常见的固态电解质在锂硫电池中的相关应用
Related Applications of Solid-State Electrolytes in Lithium-Sulfur Batteries
摘要: 近年来，随着经济的迅猛发展便携式电子产品在全球范围内逐渐普及，锂硫电池由于其具有价格低廉，环境友好，能量密度高的特点，成为了锂离子电池之后的高性能电源。随着人们对锂硫电池的不断深入研究，人们发现其实现商业化仍然困难重重。影响锂硫电池性能的主要是多硫化物的穿梭效应、绝缘性以及在充放电过程中的体积膨胀，同时目前大部分的锂硫电池使用液体电解液导致充放电过程中产生的多硫化物溶解的问题迟迟未能解决，针对这个问题本文重点综述了新型固态电解质的锂硫电池设计以及相关的研究进展，最后总结了未来锂硫电池固态电解质的发展方向。
Abstract: In recent years, with the rapid development of the economy, portable electronic products are gradually popular around the world. Lithium-sulfur batteries have become the high-performance power source after lithium-ion batteries because of their low price, environment friendly and high energy density. With the continuous in-depth research of lithium sulfur batteries, it is found that it is still difficult to achieve commercialization. The main factors affecting the performance of lithi-um-sulfur batteries are the shuttle effect of polysulfide, insulation and volume expansion in the process of charging and discharging. At the same time, most of the current lithium-sulfur batteries use liquid electrolyte, resulting in the dissolution of polysulfide in the process of charging and dis-charging, which has not been solved. In order to solve this problem, this paper mainly reviews the design and related research progress of lithium-sulfur battery with new solid electrolyte. Finally, the future development direction of solid electrolytes for lithium-sulfur batteries is summarized.
文章引用：高浩琦, 原焕敏. 常见的固态电解质在锂硫电池中的相关应用[J]. 分析化学进展, 2022, 12(4): 341-352. https://doi.org/10.12677/AAC.2022.124041

参考文献

[1] Dunn, B., Kamath, H. and Tarascon, J.M. (2011) Electrical Energy Storage for the Grid: A Battery of Choices. Science, 334, 928-935.
[Google Scholar] [CrossRef] [PubMed]
[2] Garay-Marín, J.D., Quiroga-González, E. and Garza-Tovar, L.L. (2020) Two Cathodes in One for Lithium-Ion Batteries: Voltammetric Study of a Composite Cathode of Sulfur and LiFePO4. ChemistrySelect, 5, 6172-6177.
[Google Scholar] [CrossRef] 
[3] Ning, J., Yu, H., Mei, S., et al. (2022) Constructing Binder- and Carbon Additive-Free Organosulfur Cathodes Based on Conducting Thiol-Polymers through Electropolymerization for Lithium-Sulfur Batteries. ChemSusChem, 15, e202200434.
[Google Scholar] [CrossRef] [PubMed]
[4] Lei, D., Shi, K., Ye, H., et al. (2018) Progress and Perspective of Solid-State Lithium-Sulfur Batteries. Advanced Functional Materials, 28, Article No. 1707570.
[Google Scholar] [CrossRef] 
[5] Yuan, H., Nan, H.X., Zhao, C.Z., et al. (2020) Slurry-Coated Sulfur/Sulfide Cathode with Li Metal Anode for All-Solid-State Lithium-Sulfur Pouch Cells. Batteries & Supercaps, 3, 596-603.
[Google Scholar] [CrossRef] 
[6] Hao, H., Hutter, T., Boyce, B.L., et al. (2022) Review of Multi-functional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal-Sulfur and Selenium Batteries. Chemical Reviews, 122, 8053-8125.
[Google Scholar] [CrossRef] [PubMed]
[7] Deng, R., Wang, M., Yu, H., et al. (2022) Recent Advances and Applications toward Emerging Lithium-Sulfur Batteries: Working Principles and Opportunities. Energy & En-vironmental Materials, 5, 777-799.
[Google Scholar] [CrossRef] 
[8] Xiao, Y., Han, B., Zeng, Y., et al. (2020) New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling. Advanced Energy Materials, 10, Article No. 1903937.
[Google Scholar] [CrossRef] 
[9] He, Y., Chang, Z., Wu, S., et al. (2018) Simultane-ously Inhibiting Lithium Dendrites Growth and Polysulfides Shuttle by a Flexible MOF-Based Membrane in Li-S Batteries. Advanced Energy Materials, 8, Article No. 1802130.
[Google Scholar] [CrossRef] 
[10] Jiang, S., Lu, Y., Lu, Y., et al. (2018) Nafion/Titanium Diox-ide-Coated Lithium Anode for Stable Lithium-Sulfur Batteries. Chemistry—An Asian Journal, 13, 1379-1385.
