超高阻隔膜进展评述
Review on the Development of Ultra-High Barrier Films
DOI: 10.12677/MS.2022.125051, PDF,    国家自然科学基金支持
作者: 陈星宇, 何柏桐, 贺 涛, 王江涌, 徐从康*：汕头大学半导体材料与器件研究中心，广东 汕头；汕头大学物理系，广东 汕头
关键词: 超高阻隔膜；合成工艺；当前应用；发展现状；Ultra-High Barrier Film； Synthesis Process； Current Application； Development Status
摘要: 随着柔性电子器件的高速发展，特别是有机发光二极管(OLED)和有机光电池(OPV)的商品化，极大推动了柔性封装超高阻隔膜的发展。本文从早期的阻隔膜到当前柔性超高阻隔膜的发展历程进行了评述，介绍了目前研发超高阻隔膜的设计原理和制备超高阻隔膜的工艺技术，并对已广泛应用于特殊包装领域的柔性超高阻隔的发展、应用方向及制备技术提出了展望。随着柔性电子产品的发展，必将对超高阻隔薄膜提出更高的要求，越来越多的研究成果和新型合成工艺将投入到市场中去。未来超高阻隔薄膜会在生产成本、工艺效率、阻隔性能方向上有新的突破。
Abstract: With the development of flexible electronic devices, especially organic light-emitting diodes (OLED) and organic photovoltaic cells (OPV), the demands in the field of high value-added continuously promote the development of ultra-high barrier films. This paper reviews the development process from the initial barrier film to the current ultra-high barrier film, briefly describes the design principle and preparation technology of the ultra-high barrier film at present, and expounds the development status, application direction and technical means of ultra-high barrier in detail for the application of special packaging fields. With the development of products in flexible electronics, the ultra-high barrier film will put forward higher requirements, and more and more scientific research outputs and new synthetic processes will be put into market. In the future, the ultra-high barrier films will have new breakthroughs in production cost, process efficiency and barrier performance.
文章引用：陈星宇, 何柏桐, 贺涛, 王江涌, 徐从康. 超高阻隔膜进展评述[J]. 材料科学, 2022, 12(5): 481-499. https://doi.org/10.12677/MS.2022.125051

参考文献

[1] Meyer, J., Catal, R. and Gavara, R. (2003) Structural Characteristics Defining High Barrier Polymericmaterials. Materials Science & Technology, 20, 1-7. [Google Scholar] [CrossRef] 
[2] Amberg-Schwab, S., Hoff-mann, M., Bader, H., et al. (1998) Inorganic-Organic Polymers with Barrier Properties for Water Vapor, Oxygen and Flavors. Journal of Sol-Gel Science and Technology, 13, 141-146. [Google Scholar] [CrossRef] 
[3] 吴常良, 李茜茜, 李丽, 等. 超高阻隔膜制备工艺现状及市场发展[J]. 真空科学与技术学报, 2014, 34(5): 543-548.
[4] Meyer, J., Görrn, P., Bertram, F., et al. (2009) Al2O3/ZrO2 Nanolaminates as Ultrahigh Gas-Diffusion Barriers—A Strategy for Reliable Encapsulation of Organic Electronics. Ad-vanced Materials, 21, 1845-1849. [Google Scholar] [CrossRef] 
[5] 程慰. 高阻隔膜材料研究进展[J]. 科技与企业, 2016(7): 230-231.
[6] Reddy, N.R., Armstrong, D.J., Rhodehamel, E.J., et al. (1991) Shelf-Life Extension and Safety Concerns about Fresh Fishery Products Packaged under Modified Atmospheres: A Review. Journal of Food Safety, 12, 87-118. [Google Scholar] [CrossRef] 
[7] 齐凤阳, 陈强, 刘福平. Roll-to-roll MPECVD中氧气浓度对氧化硅薄膜性能的影响[J]. 真空科学与技术学报, 2012, 32(9): 841-844.
[8] Lange, J. and Wyser, Y. (2003) Recent Innovations in Barrier Technologies for Plastic Packaging—A Review. Packaging Technology & Science, 16, 149-158. [Google Scholar] [CrossRef] 
[9] 谢小英. 精密涂布技术的发展状况[J]. 影像技术, 2017, 29(1): 4-7.
