大型汽轮机转子的发展中裂纹对刚度的影响
Effect on the Stiffness of a Large Turbine Rotor with Developing Crack
摘要: 本文考虑了大型汽轮机转子在高转速时，裂纹转子系统存在裂纹生长的情况，研究了陀螺效应对于大型汽轮机转子发展中裂纹的刚度的影响，并针对发展中的裂纹，建立了相应裂纹转子系统的三维陀螺力矩模型和三维刚度模型。进一步研究了质量偏心距、质量偏心角和陀螺力矩对裂纹转子的刚度的影响，得到了裂纹转子系统在三维陀螺力矩、质量偏心和偏心角耦合作用下的高转速转子在裂纹发展的情况下的刚度变化规律。
Abstract: In this paper, the crack growth in the cracked rotor system of a large turbine rotor at high speed is considered, and this paper studies the influence of the gyro effect on the stiffness of a large steam turbine rotor with crack growth. For the developing cracks, the three-dimensional gyroscopic moment model and three-dimensional stiffness model of the corresponding cracked rotor system are formed. The coupling effects of mass eccentricity, unbalance angle and gyro moment on the stiffness of the heavy-duty rotor with damage evolution are studied respectively. The stiffness variation law of the high-speed rotor with three different types of cracks under the coupling of three- dimensional gyro moment, mass eccentricity and unbalance angle are obtained.
文章引用：韩嘉桢, 彭慧春. 大型汽轮机转子的发展中裂纹对刚度的影响[J]. 力学研究, 2020, 9(4): 159-167. https://doi.org/10.12677/IJM.2020.94019

参考文献

[1] 朱厚军, 郑艳平, 赵玫. 裂纹转子振动研究的现状与展望[J]. 汽轮机技术, 2001, 43(5): 257-261. http://dx.chinadoi.cn/10.3969/j.issn.1001-5884.2001.05.001
[2] Dimarogonas, A.D. (1996) Vibration of Cracked Structures: A State of the Art Review. Engineering Fracture Mechanics, 55, 831-857. [Google Scholar] [CrossRef] 
[3] Papadopoulos, C.A. (2008) The Strain Energy Release Approach for Modeling Cracks in Rotors: A State of the Art Review. Mechanical Systems and Signal Processing, 22, 763-789. [Google Scholar] [CrossRef] 
[4] 闻邦椿, 武新华, 丁千, 等. 故障旋转机械非线性动力学的理论与试验[M]. 北京: 科学出版社, 2004.
[5] 向玲, 高雪媛. 考虑非线性油膜力的裂纹转子动力学特性仿真[J]. 动力工程学报, 2017, 37(6): 454-460. http://dx.chinadoi.cn/10.3969/j.issn.1674-7607.2017.06.005
[6] Darpe, A.K., Gupta, K. and Chawla, A. (2004) Coupled Bending, Longitudinal and Torsional Vibrations of a Cracked Rotor. Journal of Sound and Vibration, 269, 33-60. [Google Scholar] [CrossRef] 
[7] 翟鹏程, 何青, 彭慧春. 横向裂纹深度和质量不平衡方向对转子振动影响的实验研究[J]. 电力科学与工程, 2016, 32(12): 32-37. http://dx.chinadoi.cn/10.3969/j.issn.16720792.2016.12.007
[8] 林言丽. 斜裂纹转子系统的动力学特性[D]: [博士学位论文]. 北京: 清华大学, 2009.
[9] 王永亮, 崔颖, 韩聿, 钟兢军. 具有柔性支承的刚性转子系统的动力学分析模型[J]. 大连海事大学学报, 2016, 42(4): 73-78. http://dx.chinadoi.cn/10.16411/j.cnki.issn1006-7736.2016.04.012
[10] Smith, D.M. (2003) The Motion of a Rotor Carried by a Flexible Shaft in Flexible Bearings. Proceedings of The Royal Society A, 142, 1933. [Google Scholar] [CrossRef] 
[11] 隋永枫, 吕和祥. 陀螺效应对转子横向振动的影响分析[J]. 计算力学学报, 2003, 20(6): 711-714. http://dx.chinadoi.cn/10.3969/j.issn.1007-4708.2003.06.011
[12] 钟一谔, 何衍宗, 王正. 转子动力学[M]. 北京: 清华大学出版社, 1987: 1-40．
[13] 孙虎儿, 苏飞, 陈勇, 刘维雄, 杨恩东. 基于陀螺效应转子动不平衡横向-轴向耦合振动分析[J]. 机械强度, 2014, 36(3): 325-329.
[14] Chu, X.X. and Wang, F.L. (2014) Analysis of Vibration Characteristics of a Cracked Rotor. Applied Mechanics and Materials, 620, 296-299. [Google Scholar] [CrossRef] 
[15] Tada, H., Paris, P.C. and Irwin, G.R. (1973) The Stress Analysis of Crack Handbook. Del Research Corporation, Hellertown.
[16] 蔡大文. 考虑陀螺力矩时轴的临界转速计算[J]. 西安工业大学学报, 1995(2): 120-125.
[17] 胡腾, 殷国富, 孙明楠. 基于离心力和陀螺力矩效应的“主轴-轴承”系统动力学特性研究[J]. 振动与冲击, 2014(8): 100-108. http://dx.chinadoi.cn/10.13465/j.cnki.jvs.2014.08.018

为你推荐