高云, 雷丙龙. 两步蒸镀法制备高质量(CH3NH3)3Bi2I9钙钛矿薄膜[J]. 材料科学, 2019(9): 115.
[23] Lee, L.C., Huq, T.N., MacManus-Driscoll, J.L. and Hoye, R.L.Z. (2018) Research Update: Bis-muth-Based Perovskite-Inspired Photovoltaic Materials. APL Materials, 6, Article ID: 084502. https://aip.scitation.org/doi/abs/10.1063/1.5029484 [Google Scholar] [CrossRef] 

为你推荐