[10] Thellen, C., Schirmer, S., Ratto, J.A., et al. (2009) Co-Extrusion of Multilayer Poly(m-xylylene adip-imide) Nanocomposite Films for High Oxygen Barrier Packaging Applications. Journal of Membrane Science, 340, 45-51. [Google Scholar] [CrossRef] 
[11] Kotal, M., Thakur, A.K. and Bhowmick, A.K. (2013) Polyani-line-Carbon Nanofiber Composite by Chemical Grafting Approach and Its Supercapacitor Application. ACS Applied Ma-terials & Interfaces, 5, 8374-8386. [Google Scholar] [CrossRef] [PubMed]
[12] 李东升, 吕功煊. 制备导电聚合物-半导体纳米颗粒自组装膜[J]. 物理化学学报, 2001, 16(3): 252-256.
[13] Qi, Z.D., Saito, T., Fan, Y., et al. (2012) Multifunctional Coating Films by Layer-by-Layer Deposition of Cellulose and Chitin Nanofibril. Biomacromolecules, 13, 553-558. [Google Scholar] [CrossRef] [PubMed]
[14] Cui, Y.B., Kumar, S., Balakantha, K.R., et al. (2015) Gas Barrier Proper-ties of Polymer/Clay Nanocomposites. RSC Advances, 5, 63669-63690. [Google Scholar] [CrossRef] 
[15] 黄鸿宏, 黄洪填, 黄剑彬, 等. 真空镀膜综述[J]. 现代涂料与涂装, 2011, 14(6): 22-24.
[16] 顾春生. 真空镀膜在高阻隔性包装材料上的应用[J]. 塑料包装, 2014, 24(3): 31-35.
[17] 北京北仪创新真空技术有限责任公司, 沈阳真空技术研究所. 真空蒸发镀膜设备[S]. 北京: 机械工业出版社, 2004: 9 p.
[18] 陈素君, 陈月增. 真空蒸发镀膜设备性能的改进[J]. 真空, 2008, 45(6): 40-43.
[19] 牛燕辉. 化学气相沉积技术的研究与应用进展[J]. 科技风, 2020, 33(13): 161.
[20] 王豫, 水恒勇. 化学气相沉积制膜技术的应用与发展[J]. 热处理, 2001, 22(4): 1-4.
[21] 张菁. 化学气相沉积技术发展趋势[J]. 表面技术, 1996, 25(2): 1-58.
[22] 牛燕辉. 化学气相沉积技术的研究与应用进展[J]. 科技风, 2020, 33(13): 161.
[23] Gerald, L. (1996) Preparation of Device-Quality SiO2 Thin Films by Remote Plasma-Enhanced Chemical Vapour Deposition (PECVD): Applications in Metal-Oxide-Semiconductor (MOS) Devices. Advanced Materials for Optics & Electronics, 2, 55-72. [Google Scholar] [CrossRef] 
[24] Li, Y.S., Shimada, S., Kiyono, H., et al. (2006) Synthesis of Ti-Al-Si-N Nanocomposite Films Using Liquid Injection PECVD from Alkoxide Precursors. Acta Materialia, 54, 2041-2048. [Google Scholar] [CrossRef] 
[25] Jung, C.K., Dong, C.L., Mungi, P., et al. (2003) Hydrogenated Amorphous and Crystalline SiC Thin Films Grown by RF-PECVD and Thermal MOCVD, Comparative Study of Structural and Optical Properties. Surface and Coatings Technology, 171, 46-50. [Google Scholar] [CrossRef] 
[26] Mochalov, L., Kudryashov, M., Logunov, A., et al. (2017) Structural and Optical Properties of Arsenic Sulfide Films Synthesized by a Novel PECVD-Based Approach. Superlattices and Microstructures, 111, 1104-1112. [Google Scholar] [CrossRef] 
[27] Philippe, S., Céline, V., Agnès, G., et al. (2010) Growth and Modification of Organosilicon Films in PECVD and Remote Afterglow Reactors. Plasma Processes and Polymers, 3, 100-109. [Google Scholar] [CrossRef] 
[28] 徐汾丽, 周美丽, 陈强. 柔性高阻隔薄膜材料的研究现状[J]. 包装工程, 2017, 38(17): 70-76.
