基于FLUENT的压缩机消声器性能分析
Performance Analysis of Compressor Muffler Based on FLUENT
DOI: 10.12677/MOS.2023.121027, PDF,   
作者: 宋学清, 卢 曦：上海理工大学机械工程学院，上海；卢 诚：上海海立新能源技术有限公司，上海
关键词: 性能分析；消声器；有限元仿真；Performance Analysis； Muffler； Finite Element Simulation
摘要: 基于计算流体力学方法，采用FLUENT有限元仿真软件对单节扩张式消声器中扩张室截面直径和其长度对消声性能的影响规律进行研究。按照不同的方式将单节扩张式消声器分割成两个串联的小型消声器，研究不同分割方式对消声性能的影响规律。
Abstract: Based on the computational fluid dynamics method, the finite element simulation software FLUENT was used to study the influence law of the section diameter and length of expansion chamber on the muffler performance of single section expansion silencer. According to different ways, the single section expansion muffler is divided into two series of small mufflers, and the influence of different ways on the muffler performance is studied.
文章引用：宋学清, 卢曦, 卢诚. 基于FLUENT的压缩机消声器性能分析[J]. 建模与仿真, 2023, 12(1): 282-289. https://doi.org/10.12677/MOS.2023.121027

参考文献

[1] 张立军, 靳晓雄, 黄锁成, 等. 汽车空调压缩机引起的车内噪声试验研究[J]. 汽车工程, 2002, 24(5): 398-402.
[2] 张永军, 罗玉军, 罗建滔, 蒋邹. 压缩机排气管消声器的声学特性研究[J]. 环境技术, 2020, 38(2): 127-131.
[3] 李延民, 张智慧, 张永. 基于FLUENT的某型压力脉动衰减器的流场分析及优化设计[J]. 机床与液压, 2010, 38(11): 86-88.
[4] 门晓苏, 张卫义, 赵杰, 袁伟. 基于平面波理论的压缩机气流压力脉动分析与试验研究[J]. 流体机械, 2017, 45(12): 1-7+12.
[5] Done, V., Balide, V. and Tamma, B. (2014) Muffler Design for a Refrigerator Compressor. International Com-pressor Engineering Conference, West Lafayette, 2014, Paper 2262.
[6] 唐景洪, 刘政, 张课微, 洪鑫. 并联消声单元整体消声器性能分析[J]. 中国科技论文, 2022, 17(2): 141-149.
[7] Selamet, A., Ji, Z.L. and Radavich, P.M. (1998) Acoustic Attenuation Performance of Circular Expansion Chambers with Offset Inlet/Outlet: II. Comparison with Experimental and Computational Studies. Journal of Sound and Vibration, 213, 619-641. [Google Scholar] [CrossRef] 
[8] Park, J.C., Wang, S.M., et al. (2004) Boundary Element Analysis of the Muffler for the Noise Reduction of the Compressors. Inter-national Compressor Engineering Conference, West Lafayette, 2004, Paper 1678.
[9] 单长吉. 压力脉动衰减器的数学模型仿真及CFD流体解析[D]: [硕士学位论文]. 成都: 西南交通大学, 2004.

为你推荐