单螺杆膨胀机基元容积膨胀过程两相流模拟研究
Simulation Study on the Two-Phase Flow in the Expansion Process of Basic Element Volume of Single Screw Expander
DOI: 10.12677/MET.2021.102022, PDF,    国家自然科学基金支持
作者: 沈丽丽, 吴玉庭, 王 伟, 雷 标, 智瑞平：北京工业大学环境与生命学部，北京；传热强化与过程节能教育部重点实验室，北京；传热与能源利用北京市重点实验室，北京
关键词: 单螺杆膨胀机；膨胀过程；非稳态；变形网格技术；STAR-CCM+；Single Screw Expander； Expansion Process； Unsteady； Morphing Grid Technology； STAR-CCM+
摘要: 本文通过采用CFD数值模拟分析法研究单螺杆膨胀机基元容积膨胀过程油气两相流的非稳态流动特性。考虑到单螺杆空间三维曲面结构的复杂性以及要实现单螺杆膨胀机基元容积膨胀过程的实时变化，利用STAR-CCM+软件对三维计算模型进行网格划分并采用变形网格技术实现动态膨胀过程的模拟仿真。模拟结果得到单螺杆膨胀机膨胀过程工质压力和温度变化规律，获得基元容积内流场的压力、温度和油气两相分布云图，并深入分析润滑油对工质状态的作用规律。
Abstract: CFD simulation method has been used to investigate internal unsteady oil-gas two-phase flow characteristics of basic element volume of single screw expander during the expansion process. Due to the difficulty of three-dimension spacial curved surface of single screw structure and the real-time change of basic element volume of single screw expander during expansion process, the three-dimension computation model is meshed by using the STAR-CCM+ software and its morphing technology has been applied to simulate the dynamic two-phase flow of expansion process. The simulation results show that variation in the pressure and temperature of working fluid during the expander expansion process has been given, the cloudy chart of pressure, temperature and oil-gas two-phase distribution in the basic element volume has been obtained, and the effect of lubrication oil on the state of working fluid has been analyzed.
文章引用：沈丽丽, 吴玉庭, 王伟, 雷标, 智瑞平. 单螺杆膨胀机基元容积膨胀过程两相流模拟研究[J]. 机械工程与技术, 2021, 10(2): 188-199. https://doi.org/10.12677/MET.2021.102022