[29] 梁宁. 有机电致发光器件铟封接方法的研究[D]: [硕士学位论文]. 成都: 电子科技大学, 2012.
[30] Topolniak, I., Chapel, A., Gaume, J., et al. (2017) Applications of Polymer Nanocom-posites as Encapsulants for Solar Cells and LEDs: Impact of Photodegradation on Barrier and Optical Properties. Poly-mer Degradation and Stability, 145, 52-59. [Google Scholar] [CrossRef] 
[31] Lorenza, M., Nicole, M., Rutherford, R.J., et al. (2006) Barix Multilayer Barrier Technology for Organic Solar Cells. SPIE Pro-ceedings, Volume 6334, 63340M.
[32] Schulz, S.C. (2006) Multifunctional Multilayer Optical Film. US, US7151532 B2.
[33] Yan, M., Kim, T.W., Erlat, A.G., et al. (2005) A Transparent, High Barrier, and High Heat Substrate for Or-ganic Electronics. Proceedings of the IEEE, 93, 1468-1477. [Google Scholar] [CrossRef] 
[34] Lungenschmied, C., Dennler, G., Czeremuszkin, G., et al. (2006) Flexible Encapsulation for Organic Solar Cells. Proceedings of SPIE: The International Society for Optical Engi-neering, 6197, 1-8. [Google Scholar] [CrossRef] 
[35] Priolo, M.A., Holder, K.M., Guin, T., et al. (2015) Re-cent Advances in Gas Barrier Thin Films via Layer-by-Layer Assembly of Polymers and Platelets. Macromolecular Rapid Communications, 36, 866-879. [Google Scholar] [CrossRef] [PubMed]
[36] Falla, W.R., Mulski, M. and Cussler, E.L. (1996) Estimating Diffu-sion through Flake-Filled Membranes. Journal of Membrane Science, 119, 129-138. [Google Scholar] [CrossRef] 
[37] Erlat, A.G., Spontak, R.J., Clarke, R.P., et al. (1999) SiOx Gas Barrier Coatings on Polymer Substrates: Morphology and Gas Transport Considerations. The Journal of Physical Chemistry B, 103, 6047-6055. [Google Scholar] [CrossRef] 
[38] Weaver, M.S., Michalski, L.A., Rajan, K., et al. (2002) Organic Light-Emitting Devices with Extended Operating Lifetimes on Plastic Substrates. Applied Physics Letters, 81, 2929-2931. [Google Scholar] [CrossRef] 
[39] Affinito, J.D., Gross, M.E., Coronado, C.A., et al. (1996) A New Method for Fabricating Transparent Barrier Layers. Thin Solid Films, 290, 63-67. [Google Scholar] [CrossRef] 
[40] Hanika, M., Langowski, H.C. and Peukert, W. (2003) Simu-lation and Verification of Defect-Dominated Permeation Mechanisms in Multiple Structures of Inorganic and Polymeric Barrier Layers. Society of Vacuum Coaters 46th Annual Technical Conference, Garching, 592-599.
[41] Parhi, A., Tang, J. and Sablani, S.S. (2020) Functionality of Ultra-High Barrier Metal Oxide-Coated Polymer Films for In-Package, Thermally Sterilized Food Products. Food Packaging and Shelf Life, 25, Article ID: 100514. [Google Scholar] [CrossRef] 
[42] Zhou, S.Y., Yang, B., Li, Y., et al. (2017) Realization of Ul-tra-High Barrier to Water Vapor by 3D-Interconnection of Super-Hydrophobic Graphene Layers in Polylactide Films. Journal of Materials Chemistry A, 5, 14377-14386. [Google Scholar] [CrossRef] 
[43] Ammala, A., Pas, S.J., Lawrence, K.A., et al. (2008) Poly(m-xylene adipamide)-montmorillonite Nanocomposites: Effect of Organo-Modifier Structure on Free Volume and Oxygen Barrier Properties. Journal of Materials Chemistry, 18, 911-916. [Google Scholar] [CrossRef] 
[44] Phillips, R.W. (1990) Optically Variable Films, Pigments, and Inks. Proceedings of SPIE: The International Society for Optical Engi-neering, 1323, 98-109. [Google Scholar] [CrossRef] 
[45] Chehura, E., Jarzebinska, R., Costa, E., et al. (2015) Multiplexed Fibre Optic Sensors for Monitoring Resin Infusion, Flow and Cure in Composite Material Processing. Pro-ceedings of SPIE—The International Society for Optical Engineering, 6200, Article ID: 919005.
