非晶变压器的磁致伸缩特性与振动噪声分析
Analysis of Magnetostrictive Characteristics and Vibration and Noise of Amorphous Transformer
摘要: 为了研究非晶合金变压器中的磁致伸缩特性，本文首先对非晶合金带材进行了磁特性与磁致伸缩特性的测量，建立了一个非晶合金磁致伸缩预测模型。然后在非晶合金的磁特性与磁致伸缩特性的测量数据的基础上，建立一个非晶合金变压器的有限元模型，并进行了多物理场分析。通过搭建不同频率下的非晶合金变压器的磁致伸缩测量实验，对不同频率下的磁特性与磁致伸缩特性进行分析，并根据测量结果建立非晶合金数值模型进行振动噪声分析。将测量结果与模型计算结果进行对比，论证了磁致伸缩预测模型的准确性。
Abstract: In order to study the magnetostrictive characteristics of amorphous alloy transformer, in this paper, the magnetic characteristics and magnetostrictive characteristics of amorphous alloy strip were measured firstly, and a prediction model for the magnetostrictive properties of amorphous alloy was established. Based on the measured data of magnetic and magnetostrictive characteristics of amorphous alloy, a finite element model of amorphous alloy transformer is established, and multi-physical field analysis is carried out. By building the magnetostrictive measurement experiments of amorphous alloy transformers at different frequencies, the magnetic characteristics and magnetostrictive characteristics at different frequencies were analyzed, and according to the measurement results, the numerical model of amorphous alloy was established for vibration and noise analysis. The accuracy of the magnetostriction prediction model is proved by comparing the measured results with the model calculation results.
文章引用：周晓雨, 沙瑞, 石永恒. 非晶变压器的磁致伸缩特性与振动噪声分析[J]. 电气工程, 2021, 9(2): 86-96. https://doi.org/10.12677/JEE.2021.92010

参考文献

[1] 武兰民, 程灵, 邱宁, 等. 配电变压器用非晶合金的研究进展及应用前景[J]. 热加工工艺, 2020, 49(12): 10-13.
[2] Olowu, T.O., Jafari, H., Moghaddami, M., et al. (2021) Multiphysics and Multiobjective Design Optimization of High-Frequency Transformers for Solid-State Transformer Applications. IEEE Transactions on Industry Applications, 57, 1014-1023. [Google Scholar] [CrossRef] 
[3] 李长云, 郝爱东, 娄禹. 直流偏磁条件下电力变压器振动特性研究进展[J]. 电力自动化设备, 2018, 38(6): 215-223.
[4] Zhu., L., Li, J., Yang, Q., et al. (2020) An Improved Magnetostriction Model for Electrical Steel Sheet Based on Jiles-Atherton Model. IEEE Transactions on Magnetics, 56, 1-4. [Google Scholar] [CrossRef] 
[5] 祝丽花, 李晶晶, 朱建国. 服役条件下取向硅钢磁致伸缩模型的研究[J]. 电工技术学报, 2020, 35(19): 4131-4138.
[6] 张鹏宁, 李琳, 程志光, 等. 并联电抗器与变压器模型铁心振动仿真与试验对比[J]. 电工技术学报, 2018, 33(22): 5273-5281.
[7] Mizuta, T., Tani, Y. and Fujiwara, K. (2018) Magnetic Property of Amorphous Magnetic Thin Ribbon and Its Laminated Bulk under Tensile and Compressive Stresses. IEEE Transactions on Magnetics, 54, 1-5. [Google Scholar] [CrossRef] 
[8] 韩天衡, 祝丽花, 沙瑞, 等. 温度对非晶合金卷形铁心磁特性及振动的影响分析[J]. 电工电能新技术, 2019, 38(11): 66-73.
[9] Liu, D., Li, J., Noubissi, R.K., et al. (2019) Magnetic Properties and Vibration Characteristics of Amorphous Alloy Strip and Its Combination. IET Electric Power Applications, 13, 1589-1597. [Google Scholar] [CrossRef] 
[10] Jiles, D.C. and Atherton, D.L. (1984) Theory of the Magnetisation Process in Ferromagnets and Its Application to the Magnetomechanical Effect. Journal of Physics D: Applied Physics, 17, 1265. [Google Scholar] [CrossRef] 
[11] Jiles, D.C. and Thoelke, J.B. (1992) Theory of Ferromagnetic Hysteresis: Determination of Model Parameters from Experimental Hysteresis Loops. IEEE Transactions on Magnetics, 5, 3928-3930. [Google Scholar] [CrossRef] 
[12] Annakkage, U.D., McLaren, P.G., Dirks, E., et al. (2000) A Current Transformer Model Based on the Jiles-Atherton Theory of Ferromagnetic Hysteresis. IEEE Transactions on Power Delivery, 15, 57-61. [Google Scholar] [CrossRef] 
[13] Kennedy, J. and Eberhart, R.C. (1995) Particle Swarm Optimization. IEEE International Conference on Neural Networks, Perth, Western Australia, 27 November-1 December 1995, 1942-1948. [Google Scholar] [CrossRef]