[Google Scholar] [CrossRef] [PubMed]
[11] Wang, W., Wang, D., Wang, G., et al. (2020) Elastic, Conductive Coating Layer for Self-Standing Sulfur Cathode Achieving Long Lifespan Li-S Batteries. Advanced Energy Mate-rials, 10, Article No. 1904026.
[Google Scholar] [CrossRef] 
[12] Liu, J., Zhu, M., Shen, Z., et al. (2021) A Polysulfides-Confined All-in-One Porous Microcapsule Lithium-Sulfur Battery Cathode. Small, 17, Article No. 2103051.
[Google Scholar] [CrossRef] [PubMed]
[13] Tong, Z., Huang, L., Lei, W., Zhang, H. and Zhan, S. (2021) Carbon-Containing Electrospun Nanofibers for Lithium-Sulfur Battery: Current Status and Future Directions. Journal of Energy Chemistry, 54, 254-273.
[Google Scholar] [CrossRef] 
[14] Bhargav, A., He, J., Gupta, A. and Manthiram, A. (2020) Lithium-Sulfur Batteries: Attaining the Critical Metrics. Joule, 4, 285-291.
[Google Scholar] [CrossRef] 
[15] Wahyudi, W., Cao, Z., Kumar, P., et al. (2018) Phase Inver-sion Strategy to Flexible Freestanding Electrode: Critical Coupling of Binders and Electrolytes for High Performance Li-S Battery. Advanced Functional Materials, 28, Article No. 1802244.
[Google Scholar] [CrossRef] 
[16] Ng, S.F., Lau, M.Y.L. and Ong, W.J. (2021) Lithium-Sulfur Battery Cathode Design: Tailoring Metal-Based Nanostructures for Robust Polysulfide Adsorption and Catalytic Conversion. Advanced Materials, 33, Article No. 2008654.
[Google Scholar] [CrossRef] [PubMed]
[17] Chen, F., Zhang, Y., Hu, Q., et al. (2021) S/MWCNt/LLZO Composite Electrode With e−/S/Li+ Conductive Network for All-Solid-State Lithium-Sulfur Batteries. Journal of Solid State Chemistry, 301, Article ID: 122341.
[Google Scholar] [CrossRef] 
[18] Han, L., Li, Y., Yang, Y., et al. (2022) Zwitterionic Covalent Organic Framework as a Multifunctional Sulfur Host toward Durable Lithium-Sulfur Batteries. Journal of Colloid and Interface Science, 628, 144-153.
[Google Scholar] [CrossRef] [PubMed]
[19] Deng, N., Ticha, E.B., Wang, L., et al. (2019) Physical Inhibi-tion and Chemical Confinement of Lithium Polysulfides by Designing a Double-Layer Composite Separator for Lithium-Sulfur Battery. ChemElectroChem, 6, 4817-4830.
[Google Scholar] [CrossRef] 
[20] Liu, L., Zhang, D., et al. (2022) Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries. ACS Applied Energy Materials, 5, 2484-2494.
[Google Scholar] [CrossRef] 
[21] Ghosh, A., Shukla, S., Khosla, G.S., Lochab, B. and Mitra, S. (2016) Sustainable Sulfur-Rich Copolymer/Graphene Composite as Lithium-Sulfur Battery Cathode with Excellent Electrochemical Performance. Scientific Reports, 6, Article No. 25207.
[Google Scholar] [CrossRef] [PubMed]
[22] Li, X., Banis, M., Lushington, A., et al. (2018) A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides via Solid-Phase Lithium-Sulfur Transformation. Nature Communications, 9, Article No. 4509.
[Google Scholar] [CrossRef] [PubMed]
[23] Eshetu, G.G., Judez, X., Li, C., et al. (2017) Lithium Azide as an Electrolyte Additive for All-Solid-State Lithium-Sulfur Batteries. Angewandte Chemie International Edition, 56, 15368-15372.
[Google Scholar] [CrossRef] [PubMed]
[24] Sun, S., Xia, Q., Liu, J, et al. (2019) Self-Standing Oxy-gen-Deficient α-MoO3-x Nanoflake Arrays as 3D Cathode for Advanced All-Solid-State Thin Film Lithium Batteries. Journal of Materiomics, 5, 229-236.
[Google Scholar] [CrossRef] 
[25] Weiss, M., Simon, F.J., Busche, M.R., et al. (2020) From Liquid-to Solid-State Batteries: Ion Transfer Kinetics of Heteroionic Interfaces. Electrochemical Energy Reviews, 3, 221-238.
[Google Scholar] [CrossRef] 
[26] Xu, H., Yu, Y., Wang, Z. and Shao, G. (2019) First Principle Material Genome Approach for All Solid-State Batteries. Energy & Environmental Materials, 2, 234-250.
