养殖工船深海取水管收放装置结构设计与分析
Structure Design and Analysis of the Recovery and Release Device for the Breeder Ship’s Deep Sea Water Intake Pipe
DOI: 10.12677/IaE.2022.104044, PDF,    科研立项经费支持
作者: 赵雷刚, 程 涛, 李洪强：武汉船用机械有限责任公司，湖北 武汉
关键词: 养殖工船；取水管收放装置；塔架；Breeder Ship； Recovery and Release Device； Tower
摘要: 养殖工船在海洋环境条件下，取水管收放过程负载大、对塔架稳定性要求高，针对养殖工船取水管收放塔架功能进行了结构设计，并分析了各使用工况，通过有限元分析进行结构强度和屈曲分析，通过分析，结构强度和稳定性满足要求，设计合理。
Abstract: Under the conditions of marine environment, the recovery and release device has a large load and high requirements for the stability of the tower. The paper has carried out the structural design based on the function of the water intake pipe recovery and release tower, and has analyzed the structural strength of various working conditions. Through finite element analysis, the structural strength and stability meet the requirements and the design is reasonable through analysis.
文章引用：赵雷刚, 程涛, 李洪强. 养殖工船深海取水管收放装置结构设计与分析[J]. 仪器与设备, 2022, 10(4): 337-343. https://doi.org/10.12677/IaE.2022.104044

参考文献

[1] 李志雨, 童波, 邵武豪. 采用循环水技术的大型养殖工船总体设计探讨[J]. 船舶, 2022, 33(6): 20-29.
[2] 高瑞, 王庆伟, 张彬. 养殖工船快速性仿真分析及试验验证[J]. 船舶工程, 2020(S2): 6.
[3] 胡于进. 有限元分析及应用[M]. 北京: 清华大学出版社, 2014.
[4] CAD/CAM/CAE技术联盟. ANSYS Workbench 2020有限元分析从入门到精通[M]. 北京: 清华大学出版社, 2020.

为你推荐