3D生物打印骨组织工程支架在骨缺损修复中的研究进展
Research Progress of 3D Biological Printing Bone Tissue Engineering Scaffolds in Bone Defect Repair
DOI: 10.12677/ACM.2022.12121703, PDF,    国家自然科学基金支持
作者: 郑中忍：济宁医学院临床医学院，山东 济宁；王国栋, 马 辉, 赵晓伟*：济宁医学院附属医院骨关节科，山东 济宁
关键词: 3D生物打印；骨组织工程；仿生支架；骨缺损；3D Biological Printing； Bone Tissue Engineering； Bionic Scaffold； Bone Defect
摘要: 大面积骨缺损的再生修复一直是临床上亟待解决的问题，骨移植所带来的并发症问题，严重地限制了目前的治疗选择。因此寻找比骨移植更适宜的替代疗法已成为目前的研究热点。3D生物打印骨组织工程支架的出现为骨缺损的修复提供了新思路、新方向。通过采用不同材料获得具有良好机械性能和生物相容性的支架，促进骨骼和软组织的修补及诱导再生，进而满足骨缺损修复的复杂需求。本文就3D生物打印技术以及不同种类的3D生物打印支架在骨缺损修复中的发展状况进行总结阐述，并讨论了当前面临的挑战及未来发展的前景。
Abstract: The regeneration and repair of large bone defects has always been an urgent problem to be solved in clinical practice. The complications caused by bone transplantation seriously limit the current treatment options. Therefore, to find a more suitable alternative therapy than bone transplantation has become a research hotspot. The appearance of 3D biological printing bone tissue engineering scaffold provides a new idea and direction for bone defect repair. By using different materials to obtain scaffolds with good mechanical properties and biocompatibility, it can promote the repair and induced regeneration of bone and soft tissue, thus meeting the complex needs of bone defect repair. This paper summarized the development of 3D biological printing technology and different kinds of 3D biological printing scaffolds in bone defect repair, and discussed the current challenges and future development prospects.
文章引用：郑中忍, 王国栋, 马辉, 赵晓伟. 3D生物打印骨组织工程支架在骨缺损修复中的研究进展[J]. 临床医学进展, 2022, 12(12): 11823-11830. https://doi.org/10.12677/ACM.2022.12121703

参考文献

[1] Nauth, A., Schemitsch, E., Norris, B., et al. (2018) Critical-Size Bone Defects: Is There a Consensus for Diagnosis and Treatment? Journal of Orthopaedic Trauma, 32, S7-S11. [Google Scholar] [CrossRef] 
[2] Brydone, A.S., Meek, D. and Maclaine, S. (2010) Bone Grafting, Orthopaedic Biomaterials, and the Clinical Need for Bone Engineering. Proceedings of the Institution of Me-chanical Engineers, Part H, 224, 1329-1343. [Google Scholar] [CrossRef] 
[3] Faour, O., Dimitriou, R., Cousins, C.A., et al. (2011) The Use of Bone Graft Substitutes in Large Cancellous Voids: Any Specific Needs? Injury, 42, S87-S90. [Google Scholar] [CrossRef] [PubMed]
[4] Alluri, R., Song, X., Bougioukli, S., et al. (2019) Regional Gene Therapy with 3D Printed Scaffolds to Heal Critical Sized Bone Defects in a Rat Model. Journal of Biomedical Materials Research Part A, 107, 2174-2182. [Google Scholar] [CrossRef] [PubMed]
[5] Miao, Y., Chen, Y., Luo, J., et al. (2023) Black Phosphorus Nanosheets-Enabled DNA Hydrogel Integrating 3D-Printed Scaffold for Promoting Vascularized Bone Regeneration. Bioactive Materials, 21, 97-109. [Google Scholar] [CrossRef] [PubMed]
[6] Bose, S. and Sarkar, N. (2020) Natural Medicinal Compounds in Bone Tissue Engineering. Trends in Biotechnology, 38, 404-417. [Google Scholar] [CrossRef] [PubMed]
[7] Li, J.J., Ebied, M., Xu, J., et al. (2018) Current Approaches to Bone Tissue Engineering: The Interface between Biology and Engineering. Advanced Healthcare Materials, 7, e1701061. [Google Scholar] [CrossRef] [PubMed]
[8] Potyondy, T., Uquillas, J.A., Tebon, P.J., et al. (2021) Recent Ad-vances in 3D Bioprinting of Musculoskeletal Tissues. Biofabrication, 13. [Google Scholar] [CrossRef] [PubMed]
[9] Genova, T., Roato, I., Carossa, M., et al. (2020) Advances on Bone Substitutes through 3D Bioprinting. International Journal of Molecular Sciences, 21, Article No. 7012. [Google Scholar] [CrossRef] [PubMed]
[10] Dey, M. and Ozbolat, I.T. (2020) 3D Bioprinting of Cells, Tissues and Organs. Scientific Reports, 10, Article No. 14023. [Google Scholar] [CrossRef] [PubMed]
