三次有理B样条曲线及其应用
Cubic Rational B-Spline Curve and Its Application
DOI: 10.12677/AAM.2020.98157, PDF,  被引量    国家自然科学基金支持
作者: 白根柱：浙江长征职业技术学院基础部，浙江 杭州；内蒙古民族大学数理学院，内蒙古 通辽
关键词: 有理三次B样条；光滑拼接；轴线异面；管道；Cubic Rational B-Spline Curve； Smooth Blending； Non-Coplana； Tube
摘要: 本文构造了通过给定控制多边形的始末端点且与始末控制多边形相切的一段三次有理B样条曲线，并以三次有理B样条曲线为轴线的管道光滑拼接了轴线异面管道。该方法相较于三段连续的三次均匀B样条曲线为轴线的三段光滑拼接的管道光滑拼接轴线异面管道和两段连续的二次均匀B样条曲线为轴线的两段光滑拼接的管道光滑拼接轴线异面管道其构造简单，易于应用。
Abstract: In this paper, we construct a section of cubic rational B-spline curve which is tangent to the start and end points of the control polygon. Tubes whose axes are in non-coplaner are smoothly blended by tube take cubic rational B-spline curve as its axis. Compared with the three-segment smooth  blending tubes with three-segment continuous cubic uniform B-spline curves as the axis between tubes whose axes are non-coplana, and the two-segment smooth blending tubes with quadratic uniform B-spline curves as the axis between tubes whose axes are non-coplana, the proposed method has the advantages of simple structure and easy application.
文章引用：白根柱. 三次有理B样条曲线及其应用[J]. 应用数学进展, 2020, 9(8): 1331-1337. https://doi.org/10.12677/AAM.2020.98157

参考文献

[1] Wang, H. and Bai, G.Z. (2013) Employing Generalized Cylindrical Helicoid Tube to Smoothly Blending Tubes Whose Axes Are Non-Coplanar. Applied Mechanics and Materials, 380-384, 1750-1754. [Google Scholar] [CrossRef] 
[2] Bai, G.-Z., Wang, H., et al. (2014) Smoothly Blending of Two Elliptic Cylinders Whose Axes Are Non-Coplanar. Aplied Mechanics and Materials, 309-312, 644-650. [Google Scholar] [CrossRef] 
[3] Bai, G.-Z., Liu, S.-Y., Wang, H., W, Z. and Zhao, J.-Y. (2014) A Novel Method for Smooth Blending Cylindrical Surfaces Whose Axes Are Non-Coplanar Based on Smooth Blending Axes. Applied Mechanics and Materials, 687-691, 1470-1473. [Google Scholar] [CrossRef] 
[4] Bai, G.Z., Wu, Z. and Lin, X. (2017) Intersecting Line of Conical Surface and Smoothly Blending of Two Tubes Whose Axes Are Non-Coplanar. Journal of Applied Mathematics and Physics, 5, 1887-1991. [Google Scholar] [CrossRef] 
[5] Bai, G.Z., Wang, H. and Yin, Z.J. (2014) Employing Generalized Bezier Tube to Smoothly Blending Tubes Whose Axes Are Non-Coplanar. Applied Mechanics and Materials, 513-517, 2301-2306. [Google Scholar] [CrossRef] 
[6] Bai, G.Z. and Wang, F. (2019) Application of Quasi-Cubic Bezier Curves in the Blending of Tubes with Different Radiuses. Materials Science and Engineering, Vol. 612, 1-7. [Google Scholar] [CrossRef] 
[7] 白根柱. 基于轴线光滑拼接的轴线异面管道拼接技术[J]. 应用数学进展, 2019, 8(7): 1267-1271.

为你推荐