[Google Scholar] [CrossRef] 
[27] Goodenough, J.B. (2003) Oxide-Ion Electrolytes. Annual Review of Materials Research, 33, 91-128.
[Google Scholar] [CrossRef] 
[28] Sing, C.E., Zwanikken, J.W. and Olvera de La Cruz, M. (2014) Electrostatic Control of Block Copolymer Morphology. Nature Materials, 13, 694-698.
[Google Scholar] [CrossRef] [PubMed]
[29] Gadjourova, Z., Andreev, Y.G., Tunstall, D.P. and Bruce, P.G. (2001) Ionic Conductivity in Crystalline Polymer Electrolytes. Nature, 412, 520-523.
[Google Scholar] [CrossRef] [PubMed]
[30] Lv, R., Kou, W., Guo, S., et al. (2022) Preparing Two-Dimensional Ordered Li0.33La0.557TiO3 Crystal in Interlayer Channel of Thin Laminar Inorganic Solid-State Electrolyte towards Ultrafast Li+ Transfer. Angewandte Chemie International Edition, 61, e202114220.
[Google Scholar] [CrossRef] [PubMed]
[31] Zhao, Q., Liu, X., Stalin, S., Khan, K. and Archer, L.A. (2019) Solid-State Polymer Electrolytes with In-Built Fast Interfacial Transport for Secondary Lithium Batteries. Nature Energy, 4, 365-373.
[Google Scholar] [CrossRef] 
[32] Zhou, W., Wang, S., Li, Y., et al. (2016) Plating a Den-drite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte. Journal of the American Chemical Society, 138, 9385-9388.
[Google Scholar] [CrossRef] [PubMed]
[33] Chen, X., Cao, T., Xue, M., et al. (2018) Improved Room Temper-ature Ionic Conductivity of Ta and Ca Doped Li7La3Zr2O12 via a Modified Solution Method. Solid State Ionics, 314, 92-97.
[Google Scholar] [CrossRef] 
[34] Kaiser, N., Spannenberger, S., Schmitt, M., et al. (2018) Ion Transport Limitations in All-Solid-State Lithium Battery Electrodes Containing a Sulfide-Based Electrolyte. Journal of Power Sources, 396, 175-181.
[Google Scholar] [CrossRef] 
[35] Gür, T.M. (2018) Review of Electrical Energy Storage Technologies, Materials and Systems: Challenges and Prospects for Large-Scale Grid Storage. Energy & Environ-mental Science, 11, 2696-2767.
[Google Scholar] [CrossRef] 
[36] Yan, X., Li, Z., Wen, Z. and Han, W. (2017) Li/Li7La3Zr2O12/LiFePO4 All-Solid-State Battery with Ultrathin Nanoscale Solid Electrolyte. The Journal of Physical Chemistry C, 121, 1431-1435.
[Google Scholar] [CrossRef] 
[37] Manthiram, A., Yu, X. and Wang, S. (2017) Lithium Battery Chemistries Enabled by Solid-State Electrolytes. Nature Reviews Materials, 2, Article No. 16103.
[Google Scholar] [CrossRef] 
[38] Xu, S., McOwen, D.W., Zhang, L., et al. (2018) All-in-One Lithium-Sulfur Battery Enabled by a Porous-Dense-Porous Garnet Architecture. Energy Storage Materials, 15, 458-464.
[Google Scholar] [CrossRef] 
[39] AbdelHamid, A.A., Cheong, J.L. and Ying, J.Y. (2020) Li7La3Zr2O12 Sheet-Based Framework for High-Performance Lithium-Sulfur Hybrid Quasi-Solid Battery. Nano Energy, 71, Article ID: 104633.
[Google Scholar] [CrossRef] 
[40] Liu, X.Z., Ding, L., et al. (2021) Room-Temperature Ionic Conductivity of Ba, Y, Al Co-Doped Li7La3Zr2O12 Solid Electrolyte after Sintering. Rare Metals, 40, 2301-2306.
[Google Scholar] [CrossRef] 
[41] Huang, B., Hua, H., Lai, P., et al. (2022) Constructing Ion-Selective Coating Layer with Lithium Ion Conductor LLZO and Binder Li-Nafion for Separator Used in Lith-ium-Sulfur Batteries. ChemElectroChem, 9, e202200416.
[Google Scholar] [CrossRef] 
[42] Kamaya, N., Homma, K., Yamakawa, Y., et al. (2011) A Lithium Superionic Conductor. Nature Materials, 10, 682-686.
[Google Scholar] [CrossRef] [PubMed]
[43] Li, G., Gao, Y., He, X., et al. (2017) Organosulfide-Plasticized Solid-Electrolyte Interphase Layer Enables Stable Lithium Metal Anodes for Long-Cycle Lithium-Sulfur Batteries. Nature Communications, 8, Article No. 850.
