厚硬顶板预裂弱化后应力场及裂隙场演化特征数值模拟研究
Numerical Simulation Study on Evolution Characteristics of Stress Field and Fracture Field after Hard Roof Pre-Cracking and Weakening
摘要: 工作面上覆厚硬顶板，开采过程中，若不经过弱化处理，易引起大面积悬顶，造成采场周围应力集中，工作面前方形成高强荷载源；工作面后方形成瓦斯存储库，顶板一旦垮塌易造成冲击地压及瓦斯异常涌出灾害的发生。因此，对于厚硬顶板要经过超前弱化处理，而摸清弱化前后采场周围应力场、裂隙场分布及演化特征是工作面灾害防治的基础和关键。通过UDEC数值模拟，结合矿井实际地质资料及相关煤岩力学参数，建立了平面数值模型。通过模拟计算，得出顶板弱化前后应力场、裂隙场分布特征。通过现场验证，模拟结果与现场实际吻合。这为顶板弱化及高位钻孔措施优化调整提供了理论依据。
Abstract: The working face is covered with a thick hard roof. In the mining process, if the roof is not weakened, it will easily lead to a large area of suspended roof, resulting in stress concentration around the stope and the formation of high-strength load source in front of the working face. Gas storage is formed at the rear of the working face. Therefore, the thick hard roof should be treated with advanced weakening, and the distribution and evolution characteristics of stress field and fracture field around the stope before and after weakening are the basis and key to the disaster prevention of the working face. Through UDEC numerical simulation, combined with the actual geological data of the mine and related mechanical parameters of coal and rock, the plane numerical model is established. Through the simulation calculation, the distribution characteristics of stress field and crack field before and after roof weakening are obtained. Through field verification, the simulation results are in good agreement with the field practice. This provides a theoretical basis for the weakening of roof and the optimization and adjustment of high drilling measures.
文章引用：马智勇. 厚硬顶板预裂弱化后应力场及裂隙场演化特征数值模拟研究[J]. 矿山工程, 2020, 8(3): 380-389. https://doi.org/10.12677/ME.2020.83048

参考文献

[1] 陈红. 中国煤矿重大事故中的不安全行为研究[M]. 北京: 科学出版社, 2006: 20-21.
[2] 张胜强. 我国煤矿事故致因理论及预防对策研究[D]: [硕士学位论文]. 杭州: 浙江大学, 2004: 6-7.
[3] 唐海, 李海波, 周青春, 等. 预裂爆破震动效应试验研究[J]. 岩石力学与工程学报, 2010(11): 50.
[4] 刘金凯, 赵健健, 张世青, 等. 急倾斜综放工作面坚硬顶煤弱化技术[J]. 中国煤炭, 2014(4): 52-55.
[5] 张伟. 预裂爆破增透技术在煤矿的应用[J]. 中国煤炭, 2009(3): 52-54.
[6] 钱鸣高, 许家林. 覆岩采动裂隙分布的“O”形圈特征研究[J]. 煤炭学报, 1998, 23(5): 466-469.
[7] 许家林, 钱鸣高. 覆岩采动裂隙分布特征的研究[J]. 矿山压力与顶板管理, 1997, 14(增1): 210-212.
[8] 许家林, 钱鸣高. 应用图象分析技术研究采动裂隙分布特征[J]. 煤矿开采, 1997(1): 37-39.
[9] 许家林, 王晓振, 刘文涛, 等. 覆岩主关键层位置对导水裂隙带高度的影响[J]. 岩石力学与工程学报, 2009, 28(2): 380-385.
[10] 刘泽功, 袁亮, 戴广龙, 等. 开采煤层顶板环形裂隙圈内走向长钻孔法抽放瓦斯研究[J]. 中国工程科学, 2004, 6(5): 32-38.
[11] 刘泽功, 袁亮. 首采煤层顶底板围岩裂隙内瓦斯储集及卸压瓦斯抽采技术研究[J]. 中国煤层气, 2006, 3(2): 11-12.
[12] 浦海, 缪协兴. 综放采场覆岩冒落与围岩支承压力动态分布规律的数值模拟[J]. 岩石力学与工程学报, 2004, 23(7): 1122-1123.
[13] 石必明, 刘泽功. 保护层开采上覆煤层变形特性数值模拟[J]. 煤炭学报, 2008, 33(1): 17-22.
[14] 刘桂丽, 杨跃奎, 撒占友. 煤矿采空区上覆岩层裂隙发育数值模拟试验[J]. 矿业研究与开发, 2012, 32(5): 75-80.
[15] 郝志勇, 林柏泉, 张家山, 等. 基于UDEC的保护层开采中覆岩移动规律的数值模拟与分析[J]. 中国矿业, 2007, 16(7): 81-84.

为你推荐