高温高压环境固井水泥研究进展
Research Advances in Oil Well Cement Subjected to High Temperature and High Pressure Curing Environment
DOI: 10.12677/JOGT.2020.421002, PDF,  被引量    国家自然科学基金支持
作者: 庞学玉, 步玉环：非常规油气开发教育部重点实验室(中国石油大学(华东))，山东 青岛；中国石油大学(华东)石油工程学院，山东 青岛；秦建鲲：中国石油大学(华东)石油工程学院，山东 青岛；袁中涛, 王银东, 王中丽：中石油塔里木油田分公司油气工程研究院，新疆 库尔勒
关键词: 油井水泥；强度衰退；加砂硅酸盐水泥；高铝水泥；磷铝酸盐水泥；Oil Well Cement； Strength Retrogression； Silica Enriched Portland Cement； High Aluminum Cement； Phosphoaluminate Cement
摘要: 高温高压环境是深井、超深井、地热井、稠油热采井等固井面临的最大挑战之一；水泥石的高温强度衰退现象早在20世纪50年代就得到认识，经过近70年的研究，抗高温油井水泥体系的研究已经取得了很大的进展。该文章对本领域的研究成果进行了梳理与总结，调研了三种抗高温油井水泥体系，即加砂硅酸盐水泥、高铝水泥和磷铝酸盐水泥，分析了各种体系的优点与不足；重点阐述了常用加砂硅酸盐水泥的高温强度衰退机理及其物理力学性能影响因素，从而为油井水泥抗高温性能的进一步研究以及现场的配方优化设计提供参考依据。调研发现在较高温度环境加砂硅酸盐水泥均会出现不同程度的强度衰退现象，而减缓强度衰退的方法主要包括减小硅砂粒径、优化颗粒级配和提高水泥浆中的固相体积分数等。
Abstract: High temperature and high pressure environment is the biggest challenge faced by cementing deep and ultra-deep wells, geothermal wells, and steam injection wells. The strength retrogression phe-nomenon of cement at high temperature has been identified as early as in the 1950s; after nearly 70 years of research, significant progresses have been made with regard to high-temperature-resistant cement systems, which are reviewed in this paper. Specifically, three temperature-resistant cement systems were investigated, including silica enriched Portland cement (silica-PC) system, high aluminum cement, and phosphoaluminate cement, with each system’s advantages and disadvantages analyzed. The main focus is on the mechanism of strength retrogression as well as influencing factors of physical and mechanical properties of the most commonly used system, i.e. the silica-PC system. Information included in this paper provide references for further research to improve the temperature resistance of oil well cement systems and may be used to guide cement formulation design in the field. The main finding is that the silica-PC system typically experiences various degrees of strength retrogression at relatively high temperature, and the main methods to mitigate such effect are through reduction of silica particle size, optimization of particle packing and increasing volume fraction of solid phase in the mixture.
文章引用：庞学玉, 秦建鲲, 步玉环, 袁中涛, 王银东, 王中丽. 高温高压环境固井水泥研究进展[J]. 石油天然气学报, 2020, 42(1): 13-23. https://doi.org/10.12677/JOGT.2020.421002

参考文献

[1] 夏修建. 高温深井固井用聚合物/纳米SiO2复合添加剂的研究[D]: [博士学位论文]. 天津: 天津大学, 2017.
[2] 张兴才. 固井超高温水泥浆体系研究及应用[D]: [硕士学位论文]. 成都: 西南石油大学, 2016.
[3] Cuello Jime-nez, W., Urdaneta, J.A., Pang, X., et al. (2016) Innovation of Annular Sealants during the Past Decades and Their Di-rect Relationship with On/Offshore Wellbore Economics. SPE-180041, SPE Bergen One Day Seminar, Grieghallen, Bergen. [Google Scholar] [CrossRef] 
[4] 李中, 刘书杰, 李炎军, 等. 南海高温高压钻完井关键技术及工程实践[J]. 中国海上油气, 2017, 29(6): 100-107.
[5] 马丁, 刘佳琳, 饶鸿飞. 热采井抗高温长效水泥固井技术研究与现场应用[J]. 内蒙古石油化工, 2014 (17): 80-84.
[6] 蒋祖军, 郭新江, 王希勇. 天然气深井超深井钻井技术[M]. 北京: 中国石化出版社, 2011.
[7] 张燕. 近年来国外钻井技术的主要进步与发展特点[J]. 探矿工程(岩土钻掘工程), 2007, 34(10): 76-79.
[8] 刘硕琼, 齐奉忠. 中国石油固井面临的挑战及攻关方向[J]. 石油钻探技术, 2013, 41(6): 6-11.