[Google Scholar] [CrossRef] [PubMed]
[44] Guo, W., Zhang, W., Si, Y., et al. (2021) Artificial Dual Solid-Electrolyte Interfaces Based on in Situ Organothiol Transformation in Lithium Sulfur Battery. Nature Com-munications, 12, Article No. 3031.
[Google Scholar] [CrossRef] [PubMed]
[45] Tao, X., Liu, Y., Liu, W., et al. (2017) Solid-State Lithi-um-Sulfur Batteries Operated at 37˚C with Composites of Nanostructured Li7La3Zr2O12/Carbon Foam and Polymer. Nano Letters, 17, 2967-2972.
[Google Scholar] [CrossRef] [PubMed]
[46] Chen, Y.T., Chuang, Y.C., Su, J.H., Yu, H.C. and Chen-Yang, Y.W. (2011) High Discharge Capacity Solid Composite Polymer Electrolyte Lithium Battery. Journal of Power Sources, 196, 2802-2809.
[Google Scholar] [CrossRef] 
[47] Ahmad, S., Saxena, T.K., Ahmad, S. and Agnihotry, S.A. (2006) The Effect of Nanosized TiO2 Addition on Poly (Methylmethacrylate) Based Polymer Electrolytes. Journal of Power Sources, 159, 205-209.
[Google Scholar] [CrossRef] 
[48] Miao, R., Liu, B., Zhu, Z., et al. (2008) PVDF-HFP-Based Porous Polymer Electrolyte Membranes for Lithium-Ion Batteries. Journal of Power Sources, 184, 420-426.
[Google Scholar] [CrossRef] 
[49] Rawsky, G.C. and Shriver, D.F. (1996) Rational Design of Novel Polyelectrolytes: Aluminosilicate/Poly (Ethylene Glycol) Copolymers. In: Pittman, C.U., Carraher, C.E., Zeldin, M., Sheats, J.E. and Culbertson, B.M., Eds., Metal-Containing Polymeric Materials, Springer, Boston, 383-393.
[Google Scholar] [CrossRef] 
[50] Ma, Q., Zhang, H., Zhou, C., et al. (2016) Single Lithium-Ion Conducting Polymer Electrolytes Based on a Super-Delocalized Polyanion. Angewandte Chemie In-ternational Edition, 55, 2521-2525.
[Google Scholar] [CrossRef] [PubMed]
[51] Nair, J.R., Imholt, L., Brunklaus, G. and Winter, M. (2019) Lithium Metal Polymer Electrolyte Batteries: Opportunities and Challenges. The Electrochemical Society Interface, 28, Article No. 55.
[Google Scholar] [CrossRef] 
[52] Khurana, R., Schaefer, J.L., Archer, L.A. and Coates, G.W. (2014) Suppression of Lithium Dendrite Growth Using Cross-Linked Polyethylene/Poly (Ethylene Oxide) Electrolytes: A New Approach for Practical Lithium-Metal Polymer Batteries. Journal of the American Chemical Society, 136, 7395-7402.
[Google Scholar] [CrossRef] [PubMed]
[53] Eshetu, G.G., Judez, X., Li, C., et al. (2018) Ultrahigh Performance All Solid-State Lithium Sulfur Batteries: Salt Anion’s Chemistry-Induced Anomalous Synergistic Effect. Journal of the American Chemical Society, 140, 9921- 9933.
[Google Scholar] [CrossRef] [PubMed]
[54] Judez, X., Zhang, H., Li, C., et al. (2017) Polymer-Rich Composite Electrolytes for All-Solid-State Li-S Cells. The Journal of Physical Chemistry Letters, 8, 3473-3477.
[Google Scholar] [CrossRef] [PubMed]
[55] Li, M., Frerichs, J.E., Kolek, M., et al. (2020) Solid-State Lithium-Sulfur Battery Enabled by Thio-LiSICON/Polymer Composite Electrolyte and Sulfurized Polyacrylonitrile Cathode. Advanced Functional Materials, 30, Article No. 1910123.
[Google Scholar] [CrossRef] 
[56] Bai, Y., Zhao, Y., Li, W., et al. (2020) Organic-Inorganic Mul-ti-Scale Enhanced Interfacial Engineering of Sulfide Solid Electrolyte in Li-S Battery. Chemical Engineering Journal, 396, Article ID: 125334.
[Google Scholar] [CrossRef] 
[57] Su, Y., Zhang, X., Du, C., et al. (2022) An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte. Small, 18, Article ID: 2202069.
[Google Scholar] [CrossRef] [PubMed]

为你推荐