山溪型河道桥梁阻水关键参数的仿真计算分析
Simulation and Analysis of Key Parameters of Water Blocking Causes of Bridge in Mountain River
DOI: 10.12677/JWRR.2023.121008, PDF,   
作者: 张善亮：中国电建集团华东勘测设计研究院有限公司，浙江 杭州
关键词: 拱形桥梁；Fr数；桥梁壅水；湍流强度；Arch Bridge； Froude Number； Bridge Backwater； Turbulence Intensity
摘要: 为分析多孔拱桥阻水特性，采用一维水动力模型和三维模型结合方式计算桥梁壅水水面线。首先利用一维模型计算较大范围河道水面线，再以一维模型成果为边界条件，构建桥梁附近小范围河道三维模型，通过不同流量工况计算，分析桥梁壅水成因。结果表明：流量、Fr数与桥梁壅水高度呈正相关；桥梁尾流的湍流强度也受流量影响，流量越大，湍流强度越大，桥梁壅水也越高；通过改变桥梁阻水的关键因素Fr数，可以减少桥梁阻水作用。
Abstract: To analyze the water blocking characteristics of open spandrel arch bridge, one-dimensional hydrodynamic model and three-dimensional model are combined to calculate the water surface profile of mountain stream channel. Firstly, one-dimensional model is used to calculate the water surface profile in a large scale, and then one-dimensional model results are used as boundary conditions, and three-dimensional model of some river reaches near the bridge is used to calculate different flow conditions, to analyze the causes of bridge backwater. The results show that the discharge and Fr number are positively correlated with the backwater height caused by the bridge; the turbulence intensity of the bridge wake is also affected by the flow rate; the greater the flow rate is, the greater the turbulence intensity, and the higher the backwater caused by the bridge; by changing the key factor Fr number of bridge water resistance, the water resistance effect of bridge can be reduced.
文章引用：张善亮. 山溪型河道桥梁阻水关键参数的仿真计算分析[J]. 水资源研究, 2023, 12(1): 65-76. https://doi.org/10.12677/JWRR.2023.121008

参考文献

[1] SZYDŁOWSKI, M. Numerical simulation of open channel flow between bridge piers. Task Quarterly, 2011, 15(3-4): 271-282.
[2] GHOSTINE, R., KESSERWANI, G., MOSÉ, R., et al. A confrontation of 1D and 2D RKDG numerical simulation of transitional flow at open-channel junction. International Journal for Numerical Methods in Fluids, 2010, 61(7): 752-767. [Google Scholar] [CrossRef] 
[3] 王圆圆, 黄细彬. 分期导流束窄河道泄流物理试验及数值模拟研究[J]. 水电能源科学, 2012, 30(12): 98-100. WANG Yuanyuan, HUANG Xibin. Physical experiment and numerical simulation of discharge in narrow channel with staged diversion beam. Water Resources and Power, 2012, 30(12): 98-100. (in Chinese)
[4] BHALLAMUDI, S. M., CHAUDHRY, M. H. Computation of flows in open-channel transitions. Journal of Hydraulic Research, 1992, 30(1): 77-93. [Google Scholar] [CrossRef] 
[5] LADOPOULOS, E. G. Contractions and expansions in open channel hydraulics by S.I.O.M. Universal Journal of Hydraulics, 2014(2): 1-10.
[6] Danish Hydraulic Institute (DHI). MIKE21 & MIKE3 flow model FUM. Public: Horsholm Denmark Hydrodynamic and Transport Module Scientific Document, DHI, 2012: 14-15.
[7] 何勇, 金生. 弯曲型交汇河口三维数值模拟研究[J]. 水利与建筑工程学报, 2019, 17(2): 232-238, 244. HE Yong, JIN Sheng. Three-dimensional numerical simulation of flows in bend river junction. Journal of Water Resources and Architectural Engineering, 2019, 17(2): 232-238, 244. (in Chinese)
[8] CHANEL, P. G., DOERING, J. C. Assessment of spillway modeling using computational fluid dynamics. Canadian Journal of Civil Engineering, 2008, 35(12): 1481-1485. [Google Scholar] [CrossRef] 
[9] HUNT, J. H., BRUNNER, G. W. Flow transitions in bridge backwater analysis. Hydrologic Engineering Center, 1995: 23-36.
[10] Flow Science, Inc., Santa Fe, NM, USA. FLOW-3D version 10.1 users manual (2012).
[11] 蒋卫威, 鱼京善, 王纤阳, 等. 基于三维水动力模型与经验公式的桥梁雍水模拟与计算[J]. 水利水电技术, 2020, 51(9): 97-104. JIANG Weiwei, YU Jingshan, WANG Xianyang, et al. Bridge backwater simulation and calculation based on 3d hydrodynamic model and empirical formula. Water Resources and Hydropower Engineering, 2020, 51(9): 97-104. (in Chinese)
[12] 张罗号, 张红武, 赵晨苏. 复杂河流面积型Froude数新形式及其应用[J]. 应用基础与工程科学学报, 2016, 24(6): 1170-1180. ZHANG Luohao, ZHANG Hongwu and ZHAO Chensu. New form of Froude number of complex river area type and its application. Journal of Basic Science and Engineering, 2016, 24(6): 1170-1180. (in Chinese)