参考文献

[1] Pereira, E.L.L., Deschamps, C.J. and Ribas, F.A. (2008) Performance Analysis of Reciprocating Compressors through Computational Fluid Dynamics. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 222, 183-192. [Google Scholar] [CrossRef] 
[2] Tuhovcak, J., Hejcjk, J. and Jicha, M. (2015) Modelling Fluid Flow in a Reciprocating Compressor. EPJ Web of Conferences, 92, 5. [Google Scholar] [CrossRef] 
[3] Ding, H. and Gao, H.Y. (2014) 3D Transient CFD Model for a Rolling Piston Compressor with a Dynamic Reed Valve. International Compressor Engineering Conference, West Lafayette, 14-17 July 2014, Paper 2362.
[4] Liu, C.H. and Geng, W. (2004) Research on Suction Performance of Two-Cylinder Rolling Piston Type Rotary Compressors Based on CFD Simulation. 17th International Compressor Engineering Conference, West Lafayette, 12-15 July 2004, Paper C101.
[5] Chang, C.W., Chang, J.C., Hung, T.C. and Tseng, Y.S. (2013) CFD Simulation and Experiment of Scroll Expander for Organic Rankine Systems. Advanced Materials Research, 614-615, 515-519. [Google Scholar] [CrossRef] 
[6] 肖根福, 刘国平, 王俊亭, 等. 基于动网格的涡旋压缩机内部流场数值模拟[J]. 机床与液压, 2013, 41(1): 146-149.
[7] Spille-Kohoff, A. and Hesse, J. (2016) CFD Simulation of a Scroll Compressor Including Leakage Flows. International Rotating Equipment Conference, Compressor Users International Forum, Dusseldorf, 14-15 September 2016.
[8] Montenegro, G., Torre, A.D., Fiocco, M., Onorati, A., Benatzky, C. and Schlagar, G. (2014) CFD Simulation of a Sliding Vane Expander Operating inside a Small Scale ORC for Low Temperature Waste Heat Recovery. Sae Technical Papers, 1. [Google Scholar] [CrossRef] 
[9] Montenegro, G., Torre, A.D., Fiocco, M., Onorati, A., Benatzky, C. and Schlagar, G. (2014) Evaluating the Performance of a Rotary Vane Expander for Small Scale Organic Rankine Cycles Using CFD Tools. Energy Procedia, 45, 1136-1145. [Google Scholar] [CrossRef] 
[10] Bianchi, G., Rane, S., Kovacevic, A. and Cipollone, R. (2017) Grid Generation Methodology and CFD Simulations in Sliding Vane Compressors and Expanders. IOP Conference Series: Materials Science and Engineering, 232, Article ID: 012053. [Google Scholar] [CrossRef] 
[11] Kovacevic, A. (2005) Boundary Adaptation in Grid Gen-eration for CFD Analysis of Screw Compressors. International Journal for Numerical Methods in Engineering, 64, 401-426. [Google Scholar] [CrossRef] 
[12] Rane, S., Kovacevic, A., Stosic, N. and Kethidi, M. (2013) Grid Deformation Strategies for CFD Analysis of Screw Compressors. International Journal of Refrigeration, 36, 1883-1893. [Google Scholar] [CrossRef] 
[13] 董诚诚. 车载双螺杆压缩机流场分析及性能研究[D]: [博士学位论文]. 长沙: 中南大学, 2014.
[14] 何雪明, 施国江, 武美萍, 等. 双螺杆压缩机CFD分析新方法的研究与应用[J]. 机械科学与技术, 2018, 37(2): 211-219.
[15] Suman, A., Ziviani, D., Gabrielloni, J., Pinelli, M., Paepe, M.D. and Broek, M.V.D. (2016) Different Numerical Approaches for the Analysis of a Single Screw Expander. Energy Procedia, 101, 750-757. [Google Scholar] [CrossRef] 
[16] Ziviani, D., Suman, A., Gabrielloni, J., Pinelli, M., Paepe, M.D. and Broek, M.V.D. (2016) CFD Approaches Applied to a Single-Screw Expander. 23th International Compressor En-gineering Conference, West Lafayette, 11-14 July 2016, 1488.
[17] Casari, N., Fadiga, E., Pinelli, M., Suman, A. and Ziviani, D. (2020) Investigation of Flow Characteristics in a Single Screw Expander: A Numerical Approach. Energy, 213, Article ID: 118730. [Google Scholar] [CrossRef] 
[18] Xia, G.D., Liu, X.F., Zhai, Y.L. and Cui, Z.Z. (2014) Sin-gle-Phase and Two-Phase Flows through Helical Rectangular Channels in Single Screw Expander Prototype. Journal of Hydrodynamics Ser B, 26, 114-121. [Google Scholar] [CrossRef] 
[19] Cai, B. and Xia, G.D. (2016) An Experimental Study of the Flow Characteristics of Air-Water Two-Phase Flow in a Single Screw Channel. 9th International Conference on Mul-tiphase Flow, Firenze, 22-27 May 2016.
[20] Liu, X.F., Zhang, H., Wang, F., Xia, G.D. and Zhang, H. (2021) Numer-ical Investigation of Flow Behavior and Film Thickness in the Single Screw Expander. International Journal of Me-chanical Sciences, 190, Article ID: 106047. [Google Scholar] [CrossRef] 
[21] 辛电波, 冯健美, 贾晓晗, 等. 微小间隙内油气两相泄漏的试验研究[J]. 润滑与密封, 2008, 33(11): 4-8.

为你推荐