[46] 冯杰. 等. 离子体增强化学气相沉积中中性气体流动对容性耦合等离子体放电特性影响的研究[D]: [硕士学位论文]. 大连: 大连理工大学, 2012.
[47] Sťahel, P., Šíra, M., Navrátil, Z., et al. (2005) Plasma Treatment of Polymers to Improve Ad-hesion. Materials Engineering, 40, 139-174.
[48] Juneja, S. and Kumar, S. (2020) Effect of Power on Crystallinity and Opto-Electronic Properties of Silicon Thin Films Grown Using VHF PECVD Process. Silicon, 12, 1-14. [Google Scholar] [CrossRef] 
[49] Howling, A.A., Dorier, J.L., Hollenstein, C., et al. (1992) Fre-quency Effects in Silane Plasmas for Plasma Enhanced Chemical Vapor Deposition. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 10, 1080-1085. [Google Scholar] [CrossRef] 
[50] Puurunen, R.L. (2015) A Short History of Atomic Layer Deposition: Tuomo Suntola’s Atomic Layer Epitaxy. Chemical Vapor Deposition, 20, 332-344. [Google Scholar] [CrossRef] 
[51] 莫秋燕, 杨永亮. 原子层沉积技术在光学薄膜制备中的应用综述[J]. 科学技术创新, 2018, 21(7): 191-192.
[52] 刘新坤. 等离子体增强原子层沉积技术研究[D]: [硕士学位论文]. 上海: 东华大学, 2012.
[53] Profijt, H.B., Potts, S.E., Sanden, M.C., et al. (2011) Plasma-Assisted Atomic Layer Deposition: Basics, Opportunities, and Challenges. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, 29, Article ID: 050801. [Google Scholar] [CrossRef] 
[54] Longrie, D., Deduytsche, D. and Detavernier, C. (2014) Reactor Concepts for Atomic Layer Deposition on Agitated Particles: A Review. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 32, Article ID: 010802. [Google Scholar] [CrossRef] 
[55] Mccormick, J.A., Cloutier, B.L., Weimer, A.W., et al. (2007) Rotary Reac-tor for Atomic Layer Deposition on Large Quantities of Nanoparticles. Journal of Vacuum Science & Technology A Vac-uum Surfaces & Films, 25, 67-74. [Google Scholar] [CrossRef] 
[56] Paul, P., et al. (2012) Spatial Atomic Layer Deposition: A Route towards Further Industrialization of Atomic Layer Deposition. Journal of Vacuum Science & Technology, A. Vacuum, Surfaces, and Films, 30, Article ID: 010802. [Google Scholar] [CrossRef] 
[57] Duan, C.L., Liu, X., Shan, B., et al. (2015) Fluidized Bed Coupled Rotary Reactor for Nanoparticles Coating via Atomic Layer Deposition. Review of Scientific Instruments, 86, 3727. [Google Scholar] [CrossRef] [PubMed]
[58] 苗虎, 李刘合, 旷小聪. 原子层沉积技术发展概况[J]. 真空, 2018, 55(4): 51-58.
