核磁共振脉冲序列发生器集成化研究进展
Research Progress of Nuclear Magnetic Resonance Pulse Sequence Generator Integration
DOI: 10.12677/SEA.2023.122024, PDF,    科研立项经费支持
作者: 刘 颖*, 刘 意, 林 羚, 章浩伟：上海理工大学健康科学与工程学院，上海
关键词: 核磁共振；脉冲序列发生器；集成化；片上系统；Nuclear Magnetic Resonance； Pulse Sequence Generator； Integration； System on Chip
摘要: 讨论了核磁共振脉冲序列发生器的基本结构、工作原理和性能要求。从硬件复杂度、软件编程复杂度和序列产生实时性等方面出发，对国内外脉冲序列发生器集成化的研究进展进行了分析，比较了不同硬件架构的优势和不足。此基础上，提出了基于ZYNQ片上系统(System on Chip, SoC)的设计方案，为设计更高程度集成化、更高时间分辨率序列发生器提供了参考方案。
Abstract: This paper discusses the basic structure, working principle and performance requirements of NMR pulse sequence generator. Then the research progress of pulse sequence generator integration at home and abroad was analyzed from the aspects of hardware complexity, software programming complexity and real-time sequence generation. It also compares the advantages and disadvantages of different hardware architectures. On this basis, a design scheme based on ZYNQ SoC is proposed, which provides a reference scheme for designing a more integrated and higher time resolution sequence generator.
文章引用：刘颖, 刘意, 林羚, 章浩伟. 核磁共振脉冲序列发生器集成化研究进展[J]. 软件工程与应用, 2023, 12(2): 242-249. https://doi.org/10.12677/SEA.2023.122024

参考文献

[1] 俎栋林. 核磁共振成像仪: 构造原理和物理设计[M]. 北京: 科学出版社, 2015: 229-231.
[2] 马月萍. 基于FPGA与DDS的磁共振成像射频脉冲发生器的研制[D]: [硕士学位论文]. 北京: 北京化工大学, 2013.
[3] 李聿为, 肖亮. 基于FPGA与DDS的磁共振成像射频脉冲发生器[J]. 波谱学杂志, 2016, 33(4): 590-596.
[4] 韩旭. 基于512MSDRAM的脉冲序列发生器[D]: [硕士学位论文]. 上海: 华东师范大学, 2010.
[5] 李琳. 基于DSP的磁共振成像谱仪脉冲序列发生器的软件实现[D]: [硕士学位论文]. 北京: 北京化工大学, 2015.
[6] Lowe, I.J. and Howard, R.L. (1962) Digital Transistor Circuit for Generation of Timing Pulses for Pulsed NMR. Review of Scientific Instruments, 33, 96-100. [Google Scholar] [CrossRef] 
[7] Handa, S., Domalain, T. and Kose, K. (2007) Single-Chip Pulse Programmer for Magnetic Resonance Imaging Using a 32-Bit Microcontroller. The Review of Scientific Instruments, 78, Article 084705. [Google Scholar] [CrossRef] [PubMed]
[8] 高波, 李亚莉, 王炳灿, 何文学. 自动多脉冲序列发生器的设计与实现[J]. 仪表技术, 2009(12): 40-42.
[9] Adduci, D.J. and Gerstein, B.C. (1979) Versatile Pulse Programmer for Nuclear Magnetic Resonance. Review of Scientific Instruments, 50, 1403-1415. [Google Scholar] [CrossRef] [PubMed]
[10] Sidky, E.Y., Wachter, E.A. and Farrar, T.C. (1988) State-Machine Digital Pulse Generator. Review of Scientific Instruments, 59, 806-810. [Google Scholar] [CrossRef] 
[11] Hashimoto, S., Kose, K. and Haishi, T. (2012) Development of a Pulse Programmer for Magnetic Resonance Imaging Using a Personal Computer and a High-Speed Digital Input-Output Board. Review of Scientific Instruments, 83, 703-708. [Google Scholar] [CrossRef] [PubMed]
[12] Job, C., Pearson, R.M. and Brown, M.F. (1994) A Personal Computer-Based Nuclear Magnetic Resonance Spectrometer. Review of Scientific Instruments, 65, 3354-3362. [Google Scholar] [CrossRef] 
[13] Toyoda, T., Yoshida, H., Oishi, O. and Miyajima, S. (1997) Personal Computer-Controlled 16 Channel Versatile Pulse Generator for Nuclear Magnetic Resonance. Review of Scientific Instruments, 68, 3140-3142. [Google Scholar] [CrossRef] 
[14] 刘亿. 一种基于PCI的脉冲序列发生器[J]. 集成电路应用, 2004(12): 58-60.