[9] 林辉, 林志辉, 王贵富, 等南堡3-81井高温尾管固井技术[J].钻井液与完井液, 2014, 31(6): 89-91.
[10] 孙勤亮, 付家文, 郑忠茂, 等. 新港1井深井高温小间隙尾管固井技术综[J]. 中国化工贸易, 2013(7): 259-259+294.
[11] 冯林, 母亚军, 杨代明, 等. 马深1井二开大井眼优快钻井技术[J]. 石油钻采工艺, 2016, 38(5): 577-582.
[12] 张建龙, 温伟, 刘卫东, 等. 顺北1-4H井超深小井眼中短半径水平井钻井难点及技术对策[J]. 探矿工程(岩土钻掘工程), 2018, 45(4): 22-27.
[13] 黄卫东, 陈彬平, 肖伟, 等. 南海东方1-1-14高温高压井尾管固井技术[C]//中海油田服务股份有限公司2011年科技论文报告会论文集. 中海油田服务股份有限公司油田化学事业部湛江基地. 中海油田服务股份有限公司油田化学研究院, 2011: 82-85.
[14] 柳健, 齐静, 苏洪生. 莫深1井φ244.5 mm+φ250.8 mm中完固井水泥浆技术[J]. 新疆石油天然气, 2008, 4(3): 22-26.
[15] 张景富, 俞庆森, 徐明, 等. G级油井水泥的水化及硬化[J]. 硅酸盐学报, 2002, 30(2): 167-171.
[16] Abid, K., Gholami, R., Tiong, M., et al. (2019) A Pozzolanic Supplementary Material to Reinforce Class G Cement Used for Drilling and Completion Operations. Journal of petroleum science and engineering, 177, 79-92. [Google Scholar] [CrossRef] 
[17] Vidal, A.V., Araujo, R.G.S. and Freitas, J.C.O. (2018) Sustain-able Cement Slurry Using Rice Husk Ash for High Temperature Oil Well. Journal of Cleaner Production, 204, 292-297. [Google Scholar] [CrossRef] 
[18] Swayze, M. (1954) Effect of High Temperature on Strength of Oil-Well Cements (Mid-Continent District Study Committee on Cementing Practices and Testing of Oil-Well Cements). Drilling and Production Practice, New York, API-54-072.
[19] 代奎, 孙超, 张景富, 等. 高温下G级油井水泥强度的衰退及合理硅砂加量[J]. 东北石油大学学报, 2004, 28(5): 98-100.
[20] 杨智光, 崔海清, 肖志兴. 深井高温条件下油井水泥强度变化规律研究[J]. 石油学报, 2008, 29(3): 435-437.
[21] 张景富, 徐明, 高莉莉, 等. 温度及外加剂对G级油井水泥强度的影响[J]. 石油钻采工艺, 2003, 25(3): 19-23.
[22] Rust, C.F. and Wood, W.D. (1960) Laboratory Evaluations and Field Testing of Silica-CMHEC-Cement Mixtures. Journal of Petroleum Technology, 12, 25-29. [Google Scholar] [CrossRef] 
[23] 符军放. 掺硅粉高水灰比水泥石高温强度衰退现象分析[J]. 钻井液与完井液, 2017, 34(1): 112-115.
[24] 路飞飞, 李斐, 田娜娟, 等. 复合加砂抗高温防衰退水泥浆体系[J]. 钻井液与完井液, 2017, 34(4): 85-89.
[25] Krakowiak, K.J., Thomas, J.J., Muss, S., et al. (2015) Nano-Chemo-Mechanical Signature of Conventional Oil-Well Cement Systems: Effects of Elevated Temperature and Curing Time. Cement & Concrete Research, 67, 103-121. [Google Scholar] [CrossRef] 
[26] Krakowiak, K.J., Thomas, J.J., James, S., et al. (2018) De-velopment of Silica-Enriched Cement-Based Materials with Improved Aging Resistance for Application in High-Temperature Environments. Cement & Concrete Research, 105, 91-110. [Google Scholar] [CrossRef] 
[27] Reddy, B.R., Zhang, J. and Ellis, M. (2016) Cement Strength Retrogression Issues in Offshore Deep Water Applications-Do We Know Enough for Safe Cementing. Off-shore Technology Conference, Houston, TX. [Google Scholar] [CrossRef] 
[28] Thomas, J.J., James, S., Ortega, J.A., et al. (2012) Fundamental Investi-gation of the Chemical and Mechanical Properties of High-Temperature-Cured Oilwell Cements. Offshore Technology Conference, Houston, TX. [Google Scholar] [CrossRef] 
[29] Pernites, R.B. and Santra, A.K. (2016) Portland Cement Solutions for Ul-tra-High Temperature Wellbore Applications. Cement & Concrete Composites, 72, 89-103. [Google Scholar] [CrossRef] 
[30] 柳世杰. 微硅水泥体系的开发及其现场应用研究[D]: [博士学位论文]. 成都: 西南石油大学, 2012.
