风机在线监测与诊断的应用设计
Application Design of Fan Online Monitoring and Diagnosis
摘要:
通过振动传感器对设备的运行状况进行在线监测,实时收集设备正常运行的振动值。振动值与旋转类振动信号采集标准对比,判断设备此时的运行状况。利用加速度传感器采集的时域波形,在系统上位机进行傅里叶变化转换成频域波形,结合机械故障的时频域基础理论判断设备的故障原因和故障部位。为旋转机械设备运行提供可靠的维修和运行建议。
Abstract:
Fans
use vibration sensors to monitor the operating status of the equipment online,
and collect the vibration values of the equipment during normal operation in
real time. The vibration value is compared with the rotation vibration signal
collection standard to determine the operating status of the equipment at this
time. The equipment collects the vibration signal using the time-domain waveform
collected by the acceleration sensor, and converts the Fourier change into the
frequency-domain waveform on the system host
computer, and combines the basic theory of the mechanical fault in the
time-frequency domain to determine the cause and location of the equipment
failure. Provide reliable maintenance and operation suggestions for the
operation of rotating machinery and equipment.
参考文献
|
[1]
|
苏鹏声, 王欢. 电力系统设备状态监测与故障诊断技术分析[J]. 电力系统自动化, 2003(1): 61-65+82.
|
|
[2]
|
王瑞闯, 林富洪. 风力发电机在线监测与诊断系统研究[J]. 华东电力, 2009, 37(1): 190-193.
|
|
[3]
|
王金福, 李富才. 机械故障诊断技术中的信号处理方法: 时域分析[J]. 噪声与振动控制, 2013, 33(2): 128-132.
|
|
[4]
|
孟涛. 齿轮与滚动轴承故障的振动分析与诊断[D]: [博士学位论文]. 西安: 西北工业大学, 2003.
|
|
[5]
|
何洋洋. 旋转机械振动故障诊断研究[D]: [硕士学位论文]. 北京: 华北电力大学, 2019.
|
|
[6]
|
杨一晴, 马宏伟, 樊红卫, 张超, 张勇强, 韩磊. 矿井主通风机振动在线监测与故障诊断系统[J]. 煤矿机械, 2019, 40(12): 161-163.
|
|
[7]
|
全国机械振动, 冲击与状态监测标准化技术委员会(SAC/TC 53). GB/T 6075.3-2011机械振动在非旋转部件上测量评价机器的振动第3部分: 额定功率大于15 kW额定转速在120 r/min至15,000 r/min之间的在现场测量的工业机器[S]. 2011.
|