[11] Gu, Z., Fu, J., Lin, H., et al. (2020) Development of 3D Bioprinting: From Printing Methods to Biomedical Applications. Asian Journal of Pharmaceutical Sciences, 15, 529-557. [Google Scholar] [CrossRef] [PubMed]
[12] Ostrovidov, S., Salehi, S., Costantini, M., et al. (2019) 3D Bioprinting in Skeletal Muscle Tissue Engineering. Small, 15, e1805530. [Google Scholar] [CrossRef] [PubMed]
[13] Bandyopadhyay, A., Mitra, I. and Bose, S. (2020) 3D Printing for Bone Regeneration. Current Osteoporosis Reports, 18, 505-514. [Google Scholar] [CrossRef] [PubMed]
[14] Sigaux, N., Pourchet, L., Breton, P., et al. (2019) 3D Bioprinting: Principles, Fantasies and Prospects. Journal of Stomatology, Oral and Maxillofacial Surgery, 120, 128-132. [Google Scholar] [CrossRef] [PubMed]
[15] Wubneh, A., Tsekoura, E.K., Ayranci, C., et al. (2018) Current State of Fabrication Technologies and Materials for Bone Tissue Engineering. Acta Biomaterialia, 80, 1-30. [Google Scholar] [CrossRef] [PubMed]
[16] Williams, D.F. (2008) On the Mechanisms of Biocompatibility. Biomaterials, 29, 2941-2953. [Google Scholar] [CrossRef] [PubMed]
[17] Park, J.Y., Park, S.H., Kim, M.G., et al. (2018) Biomimetic Scaffolds for Bone Tissue Engineering. Advances in Experimental Medicine and Biology, 1064, 109-121. [Google Scholar] [CrossRef] [PubMed]
[18] Murphy, C.M., Haugh, M.G. and O’Brien, F.J. (2010) The Ef-fect of Mean Pore Size on Cell Attachment, Proliferation and Migration in Collagen-Glycosaminoglycan Scaffolds for Bone Tissue Engineering. Biomaterials, 31, 461-466. [Google Scholar] [CrossRef] [PubMed]
[19] Bharadwaz, A. and Jayasuriya, A.C. (2020) Recent Trends in the Application of Widely Used Natural and Synthetic Polymer Nanocomposites in Bone Tissue Regeneration. Materi-als Science & Engineering C—Materials for Biological Applications, 110, Article ID: 110698. [Google Scholar] [CrossRef] [PubMed]
[20] Aamodt, J.M. and Grainger, D.W. (2016) Extracellular Ma-trix-Based Biomaterial Scaffolds and the Host Response. Biomaterials, 86, 68-82. [Google Scholar] [CrossRef] [PubMed]
[21] Heinrich, M.A., Liu, W., Jimenez, A., et al. (2019) 3D Bi-oprinting: From Benches to Translational Applications. Small, 15, e1805510. [Google Scholar] [CrossRef] [PubMed]
[22] 王进, 葛建飞, 郭开今, 等. 3D打印多孔材料应用于骨缺损修复的研究进展[J]. 中华骨与关节外科杂志, 2019, 12(7): 556-560.
[23] Gao, C., Deng, Y., Feng, P., et al. (2014) Cur-rent Progress in Bioactive Ceramic Scaffolds for Bone Repair and Regeneration. International Journal of Molecular Sci-ences, 15, 4714-4732. [Google Scholar] [CrossRef] [PubMed]
[24] Shim, J.H., Won, J.Y., Park, J.H., et al. (2017) Effects of 3D-Printed Polycaprolactone/Beta-Tricalcium Phosphate Membranes on Guided Bone Regeneration. Interna-tional Journal of Molecular Sciences, 18, Article No. 899. [Google Scholar] [CrossRef] [PubMed]
[25] Huh, J., Lee, J., Kim, W., et al. (2018) Preparation and Characterization of Gelatin/Alpha-TCP/SF Biocomposite Scaffold for Bone Tissue Regeneration. International Journal of Biological Macromolecules, 110, 488-496. [Google Scholar] [CrossRef] [PubMed]
[26] Bose, S., Roy, M. and Bandyopadhyay, A. (2012) Recent Ad-vances in Bone Tissue Engineering Scaffolds. Trends in Biotechnology, 30, 546-554. [Google Scholar] [CrossRef] [PubMed]
[27] Sun, X., Ma, Z., Zhao, X., et al. (2021) Three-Dimensional Bi-oprinting of Multicell-Laden Scaffolds Containing Bone Morphogenic Protein-4 for Promoting M2 Macrophage Polari-zation and Accelerating Bone Defect Repair in Diabetes Mellitus. Bioactive Materials, 6, 757-769. [Google Scholar] [CrossRef] [PubMed]