[31] Iverson, B., Waugh, B. and Maxson, J. (2014) High-Temperature Exposure of Oil Well Cements, Characterization of Minerals. In: Carpenter, J.S., Bai, C., Hwang, J., et al., Eds., Metals and Materials, Wiley, New York, 17-24. [Google Scholar] [CrossRef] 
[32] 张宇震. 中国铝酸盐水泥的生产与发展[J]. 水泥, 2003(7): 42-45.
[33] 刘非凡. 改性高铝水泥体系降失水剂研究[D]: [硕士学位论文]. 青岛: 中国石油大学(华东), 2016.
[34] Wei, X., Liu, X., Duan, Y., et al. (2017) Property Transformation of a Modified Sulfoaluminate Grouting Material under Pressure Circulation for a Water-Sealed Underground Oil Cavern. Construction and Building Materials, 140, 210-220. [Google Scholar] [CrossRef] 
[35] 马聪, 步玉环, 赵邵彪, 等. 固井用铝酸盐水泥改性试验研究[J]. 建筑材料学报, 2015, 18(1): 100-106.
[36] 彭家惠, 顾小波. 高铝水泥改性研究[J]. 中国建材科技, 1998(3): 8-11.
[37] 姜奉华, 郑少华. 高铝水泥系统中硅铝酸二钙向Q相的转变[J]. 硅酸盐学报, 2005, 33(4): 462-466.
[38] 王卫仑, 李仕群, 邢锋, 等. 磷铝酸盐水泥浆体抗碳化性能的研究[J]. 建筑材料学报, 2012, 15(3): 334-339+360.
[39] Li, Z., Wang, Y., Cheng, X., et al. (2014) The Slag Influence on High Temperature Resistance of Aluminophosphate Cement for Heavy Oil Thermal Recovery. High Temperature Materials and Processes, 33, 325-328. [Google Scholar] [CrossRef] 
[40] Li, S., Hu, J., Liu, B., et al. (1999) Fundamental Study on Alumi-nophosphate Cement. Cement & Concrete Research, 29, 1549-1554. [Google Scholar] [CrossRef] 
[41] 李保亮, 刘志强. 磷铝酸盐水泥研究进展[J]. 粉煤灰, 2014, 26(2): 43-46.
[42] 李仕群, 胡佳山, 王琦, 等. 磷铝酸盐水泥耐高温性能的初步研究[J]. 硅酸盐通报, 2001(4): 45-48+51.
[43] 步玉环, 马聪, 步万荣, 等. 适用于改性磷铝酸盐水泥的复合缓凝剂实验研究[J].石油钻探技术, 2013, 41(1): 14-19.
[44] 李连江. 火烧吞吐井用抗高温耐腐蚀水泥浆体系[J]. 钻井液与完井液, 2016, 33(1): 73-78.
[45] 姚晓, 葛荘, 汪晓静, 等. 加砂油井水泥石高温力学性能衰退机制研究进展[J]. 石油钻探技术, 2018, 46(1): 17-23.
[46] Jupe, A.C., Wilkinson, A.P., Luke, K., et al. (2008) Class H Cement Hydration at 180℃ and High Pressure in the Presence of Added Silica. Cement & Concrete Research, 38, 660-666. [Google Scholar] [CrossRef] 
[47] Liu, H., Yu, Y., Liu, H., et al. (2018) Hybrid Effects of Nano-Silica and Graphene Oxide on Mechanical Properties and Hydration Products of Oil Well Cement. Construction and Building Materials, 191, 311-319. [Google Scholar] [CrossRef] 
[48] 高元, 桑来玉, 杨广国, 等. 胶乳纳米液硅高温防气窜水泥浆体系[J]. 钻井液与完井液, 2016, 33(3): 67-72.
[49] 张弛, 陈小旭, 李长坤, 等. 抗高温硅酸盐水泥浆体系研究[J]. 钻井液与完井液, 2017, 34(5): 62-66.
[50] Krakowiak, K.J., Thomas, J.J., Muss, S., et al. (2015) Na-no-Chemo-Mechanical Signature of Conventional Oil-Well Cement Systems: Effects of Elevated Temperature and Curing Time. Cement & Concrete Research, 67, 103-121. [Google Scholar] [CrossRef] 
[51] Iverson, B., Maxson, J. and Bour, D. (2010) Strength Re-trogression in Cements under High-Temperature Conditions. Proceedings of the Thirty-Fifth Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, CA.
