宽带功率放大器的ADS仿真与设计研究
ADS Simulation and Design of Broadband Power Amplifier
DOI: 10.12677/HJWC.2022.124004, PDF,   
作者: 刘宁川, 彭 宇, 刘宏杰:中原电子集团有限公司研发三所,湖北 武汉;纪晓辉:中国电子产业工程有限公司,北京
关键词: 宽带功率放大器ADS仿真Broad Band Power Amplifier ADS Simulation
摘要: 随着军事通信的不断深入发展,现代军用通信系统正朝着大容量、宽频带、高频谱利用率的方向发展。宽带通信势必会成为未来军事通信的发展主流。本文对宽带功率放大器的选型、设计进行了详细分析和基于ADS仿真软件进行仿真,对宽带功率放大器设计具有很强的工程理论指导意义。
Abstract: With the continuous development of military communication, modern military communication system is developing towards the direction of large capacity, broadband and high frequency spectrum utilization. Broadband communication is bound to become the mainstream of future military communication. In this paper, the selection and design of broadband power amplifier are analyzed in detail and simulated based on ADS simulation software, which has a strong engineering theoretical guiding significance for the design of broadband power amplifier.
文章引用:刘宁川, 彭宇, 纪晓辉, 刘宏杰. 宽带功率放大器的ADS仿真与设计研究[J]. 无线通信, 2022, 12(4): 27-34. https://doi.org/10.12677/HJWC.2022.124004

参考文献

[1] Inder J. Bahl. 射频与微波晶体管放大器基础[M]. 鲍景富, 孙玲玲, 等, 译. 北京: 电子工业出版社, 2013.
[2] 赵夕彬. 射频宽带大功率放大器模块[J]. 半导体技术, 2015, 28(2): 65-67.
[3] 陈艳华, 等. ADS应用详解[M]. 北京: 人民邮电出版社, 2019.
[4] 张哲. 基于GaN芯片的S波段宽带功率放大器的设计[D]: [硕士学位论文]. 成都: 电子科技大学, 2018.
[5] Amiri, E., Joodaki, M., Forouzanfer, M., et al. (2020) A Distributed Power Amplifier Design with a High Power Gain. 2020 28th Iranian Conference on Electrical Engineering (ICEE), Tabriz, 4-6 August 2020, 1-4.
[6] Qiu, Y.J., Xu, Y.H., Xu, R.M., et al. (2013) Compact Hybrid Broadband GaN HEMT Power Amplifier Based on Feedback Technique. Electronics Letters, 49, 372-374.
[Google Scholar] [CrossRef
[7] Meng, X., Yu, C., Liu, Y., et al. (2017) Design Approach for Implementation of Class-J Broadband Power Amplifiers Using Synthesized Band-Pass and Low-Pass Matching Topology. IEEE Transactions on Microwave Theory and Techniques, 65, 4984-4996.
[Google Scholar] [CrossRef
[8] 清华大学《微带电路》编写组. 微带电路[M]. 北京: 清华大学出版社, 2017: 108-183.
[9] 刘茂林, 王斌, 李冉, 等. 基于阶梯阻抗变换器的宽带功率放大器设计[J]. 电子元件与材料, 2021, 40(5): 479-484.