[28] Bendtsen, S.T., Quinnell, S.P. and Wei, M. (2017) Develop-ment of a Novel Alginate-Polyvinyl Alcohol-Hydroxyapatite Hydrogel for 3D Bioprinting Bone Tissue Engineered Scaffolds. Journal of Biomedical Materials Research Part A, 105, 1457-1468. [Google Scholar] [CrossRef] [PubMed]
[29] Hsieh, C.T. and Hsu, S.H. (2019) Double-Network Polyurethane-Gelatin Hydrogel with Tunable Modulus for High-Resolution 3D Bioprinting. ACS Applied Materials & Interfaces, 11, 32746-32757. [Google Scholar] [CrossRef] [PubMed]
[30] Hassanajili, S., Karami-Pour, A., Oryan, A., et al. (2019) Preparation and Characterization of PLA/PCL/HA Composite Scaffolds Using Indirect 3D Printing for Bone Tissue Engineering. Materials Science & Engineering C—Materials for Biological Applications, 104, Article ID: 109960. [Google Scholar] [CrossRef] [PubMed]
[31] Vijayavenkataraman, S., Yan, W.C., Lu, W.F., et al. (2018) 3D Bioprinting of Tissues and Organs for Regenerative Medicine. Advanced Drug Delivery Reviews, 132, 296-332. [Google Scholar] [CrossRef] [PubMed]
[32] Kim, S.S., Sun, P.M., Jeon, O., et al. (2006) Poly(lactide-co-glycolide)/Hydroxyapatite Composite Scaffolds for Bone Tissue Engineering. Biomaterials, 27, 1399-1409. [Google Scholar] [CrossRef] [PubMed]
[33] Zhang, Y., Wu, D., Zhao, X., et al. (2020) Stem Cell-Friendly Scaffold Biomaterials: Applications for Bone Tissue Engineering and Regenerative Medicine. Fron-tiers in Bioengineering and Biotechnology, 8, Article ID: 598607. [Google Scholar] [CrossRef] [PubMed]
[34] Zheng, C., Attarilar, S., Li, K., et al. (2021) 3D-Printed HA15-Loaded Beta-Tricalcium Phosphate/Poly(Lactic-co-glycolic acid) Bone Tissue Scaffold Promotes Bone Regenera-tion in Rabbit Radial Defects. International Journal of Bioprinting, 7, 317. [Google Scholar] [CrossRef] [PubMed]
[35] Lei, Y., Xu, Z., Ke, Q., et al. (2017) Strontium Hydroxyapatite/Chitosan Nanohybrid Scaffolds with Enhanced Osteoinductivity for Bone Tissue Engineering. Materials Science & Engineering C—Materials for Biological Applications, 72, 134-142. [Google Scholar] [CrossRef] [PubMed]
[36] Luo, Y., Zhai, D., Huan, Z., et al. (2015) Three-Dimensional Printing of Hollow-Struts-Packed Bioceramic Scaffolds for Bone Regeneration. ACS Applied Materials & Interfaces, 7, 24377-24383. [Google Scholar] [CrossRef] [PubMed]
[37] Wang, Y., Gao, M., Wang, D., et al. (2020) Nanoscale 3D Bioprint-ing for Osseous Tissue Manufacturing. International Journal of Nanomedicine, 15, 215-226. [Google Scholar] [CrossRef] 
[38] Zhang, J., Eyisoylu, H., Qin, X.H., et al. (2021) 3D Bioprinting of Gra-phene Oxide-Incorporated Cell-Laden Bone Mimicking Scaffolds for Promoting Scaffold Fidelity, Osteogenic Differen-tiation and Mineralization. Acta Biomaterialia, 121, 637-652. [Google Scholar] [CrossRef] [PubMed]
[39] Zhang, Y., Yu, W., Ba, Z., et al. (2018) 3D-Printed Scaffolds of Mesoporous Bioglass/Gliadin/Polycaprolactone Ternary Composite for Enhancement of Compressive Strength, Degra-dability, Cell Responses and New Bone Tissue Ingrowth. International Journal of Nanomedicine, 13, 5433-5447. [Google Scholar] [CrossRef] 
[40] Dang, W., Ma, B., Li, B., et al. (2020) 3D Printing of Metal-Organic Framework Nanosheets-Structured Scaffolds with Tumor Therapy and Bone Construction. Biofabrication, 12, Article ID: 025005. [Google Scholar] [CrossRef] [PubMed]
[41] Wang, Z., Hui, A., Zhao, H., et al. (2020) A Novel 3D-Bioprinted Porous Nano Attapulgite Scaffolds with Good Performance for Bone Regeneration. International Journal of Nanomedi-cine, 15, 6945-6960. [Google Scholar] [CrossRef] 
[42] Li, J., Hong, J., Zheng, Q., et al. (2011) Repair of Rat Cranial Bone De-fects with nHAC/PLLA and BMP-2-Related Peptide or rhBMP-2. Journal of Orthopaedic Research, 29, 1745-1752. [Google Scholar] [CrossRef] [PubMed]

为你推荐