[59] Van, B.H., Wiggers, F.B., Gupta, A., et al. (2015) Initial Growth, Refractive Index, and Crystallinity of Thermal and Plasma-Enhanced Atomic Layer Deposition AlN Films. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 33, 01A111. [Google Scholar] [CrossRef] 
[60] Yoshimura, T., Tatsuura, S. and Sotoyama, W. (1991) Polymer Films Formed with Monolayer Growth Steps by Molecular Layer Deposition. Applied Physics Letters, 59, 482-484. [Google Scholar] [CrossRef] 
[61] Lee, B.H., Min, K.R., Choi, S.Y., et al. (2007) Rapid Vapor-Phase Fabrication of Organic-Inorganic Hybrid Superlattices with Monolayer Precision. Journal of the American Chemical Society, 129, 16034-16041. [Google Scholar] [CrossRef] [PubMed]
[62] Smirnov, V.M., Zemtsova, E.G., Belikov, A.A., et al. (2007) Chemical De-sign of Quasi-One-Dimensional Organoiron Nanostructures Fixed on an Inorganic Matrix and Study of Their Magnetic Properties. Doklady Physical Chemistry, 413, 95-98. [Google Scholar] [CrossRef] 
[63] Brown, J.J., Hall, R.A., Kladitis, P.E., et al. (2013) Molecular Layer Deposition on Carbon Nanotubes. ACS Nano, 7, 7812. [Google Scholar] [CrossRef] [PubMed]
[64] Klepper, K.B., Nilsen, O. and Fjellvg, H. (2010) Deposition of Thin Films of Organic-Inorganic Hybrid Materials Based on Aromatic Carboxylic Acids by Atomic Layer Deposition. Dalton Transactions, 39, 11628-11635. [Google Scholar] [CrossRef] [PubMed]
[65] Sundberg, P. and Karppinen, M. (2014) Organic and Inorganic-Organic Thin Film Structures by Molecular Layer Deposition: A Review. Beilstein Journal of Nanotechnology, 5, 1104-1136. [Google Scholar] [CrossRef] [PubMed]
[66] Liang, X., Yu, M., Li, J., et al. (2009) Ultra-Thin Mi-croporous-Mesoporous Metal Oxide Films Prepared by Molecular Layer Deposition (MLD). Chemical Communica-tions, 14, 7140-7142. [Google Scholar] [CrossRef] [PubMed]
[67] Seghete, D., Davidson, B.D., Hall, R.A., et al. (2009) Sacrificial Layers for Air Gaps in NEMS Using Alucone Molecular Layer Deposition. Sensors and Actuators A: Physi-cal, 155, 8-15. [Google Scholar] [CrossRef] 
[68] Kelly, P.J. and Arnell, R.D. (2000) Magnetron Sput-tering: A Review of Recent Developments and Applications. Vacuum, 56, 159-172. [Google Scholar] [CrossRef] 
[69] Aba, B., Fjgs, B., Jp, A., et al. (2018) On the Physical Va-pour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications. Procedia Manufac-turing, 17, 746-757. [Google Scholar] [CrossRef] 
[70] Depla, D., Strijckmans, K., Dulmaa, A., et al. (2019) Modeling Reactive Magnetron Sputtering: Opportunities and Challenges. Thin Solid Films, 688, Article ID: 137326. [Google Scholar] [CrossRef] 
[71] Wickersham, C.E., Poole, J.E. and Fan, J.S. (2002) Arc Generation from Sputtering Plasma-Dielectric Inclusion Interactions. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films, 20, 833-838. [Google Scholar] [CrossRef] 
[72] Juttner, B. (1987) Characterization of the Cathode Spot. IEEE Transactions on Plasma Science, 15, 474-480. [Google Scholar] [CrossRef] 
[73] Wickersham Jr., C., Poole, J.E., Fan, J.S., et al. (2001) Video Analysis of Inclusion Induced Macroparticle Emission from Aluminum Sputtering Targets. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 19, 2741-2750. [Google Scholar] [CrossRef] 
[74] Daalder, J.E. (1976) Components of Cathode Erosion in Vacuum Arcs. Journal of Physics D Applied Physics, 9, 2379. [Google Scholar] [CrossRef] 
[75] Morrison, N.A., Stolley, T., Hermanns, U., et al. (2015) An Overview of Process and Product Requirements for Next Generation Thin Film Electronics, Advanced Touch Panel De-vices, and Ultra High Barriers. Proceedings of the IEEE, 103, 518-534. [Google Scholar] [CrossRef] 
[76] Anders, A. (2006) Physics of Arcing, and Implications to Sputter Deposition. Thin Solid Films, 502, 22-28. [Google Scholar] [CrossRef] 
[77] Perez-Blanco, M., Hammons, J.R. and Danner, R.P. (2010) Meas-urement of the Solubility and Diffusivity of Blowing Agents in Polystyrene. Journal of Applied Polymer Science, 116, 2359-2365. [Google Scholar] [CrossRef] 
[78] Yang, Y.H., Malek, F.A. and Grunlan, J.C. (2010) Influence of Deposition Time on Layer-by-Layer Growth of Clay-Based Thin Films. Industrial & Engineering Chemistry Research, 49, 8501-8509. [Google Scholar] [CrossRef] 
[79] Priolo, M.A., Gamboa, D. and Grunlan, J.C. (2010) Transparent Clay-Polymer Nano Brick Wall Assemblies with Tailorable Oxygen Barrier. ACS Applied Materials & In-terfaces, 2, 312-320. [Google Scholar] [CrossRef] 
[80] Iler, R.K. (1966) Multilayers of Colloidal Particles. Journal of Colloid & Interface Science, 21, 569-594. [Google Scholar] [CrossRef] 
[81] Imai, N., Sekiguchi, M., Kano, M., et al. (1995) Evaporation Method of Forming Transparent Barrier Film. US, US5378506 A. 1995-01-03.
