基于陶瓷复合材料的盘式制动器热力耦合仿真分析
Thermo-Mechanical Coupling Simulation Analysis of Disc Brake Based on Ceramic Composite Material
摘要: 针对盘式制动器在制动过程中温度分布不均而产生过大热变形，甚至出现热疲劳裂纹、磨料脱落等问题，利用ANSYS Workbench平台建立SiCP/Al陶瓷复合材料盘式制动器热力耦合模型，探究了不同制动力和制动速度下制动盘温度、位移、应力的变化规律，并将计算结果与传统金属制动盘进行对比。结果表明：在额定速度下，随着制动压力的等量增加，温度及应力的最大值均随着制动压力的等量增加而非线性增加，位移沿径向方向呈现出先增大后减小的趋势；随着制动速度的增加，温度的差异明显增大，最大应力与位移均出现在制动盘与摩擦片接触处；与传统材料制动盘相比SiCP/Al陶瓷复合材料制动盘制动效果更加明显且制动性能更稳定。相关结果可为盘式制动器的安全运行和优化设计提供技术参考。
Abstract: Aiming at the problems of excessive thermal deformation and even thermal fatigue cracks and abrasive shedding caused by uneven temperature distribution of disc brake during braking, the thermal coupling model of SiCP/Al ceramic composite disc brake is established by using the ANSYS Workbench platform, and the change laws of brake disc temperature, displacement and stress un-der different braking forces and braking speeds are investigated, and the calculated results are compared with those of traditional metal brake discs. The results show that at the rated speed, with the equal increase of the brake pressure, the maximum values of temperature and stress increase nonlinearly with the equal increase of the brake pressure, and the displacement first increases and then decreases along the radial direction; With the increase of braking speed, the temperature dif-ference increases significantly, and the maximum stress and displacement appear at the contact of brake disc and friction plate; Compared with traditional brake discs, SiCP/Al ceramic composite brake discs have more obvious braking effect and more stable braking performance. The relevant results can provide technical reference for the safe operation and optimal design of the disc brake.
文章引用：刘明. 基于陶瓷复合材料的盘式制动器热力耦合仿真分析[J]. 建模与仿真, 2023, 12(2): 962-973. https://doi.org/10.12677/MOS.2023.122091

参考文献

[1] 石康, 苏旭武, 吴炎炎, 等. 周盘式制动器热-应力耦合特性的分析探究[J]. 机械传动, 2022, 46(11): 104-109.
[2] Luo, J., Liu, J.Z., You, Z.Y., et al. (2022) Fatigue Life Prediction of Brake Discs for High-Speed Trains via Thermal Stress. Science Progress, 105, Article ID: 00368504221102742. [Google Scholar] [CrossRef] [PubMed]
[3] 黎小辉, 万霞, 甘春雷. 汽车制动材料研究现状与发展趋势[J]. 材料研究与应用, 2020, 14(3): 240-245.
[4] 杜丹丰, 王麒麟. SiCp/Al陶瓷复合材料制动块磨损数值模拟[J]. 中国新技术新产品, 2022, 459(5): 1-6.
[5] Ma, Z.W., Zheng, C.S., Xiong, C.B., et al. (2022) Friction-Wear Characteristics of Carbon Fiber Reinforced Paper-Based Friction Materials under Different Working Con-ditions. Materials, 15, 3682. [Google Scholar] [CrossRef] [PubMed]
[6] Li, S.H., Wei, C., Wang, Y.H., et al. (2022) Effects of High Ambient Tempera-ture and Surface Quality on Tribological Properties of Si3N4. Journal of Materials Engineering and Performance, 13, 3412. [Google Scholar] [CrossRef] 
[7] Si, L., Liu, C., Yan, H.J., et al. (2021) The Influences of High Temper-ature on Tribological Properties of Cu-Based Friction Materials with a Friction Phase of SiO2/SiC/Al2O3. Journal of Materials Engineering and Performance, 11, Article ID: 025335. [Google Scholar] [CrossRef] 
[8] Wei, L., Choy, Y.S., Cheung, C.S., et al. (2021) Comparison of Tribology Performance, Particle Emissions and Brake Squeal Noise between Cu-Containing and Cu-Free Brake Materials. Wear, 466, Article ID: 203577. [Google Scholar] [CrossRef] 
[9] Jubsilp, C., Jantaramaha, J., Mora, P., et al. (2021) Tribological Perfor-mance and Thermal Stability of Nanorubber- Modified Polybenzoxazine Composites for Non-Asbestos Friction Materials. Polymers, 13, 2435. [Google Scholar] [CrossRef] [PubMed]
[10] Wen, M. (2022) An Analysis of the Coupling between Temperature and Thermal Stress of Disc Brakes Based on Finite Element. International Journal of Heat and Technology, 39, 1819-1827. [Google Scholar] [CrossRef] 
[11] Belhocine, A. and Afzal, A. (2020) A Predictive Tool to Evaluate Braking Sys-tem Performance Using a Fully Coupled Thermo-Mechanical Finite Element Model. International Journal of Interactive Design and Manufacturing, 14, 225-253. [Google Scholar] [CrossRef] 
[12] Yevtushenko, A., Kuciej, M., Topczewska, K., et al. (2020) Frictional Heating during Braking of the c/c Composite Disc. Materials, 13, 2691. [Google Scholar] [CrossRef] [PubMed]
[13] Yuan, Z.W., Tian, C., Wu, M.L., et al. (2021) A Modified Uniformly Distributed Heat Source Method for Predicting Braking Temper-ature of Railway Brake Disc. International Journal of Rail Transportation, 10, 216-229. [Google Scholar] [CrossRef] 
[14] Modanloo, A. and Talaee, M.R. (2020) Analytical Thermal Analy-sis of Advanced Disk Brake in High Speed Vehicles. Mechanics of Advanced Materials and Structures, 27, 209-217. [Google Scholar] [CrossRef] 
[15] 张森. 汽车通风盘式制动器的流固热多物理场耦合分析及结构优化[D]: [博士学位论文]. 青岛: 山东科技大学, 2017.

为你推荐