碲化镉太阳电池弱光性能研究
Study on the Weak-Light Performance of Cadmium Telluride Solar Cells
DOI: 10.12677/MS.2020.109089, PDF,    科研立项经费支持
作者: 朱树盛, 李 阳*:五邑大学,应用物理与材料学院,广东 江门
关键词: 碲化镉太阳电池并联电阻弱光性能光强CdTe Shunt Resistance Weak Light Performance Light Intensity
摘要: 本文通过选择了三种不同并联电阻的CdTe太阳电池进行对比研究,研究发现随着光强的减弱,CdTe太阳电池的短路电流密度(JSC)、开路电压(VOC)、单位输出功率(Pout)和填充因子(FF)均降低。结果显示并联电阻越大的CdTe太阳电池,各性能参数衰减越慢。通过分析并联电阻随光强的变化情况,我们发现并联电阻值以近似幂函数的方式增大,并且我们认为主要是并联电阻影响CdTe太阳电池的弱光特性。
Abstract: In this paper, three CdTe solar cells with different shunt resistances were selected for comparative study. We found that as the light intensity decreased, the short-circuit current density (JSC), open circuit voltage (VOC), unit output power (Pout), and fill factor (FF) of CdTe solar cells all decreased. The results showed that the CdTe solar cells with larger shunt resistance have slower decay of performance parameters. By analyzing the change of the shunt resistance with the light intensity, we found that the shunt resistance value increased in a way that approximated a power function. In the end, we believe that the shunt resistance mainly affects the weak light characteristics of CdTe solar cells.
文章引用:朱树盛, 李阳. 碲化镉太阳电池弱光性能研究[J]. 材料科学, 2020, 10(9): 744-749. https://doi.org/10.12677/MS.2020.109089

参考文献

[1] Nasiri, A., Zabalawi, S.A. and Mandic, G. (2009) Indoor Power Harvesting Using Photovoltaic Cells for Low-Power Applications. IEEE Transactions on Industrial Electronics, 56, 4502-4509. [Google Scholar] [CrossRef
[2] Li, Q., et al. (2017) Comparative Study of GaAs and CdTe Solar Cell Performance under Low-Intensity Light Irradiance. Solar Energy, 157, 216-226. [Google Scholar] [CrossRef
[3] Venkatesan, S., et al. (2019) High-Efficiency Bifacial Dye-Sensitized Solar Cells for Application under Indoor Light Conditions. ACS Applied Materials & Interfaces, 11, 42780-42789. [Google Scholar] [CrossRef] [PubMed]
[4] Lee, H.K.H., et al. (2018) Organic Photovoltaic Cells-Promising Indoor Light Harvesters for Self-Sustainable Electronics. Journal of Materials Chemistry A, 6, 5618-5626. [Google Scholar] [CrossRef
[5] Dagar, J., et al. (2018) Highly Efficient Perovskite Solar Cells for Light Harvesting under Indoor Illumination via Solution Processed SnO2/MgO Composite Electron Transport Layers. Nano Energy, 49, 290-299. [Google Scholar] [CrossRef
[6] Kim, S., et al. (2019) Recent Progress in Solar Cell Technology for Low-Light Indoor Applications. Current Alternative Energy, 3, 3-17. [Google Scholar] [CrossRef
[7] Ma, L.-K., et al. (2020) High-Efficiency Indoor Or-ganic Photovoltaics with a Band-Aligned Interlayer. Joule. [Google Scholar] [CrossRef
[8] Britt, J. and Ferekides, C. (1993) Thin-Film CdS/CdTe Solar Cell with 15.8% Efficiency. Applied Physics Letters, 62, 2851-2852. [Google Scholar] [CrossRef
[9] Shen, K., et al. (2016) CdTe Solar Cell Performance under Low-Intensity Light Irradiance. Solar Energy Materials and Solar Cells, 144, 472-480. [Google Scholar] [CrossRef
[10] Wu, M.J., et al. (2019) Bandgap Engineering Enhances the Performance of Mixed-Cation Perovskite Materials for Indoor Photovoltaic Applications. Advanced Energy Materials, 9, Article ID: 1901863. [Google Scholar] [CrossRef
[11] Chen, F.-C. (2019) Emerging Organic and Organic/Inorganic Hy-brid Photovoltaic Devices for Specialty Applications: Low-Level-Lighting Energy Conversion and Biomedical Treatment. Advanced Optical Materials, 7, No. 1. [Google Scholar] [CrossRef