[82] Decher, G. and Hong, J.-D. (1991) Buildup of Ultrathin Multilayer Films by a Self-Assembly Process, 1 Consecutive Adsorption of Anionic and Cationic Bipolar Amphiphiles on Charged Surfaces. Makromolekulare Chemie. Macromolecular Symposia, 46, 321-327. [Google Scholar] [CrossRef] 
[83] Decher, G. and Hong, J.D. (1991) Buildup of Ultrathin Multilayer Films by a Self-Assembly Process: I. Consecutive Adsorption of Anionic and Cationic Bipolar Amphiphiles and Poly-electrolytes on Charged Surfaces. Berichte der Bunsengesellschaft für physikalische Chemie, 95, 1430-1434. [Google Scholar] [CrossRef] 
[84] Keller, S.W., Johnson, S.A., Brigham, E.S., et al. (1995) Photoin-duced Charge Separation in Multilayer Thin Films Grown by Sequential Adsorption of Polyelectrolytes. Journal of the American Chemical Society, 117, 12879-12880. [Google Scholar] [CrossRef] 
[85] Dou, Y., Pan, T., Xu, S., et al. (2015) Transparent, Ultra-high-Gas-Barrier Films with a Brick-Mortar-Sand Structure. Angewandte Chemie International Edition, 127, 9809-9814. [Google Scholar] [CrossRef] 
[86] Lewis, J.S. and Weaver, M.S. (2004) Thin-Film Permeation-Barrier Technology for Flexible Organic Light-Emitting Devices. IEEE Journal of Selected Topics in Quantum Electronics, 10, 45-57. [Google Scholar] [CrossRef] 
[87] Wong, W. and Salleo, A. (2009) Flexible Electronics: Materials and Applications. Springer Publishing Company, Incorporated, Berlin, 215-256. [Google Scholar] [CrossRef] 
[88] Fahlteich, J., Steiner, C., Schiller, N., et al. (2016) Roll-to-Roll Thin Film Coating on Fluoropolymer Webs—Status, Challenges and Applications. Surface & Coatings Technology, 314, 160-168.
[89] Chen, G.X., Weng, Y.L., Sun, F., et al. (2019) Low-Temperature Atomic Layer Deposition of Al2O3/Alucone Nanolaminates for OLED Encapsulation. RSC Advances, 9, 20884-20891. [Google Scholar] [CrossRef] 
[90] Kwon, J.H., Jeon, Y., Kim, D.-G., et al. (2019) Low-Temperature and Corrosion-Resistant Gas Diffusion Multibarrier with UV and Heat Rejection Capability—A Strategy to Ensure Reliabil-ity of Organic Electronics. ACS Applied Materials & Interfaces, 11, 16776-16784. [Google Scholar] [CrossRef] [PubMed]
[91] Jeong, E.G., Kwon, S., Han, J.H., et al. (2017) A Mechanically En-hanced Hybrid Nano-Stratified Barrier with a Defect Suppression Mechanism for Highly Reliable Flexible OLEDs. Na-noscale, 9, 6370-6379. [Google Scholar] [CrossRef] 
[92] Yang, D.Y., Lee, S.-M., Jang, W.J., et al. (2014) Flexible Organic Light-Emitting Diodes with ZnS/Ag/ZnO/Ag/WO3 Multilayer Electrode as a Transparent Anode. Organic Electronics, 15, 2468-2475. [Google Scholar] [CrossRef] 
[93] Liu, X., Cai, X., Mao, J., et al. (2001) ZnS/Ag/ZnS Nano-Multilayer Films for Transparent Electrodes in Flat Display Application. Applied Surface Science, 183, 103-110. [Google Scholar] [CrossRef] 