[15] 胡坤, 宁瑞鹏. 具有独立延时功能的脉冲序列发生器[J]. 波谱学杂志, 2017, 34(3): 347-356.
[16] 刘颖, 沈杰, 李鲠颖. 基于USB总线的一体化核磁共振谱仪控制台[J]. 波谱学杂志, 2007(1): 35-41.
[17] 张志, 毛文平, 刘朝阳. 核磁共振脉冲序列发生器研究进展[J]. 波谱学杂志, 2012, 29(3): 339-345.
[18] Liu, Z., Cong, Z. and Zhou, H. (2006) A Novel Digital Magnetic Resonance Imaging Spectrometer. International Conference of the IEEE Engineering in Medicine & Biology Society, New York, 30 August-3 September 2006, 280-283. [Google Scholar] [CrossRef] 
[19] 周函. 高场多通道MRI谱仪扫描控制器的设计与实现[D]: [硕士学位论文]. 成都: 电子科技大学, 2018.
[20] 胡霞飞. 基于PXIe架构数字谱仪关键技术的设计与实现[D]: [硕士学位论文]. 成都: 电子科技大学, 2021.
[21] 沈杰, 徐勤, 陶红艳, 蒋瑜, 李鲠颖. 基于PC机的脉冲序列发生器[J]. 波谱学杂志, 2003, 20(2): 149-154.
[22] Belmonte, S.B., Sarthour, R.S. and Oliveira, I.S. (2003) A Field-Programmable Gate-Array-Based High-Resolution Pulse Programmer. Measurement Science & Technology, 14, N1-N4. [Google Scholar] [CrossRef] 
[23] Shen, J., Liu, Y. and Li, J.Q. (2005) A Powerful Graphical Pulse Sequence Programming Tool for Magnetic Resonance Imaging. Magma, 18, 332-342. [Google Scholar] [CrossRef] [PubMed]
[24] 田宇, 施赛烽, 郑子贤, 徐南阳. 基于FPGA的高分辨率数字脉冲信号发生器的设计与实现[J]. 合肥工业大学学报(自然科学版), 2020, 43(2): 224-226+258.
[25] 施赛烽, 叶润川, 林雪, 徐南阳. 基于FPGA和DDR3 SDRAM的高精度脉冲发生器设计与实现[J]. 合肥工业大学学报(自然科学版), 2021, 44(2): 206-209+283.
[26] Webber, J.B.W. and Demin, P. (2019) Credit-Card Sized Field and Benchtop NMR Relaxometers Using Field Programmable Gate Arrays. Magnetic Resonance Imaging, 56, 45-51. [Google Scholar] [CrossRef] [PubMed]
[27] 姚凯文, 郭桦炜, 董海峰, 等. 基于SOPC系统的0.5T磁共振成像仪控制台设计[J]. 电子测量技术, 2016(1): 105-109.
[28] Sun, L., Savory, J.J. and Warncke, K. (2013) Design and Implementation of an FPGA-Based Timing Pulse Programmer for Pulsed-Electron Paramagnetic Resonance Applications. Concepts in Magnetic Resonance Part B: Magnetic Resonance Engineering, 43, 100-109. [Google Scholar] [CrossRef] [PubMed]
[29] 谢庆明, 肖立志, 张晓玲, 等. 基于FPGA的低场核磁共振谱仪脉冲编程器设计与实现[J]. 波谱学杂志, 2011, 28(3): 317-325.
