基于双向Cuk变换器的电动汽车锂电池组均衡研究
Research on Equalization of Lithium Battery Pack for Electric Vehicle Based on Bidirectional Cuk Converter
DOI: 10.12677/MOS.2023.123221, PDF,  被引量   
作者: 唐佳维, 吴冬春, 朱 飞, 顾伟伟：盐城工学院电气工程学院，江苏 盐城；冯彦博：河海大学机电工程学院，江苏 常州
关键词: Cuk变换器；反激式变换器；不一致性；均衡速度；分组式均衡；Cuk Converter； Flyback Converter； Inconsistency； Equilibrium Speed； Grouping Equalization
摘要: 现今锂电池是新能源汽车主要动力来源，但串联的锂电池组在使用过程中因为单体电池的不一致性，这种问题会导致电池的寿命和安全性降低。针对此问题，提出了一种将双向Cuk变换器和反激式变换器组合起来的动力电池组分组式均衡方案。本均衡方案分为组内均衡以及组间均衡，组内均衡是由双向Cuk电路来实现的，可以使相邻锂电池间快速均衡；而组间均衡是由单向反激式电路实现的，可使串联锂电池组给任意电量低的电池模块进行充电均衡。在Matlab/Simulink搭建仿真模型，通过仿真结果对比可以发现此分组式均衡方案不仅可以实现串联锂电池组的均衡，而且均衡速度更快，均衡效率良好。
Abstract: Nowadays lithium battery is the main power source of new energy vehicles, but the series lithium battery pack will reduce the life and safety of the battery due to the inconsistency of the single bat-tery during use. To solve this problem, a power battery pack grouping equalization scheme com-bining bidirectional Cuk converter and flyback converter is proposed. The equalization scheme is divided into intra-group equalization and inter-group equalization. The intra-group equalization is realized by bidirectional Cuk circuit, which can make the rapid equalization between adjacent lith-ium batteries. The intergroup equalization is realized by one-way flyback circuit, which can make the serial lithium battery pack charge equalization to any battery module with low power. The sim-ulation model was set up in Matlab/Simulink. By comparing the simulation results, it can be found that this grouping equalization scheme can not only realize the equalization of series lithium bat-tery pack, but also achieve faster equalization speed and good equalization efficiency.
文章引用：唐佳维, 吴冬春, 朱飞, 顾伟伟, 冯彦博. 基于双向Cuk变换器的电动汽车锂电池组均衡研究[J]. 建模与仿真, 2023, 12(3): 2411-2420. https://doi.org/10.12677/MOS.2023.123221

参考文献

[1] 李武华, 徐驰, 禹红斌, 等. 直流微网系统中混合储能分频协调控制策略怕[J]. 电工技术学报, 2016, 31(14): 84-92.
[2] 曹翊, 王永刚, 王青, 等. 水系钠离子电池的现状及展望[J]. 储能科学与技术, 2016, 5(3): 317-323.
[3] 郭向伟, 耿佳豪, 卜旭辉, 等. 基于反激变换器的串联电池新型均衡方法研究[J]. 储能技术与科学, 2020, 9(3): 979-985.
[4] 李勇, 王丽芳, 廖承林, 等. 基于子空间技术的电动汽车电池模型辨识研究[J]. 电工电能新技术, 2015, 34(1): 1-6.
[5] Cui, X.D., Shen, W.X., Zhang, Y.L., et al. (2017) Novel Active LiFePO4 Battery Balancing Method Based on Chargeable and Dis-chargeable Capacity. Computers & Chemical Engineering, 97, 27-35. [Google Scholar] [CrossRef] 
[6] Liu, J., Chen, Y. and Fathy, H.K. (2017) Nonlinear Mod-el-Predictive Optimal Control of an Active Cell-to-Cell Lithium-Ion Battery Pack Balancing Circuit. IFAC, 50, 14483-14488. [Google Scholar] [CrossRef] 
[7] 颜靖华. 分布式蓄电池监测系统中电压均衡技术研究[J]. 电源技术, 2015, 139(5): 975-976.
[8] 刘红锐, 夏超英. 一种新型的电动车用电池均衡方法探讨[J]. 汽车工程, 2013, 35(10): 934-938.
[9] 王通. 基于多输入绕组变压器的动力电池双层主动均衡电路研究[D]: [硕士学位论文]. 济南: 山东大学, 2017.
[10] 华旸, 周思达, 何瑢, 等. 车用锂离子动力电池组均衡管理系统研究进展[J]. 机械工程学报, 2019, 55(20): 73-84.
[11] 李志扬, 陈雨飞, 吕帅帅, 等. 锂电池组均衡方式的研究现状[J]. 电源技术, 2018, 42(9): 1404-1407.
[12] Rose, J.L. and Sankaragomathi, B. (2018) Comparison of Buck-Boost and Cuk Converters Based on Time Domain Response. Journal of Circuits, Systems and Computers, 27, 24-47. [Google Scholar] [CrossRef] 
[13] 甘正飞. 动力电池组分组式均衡方案的研究与设计[D]: [硕士学位论文]. 合肥: 合肥工业大学, 2015: 28-29.
[14] 翟二宁, 滑娟, 崔晓宇, 等. 动力电池组主动均衡系统设计与实现[J]. 电源技术, 2020, 44(2): 249-252.
[15] 叶凌云, 朱幸, 黄添添, 等. 变压器分立的动力电池组主动均衡技术研究[J]. 仪器仪表学报, 2018, 39(7): 83-91.

为你推荐