[94] Han, Y.C., Jang, C., Kim, K., et al. (2011) The Encapsulation of an Organic Light-Emitting Diode Using Organic-Inorganic Hybrid Materials and MgO. Organic Electronics, 12, 609-613. [Google Scholar] [CrossRef] 
[95] Han, J.H., Kim, D.-Y., Kim, D., et al. (2016) Highly Conductive and Flexible Color Filter Electrode Using Multilayer Film Structure. Scientific Reports, 6, Article No. 29341. [Google Scholar] [CrossRef] [PubMed]
[96] Jeong, H.K., Seungyeop, C., Yong, M.J., et al. (2017) Functional Design of Dielectric-Metal-Dielectric-Based Thin-Film Encapsulation with Heat Transfer and Flexibility for Flexible Displays. ACS Applied Materials & Interfaces, 9, 27062-27072. [Google Scholar] [CrossRef] [PubMed]
[97] George, S.M. (2010) Atomic Layer Deposition: An Overview. Chemical Reviews, 110, 111-131. [Google Scholar] [CrossRef] [PubMed]
[98] Meyer, J., Schmidt, H., Kowalsky, W., et al. (2010) The Origin of Low Water Vapor Transmission Rates through Al2O3/ZrO2 Nanolaminate Gas-Diffusion Barriers Grown by Atomic Layer Deposition. Applied Physics Letters, 96, 117. [Google Scholar] [CrossRef] 
[99] Kim, L.H., Kim, K., Park, S., et al. (2014) Al2O3/TiO2 Nanolaminate Thin Film Encapsulation for Organic Thin Film Transistors via Plasma-Enhanced Atomic Layer Deposition. ACS Applied Materials & Interfaces, 6, 6731-6738. [Google Scholar] [CrossRef] [PubMed]
[100] Behrendt, A., Meyer, J., van de Weijer, P., et al. (2016) Stress Manage-ment in Thin-Film Gas-Permeation Barriers. ACS Applied Materials & Interfaces, 8, 4056. [Google Scholar] [CrossRef] [PubMed]
[101] Yoon, K.H., Kim, H.S., Han, K.S., et al. (2017) Extremely High Bar-rier Performance of Organic-Inorganic Nanolaminated Thin Films for Organic Light-Emitting Diodes. ACS Applied Ma-terials & Interfaces, 9, 5399-5408. [Google Scholar] [CrossRef] [PubMed]
[102] Wang, X., Li, Y., Lin, J., et al. (2017) Modular Injector Integrated Linear Apparatus with Motion Profile Optimization for Spatial Atomic Layer Deposition. Review of Scientific Instru-ments, 88, Article ID: 115108. [Google Scholar] [CrossRef] [PubMed]
[103] Tang, J.M. (2015) Unlocking Potentials of Microwaves for Food Safety and Quality. Journal of Food Science, 80, 1776-1793. [Google Scholar] [CrossRef] [PubMed]
[104] Patel, J., Al-Ghamdi, S., Zhang, H., et al. (2019) Determining Shelf Life of Ready-to-Eat Macaroni and Cheese in High Barrier and Oxygen Scavenger Packaging Sterilized via Microwave-Assisted Thermal Sterilization. Food and Bioprocess Tech-nology, 12, 1516-1526. [Google Scholar] [CrossRef] 
[105] 曹华, 刘全校, 曹国荣, 等. 环保型高阻隔包装材料的制备及国内的研究进展[J]. 北京印刷学院学报, 2008, 29(4): 21-27.
[106] 向贤伟, 黄杰. 高阻隔材料的研究进展及其在军品包装中的应用[J]. 广州化工, 2016, 44(14): 35-90.