[30] Takeda, K. (2007) A Highly Integrated FPGA-Based Nuclear Magnetic Resonance Spectrometer. Review of Scientific Instruments, 78, 1235-1240. [Google Scholar] [CrossRef] [PubMed]
[31] 张霞. 脉冲核磁共振仪激励源设计[D]: [硕士学位论文]. 保定: 河北大学, 2010.
[32] 王文理, 梁春峰, 李小亭, 刘志强, 孙伟. 脉冲核磁共振硬脉冲序列发生器的设计[J]. 核电子学与探测技术, 2009, 29(5): 1175-1178.
[33] 戴祎栋. 基于DSP技术的成像谱仪硬件单元的研制[D]: [硕士学位论文]. 上海: 华东师范大学, 2009.
[34] 潘文宇. 一种新型MRI谱仪的设计及关键技术研究[D]: [博士学位论文]. 合肥: 中国科学技术大学, 2011.
[35] 马维超, 程晶晶, 李学伟, 张亚鹏. 通用核磁共振测井脉冲序列发生器的逻辑设计[J]. 国外电子测量技术, 2015, 34(7): 37-42.
[36] Xiao, L., Sun, B.H. and Ma, Y.P. (2013) A Digital Magnetic Resonance Imaging Spectrometer Using Digital Signal Processor and Field Programmable Gate Array. Review of Scientific Instruments, 84, Article 054702. [Google Scholar] [CrossRef] [PubMed]
[37] Liang, X., Tang, X. and Tang, W.N. (2014) A High-Field Magnetic Resonance Imaging Spectrometer Using an Oven-Controlled Crystal Oscillator as the Local Oscillator of Its Radio Frequency Transceiver. Review of Scientific Instruments, 85, Article 094705. [Google Scholar] [CrossRef] [PubMed]
[38] 赵茹砚. MRI谱仪的序列控制与射频发生电路设计[D]: [硕士学位论文]. 北京: 北京化工大学, 2014.
[39] Xiao, L., Li, L. and Nie, W. (2015) A Digital Signal Processor-Based Pulse Programmer with Performance of Run-Time Information Handling for Magnetic Resonance Imaging. Measurement Science & Technology, 26, Article 065402.
[40] 刘敏, 邱雯绮, 孙惠军, 陈忠. 便携式核磁共振谱仪的研究进展[J]. 波谱学杂志, 2014, 31(4): 504-514.
[41] Tang, W. and Wang, W. (2010) A Single-Board NMR Spectrometer Based on a Software Defined Radio Architecture. Measurement Science & Technology, 22, Article 015902. [Google Scholar] [CrossRef] 
[42] XILINX (2020) Zynq-7000 SoC Data Sheet: Overview.
https://docs.xilinx.com/v/u/en-US/ds190-Zynq-7000-Overview
[43] Zalesskiy, S.S., Danieli, E. and Blümich, B. (2014) Miniaturization of NMR Systems: Desktop Spectrometers, Microcoil Spectroscopy, and “NMR on a Chip” for Chemistry, Biochemistry, and Industry. Chemical Reviews, 114, 5641-5694. [Google Scholar] [CrossRef] [PubMed]
[44] Ha, D.W., Paulsen, J. and Sun, N. (2014) Scalable NMR Spectroscopy with Semiconductor Chips. Proceedings of the National Academy of Sciences of the United States of America, 111, 11955-11960. [Google Scholar] [CrossRef] [PubMed]
[45] Wegemann, A., Staat, C. and Jonathan, R. (2020) A Portable NMR Spectrometer with a Probe Head Combining RF and DC Capabilities to Generate Pulsed-Field Gradients. IEEE Transactions on Instrumentation and Measurement, 69, 8628-8636. [Google Scholar] [CrossRef] 

为你推荐