[52] 程小伟, 张明亮, 李早元, 等. 火烧油层工况下加砂油井水泥石失效演化研究[J]. 硅酸盐通报, 2016, 35(8): 2335-2340.
[53] 张颖, 陈大钧, 罗杨, 等. 硅砂对稠油热采井水泥石强度影响的室内试验[J]. 石油钻采工艺, 2010, 32(5): 44-47+52.
[54] 罗杨, 陈大钧, 尹水, 等. 抗高温蒸汽吞吐固井水泥浆体系研究[J]. 钻井液与完井液, 2009, 26(5): 50-54+92.
[55] 张忠旭, 齐志刚, 冯茜, 等. 高温下胶乳水泥的室内研究[J]. 钻井液与完井液, 2013, 30(6): 52-54.
[56] 陈超, 王龙, 李鹏飞, 等. SN井区抗高温液硅-胶乳防气窜水泥浆[J]. 钻井液与完井液, 2016, 33(5): 88-91.
[57] 刘慧婷, 刘硕琼, 齐奉忠. 紧密堆积优化固井水泥浆体系研究进展[J]. 硅酸盐通报, 2014, 33(9): 2269-2274+79.
[58] Kyritsis K., Hall C., Bentz D. P., et al. (2010) Relationship Between Engineering Properties, Mineralogy, and Microstructure in Cement-Based Hydroce-ramic Materials Cured at 200˚C - 350˚C. Journal of the American Ceramic Society, 92, 694-701. [Google Scholar] [CrossRef] 
[59] 李鹏晓, 孙富全, 何沛其, 等. 紧密堆积优化固井水泥浆体系堆积密实度[J]. 石油钻采工艺, 2017, 39(3): 307-312.
[60] Johnson, C.R., Knowles, J. and Ronnekleiv, B. (2016) Addressing the Health Risks of Silica Cement: A Custom Solution for Norway. SPE Bergen One Day Seminar, Grieghallen, Bergen, SPE-180016-MS. [Google Scholar] [CrossRef] 
[61] 路飞飞, 王永洪, 刘云, 等. 顺南井区高温高压防气窜尾管固井技术[J]. 钻井液与完井液, 2016, 33(2): 88-91.
[62] 王成文, 陈新, 周伟, 等. 纳米SiO2溶胶缓解油井水泥高温强度衰退的作用机理[J]. 天然气工业, 2019, 39(3): 72-79.
[63] 熊敏. S形水泥浆强度发展曲线成因分析及消除方法[J]. 石油钻探技术, 2018, 46(3): 39-43
[64] Swayze, M.A. (1954) Effects of High Pressures and Temperatures on Strength of Oil-Well Cements. API Spring Meeting of the Mid-Continent District, Division of Production, Oklahoma City.
[65] Scherer, G.W., Funkhouser, G.P. and Peethamparan, S. (2010) Effect of Pressure on Early Hydration of Class H and White Cement. Cement and Concrete Research, 40, 845-850. [Google Scholar] [CrossRef] 
[66] Jupe, A.C., Wilkinson, A.P. and Funkhouser, G.P. (2012) The Effect of Pressure on Tricalcium Silicate Hydration at Different Temperatures and in the Presence of Retarding Additives. Cement and Concrete Research, 42, 1083-1087. [Google Scholar] [CrossRef] 
[67] Pang, X., Meyer, C., Darbe, R., el al. (2013) Modeling the Effect of Curing Temperature and Pressure on Cement Hydration Kinetics. ACI Materials Journal, 110, 137-148. [Google Scholar] [CrossRef] 
[68] Pang, X., Cuello Jimenez, W. and Iverson, B.J. (2013) Hydration Kinetics Modeling of the Effect of Curing Temperature and Pressure on the Heat Evolution of Oil Well Cement. Cement and Concrete Research, 54, 69-76. [Google Scholar] [CrossRef] 
[69] Pang, X., Otieno, P.A. and Funkhouser, G.P. (2014) Modeling the Effect of Curing Pressure on the Viscosity Evolution of Oilwell Cement. 2014 AADE Fluids Technical Conference and Exhibition, Houston, TX, 15-16 April 2014.
[70] Pang, X., Meyer, C., Funkhouser, G.P., el al. (2015) Depressurization Damage of Oil Well Cement Cured for 3 Days at Various Pressures. Construction and Building Materials, 74, 268-277. [Google Scholar] [CrossRef]