[107] Yuan, J., Zhang, Y.Q., Zhou, L.Y., et al. (2019) Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Elec-tron-Deficient Core. Joule, 3, 1140-1151. [Google Scholar] [CrossRef] 
[108] Meng, L., Zhang, Y., Wan, X., et al. (2018) Organic and Solution-Processed Tandem Solar Cells with 17.3% Efficiency. Science, 361, 1094-1098. [Google Scholar] [CrossRef] [PubMed]
[109] JøRgensen, M., Norrman, K. and Krebs, F.C. (2008) Sta-bility/Degradation of Polymer Solar Cells. Solar Energy Materials & Solar Cells, 92, 686-714. [Google Scholar] [CrossRef] 
[110] Jrgensen, M., Norrman, K., Gevorgyan, S.A., et al. (2012) Sta-bility of Polymer Solar Cells. Advanced Materials, 24, 580-612. [Google Scholar] [CrossRef] [PubMed]
[111] Suren, A., et al. (2013) Interlaboratory Outdoor Stability Studies of Flexible Roll-To-Roll Coated Organic Photovoltaic Modules: Stability over 10,000 h. Solar Energy Materials and Solar Cells, 116, 187-196. [Google Scholar] [CrossRef] 
[112] Vitali, C., et al. (2012) Cohesion and Device Reliability in Or-ganic Bulk Heterojunction Photovoltaic Cells. Solar Energy Materials and Solar Cells, 99, 182-189. [Google Scholar] [CrossRef] 
[113] Klumbies, H., Karl, M., Hermenau, M., et al. (2014) Water In-gress into and Climate Dependent Lifetime of Organic Photovoltaic Cells Investigated by Calcium Corrosion Tests. Solar Energy Materials & Solar Cells, 120, 685-690. [Google Scholar] [CrossRef] 
[114] Burrows, P.E., Graff, G.L., Gross, M.E., et al. (2001) Gas Per-meation and Lifetime Tests on Polymer-Based Barrier Coatings. Proceedings of SPIE: The International Society for Op-tical Engineering, 4105, 75-83. [Google Scholar] [CrossRef] 
[115] Cros, S., Bettignies, R.D., Berson, S., et al. (2011) Definition of Encapsu-lation Barrier Requirements: A Method Applied to Organic Solar Cells. Solar Energy Materials and Solar Cells, 95, 65-69. [Google Scholar] [CrossRef] 
[116] Chen, C.M., Chung, M.H., Hsieh, T.E., et al. (2008) Synthesis, Thermal Characterization, and Gas Barrier Properties of UV Curable Organic/Inorganic Hybrid Nanocomposites with Metal Alloys and Their Application for Encapsulation of Organic Solar Cells. Composites Science & Technology, 68, 3041-3046. [Google Scholar] [CrossRef] 
[117] Seethamraju, S., Rao, A.D., Ramamurthy, P.C., et al. (2014) Layer-by-Layer Assembly of Nafion on Surlyn with Ultrahigh Water Vapor Barrier. Langmuir, 30, 14606-14611. [Google Scholar] [CrossRef] [PubMed]
[118] Weerasinghe, H.C., et al. (2015) Influence of Moisture Out-Gassing from Encapsulant Materials on the Lifetime of Organic Solar Cells. Solar Energy Materials and Solar Cells, 132, 485-491. [Google Scholar] [CrossRef] 
[119] Gaume, J., Taviot-Gueho, C., Stéphane, C., et al. (2012) Opti-mization of PVA Clay Nanocomposite for Ultra-Barrier Multilayer Encapsulation of Organic Solar Cells. Solar Energy Materials & Solar Cells, 99, 240-249. [Google Scholar] [CrossRef] 
[120] Spee, D., Werf, K.V.D., Rath, J., et al. (2012) Excellent Organ-ic/Inorganic Transparent Thin Film Moisture Barrier Entirely Made by Hot Wire CVD at 100 ˚C. Physica Status Solidi (RRL)—Rapid Research Letters, 6, 151-153. [Google Scholar] [CrossRef] 
[121] Li, Y.-S., Tsai, C.-H., Kao, S.-H., et al. (2013) Single-Layer Organ-ic-Inorganic-Hybrid Thin-Film Encapsulation for Organic Solar Cells. Journal of Physics D—Applied Physics, 46, 5502. [Google Scholar] [CrossRef] 
[122] Chen, T.N., Wu, D.S., Wu, C.C., et al. (2006) High-Performance Transparent Barrier Films of SiO[sub x]/SiN[sub x] Stacks on Flexible Polymer Substrates. Journal of the Electrochemical Society, 153, F244-F248. [Google Scholar] [CrossRef] 

为你推荐