基于Solidworks三维建模课程案例教学研究
Research on Case Teaching Based on Solidworks 3D Modeling Course
摘要:
Solidworks是一门比较综合的学科，要掌握该学科的分析思路需要一定的基础。然而现代对工程设计师要求进一步提高，很多工程应用单位缺少结构设计及分析相关人员。基于学生对工程设计软件CAD/CAM的熟练，借鉴CAD/CAM的案例教学经验，结合结构分析将Solidworks课程进行案例教学。在教学的过程中，以项目化教学为导向，配套相应的结构分析展开。通过实际案例使得不同层次的学生能更好地掌握机械结构的三维建模及分析。
Abstract:
Solidworks is a relatively comprehensive subject, and a certain foundation is needed to master the analytical thinking of this subject. However, modern requirements for engineering designers have further increased, and many engineering application units lack structural design and analysis related personnel. Based on students’ proficiency in engineering design software CAD/CAM, and learn from the case teaching experience of CAD/CAM, combined with structural analysis, Solidworks course is taught by case study. We take project-oriented teaching as the guidance, supporting the corresponding structural analysis to carry out teaching. Through actual cases, students at different levels can better master the three-dimensional modeling and analysis of mechanical structures.
参考文献
|
[1]
|
郑文昭. 试论案例教学法的应用[J]. 中国成人教育, 2006(11): 116-117.
|
|
[2]
|
熊敏, 仲梁维. 基于Solidworks的案例教学法在计算机辅助设计课程中的应用[J]. 软件导刊, 2012, 11(2): 166-168.
|
|
[3]
|
龚光军, 董玉德. 有限元法及CAE技术在现代机械工程中的应用探析[J]. 西安文理学院学报(自然科学版), 2017(20): 36-39.
|
|
[4]
|
周昌玉. 有限元分析的基本方法及工程应用[M]. 北京: 化学工业出版社, 2006.
|
|
[5]
|
徐浩, 沙刚刚, 李腾腾, 等. 基于二维连续小波变换与数据融合技术的逆有限元法-伪激励法结构损伤识别方法[J]. 复合材料学报, 2021, 38(10): 3565-3573.
|
|
[6]
|
周晨, 邢文华. 3D打印技术与有限元分析在脊柱侧凸矫形中的应用优势[J]. 中国组织工程研究, 2021, 25(12): 100-105.
|
|
[7]
|
陈洪磊, 刘增华, 李子明, 吴斌, 何存富. 有限单元法在超声导波检测技术中的应用[J]. 力学进展, 2020, 50(1): 315-362.
|
|
[8]
|
秦丹丹, 唐鑫鑫, 黄文竹. 具有变系数四阶抛物方程的B样条有限元法[J]. 吉林大学学报(理学版), 2020, 58(5): 80-86.
|
|
[9]
|
王国锋. CAE技术在汽车设计中的应用研究[J]. 时代汽车, 2020, 334(10): 98-99.
|
|
[10]
|
Wu, Y.H., Zhou, Y.S., Zhou, Z.Y., et al. (2018) An Advanced CAD/CAE Integration Method for the Generative Design of Face Gears. Advances in Engineering Software, 126, 90-99. [Google Scholar] [CrossRef]
|
|
[11]
|
Ma, Y., Niu, W.T., Luo, Z.J., et al. (2016) Static and Dy-namic Performance Evaluation of a 3-DOF Spindle Head Using CAD-CAE Integration Methodology. Robotics and Computer Integrated Manufacturing, 41, 1-12. [Google Scholar] [CrossRef]
|