3D打印在建筑领域中的应用发展
Application and Development of 3D Printing in the Field of Architecture
DOI: 10.12677/HJCE.2023.125067, PDF,  被引量   
作者: 贾 杭*, 顾九毓, 庞扬扬：西京学院，陕西省混凝土结构安全与耐久性重点实验室，陕西 西安
关键词: 3D打印技术；建筑领域；应用发展；3D Printing Technology； Construction Field； Application Development
摘要: 随着3D打印技术的发展，传统的建筑行业也迎来了新一轮的变革，许多的建筑开始采用3D打印技术。一方面3D打印技术可以缩短施工工期，提升施工效率，另一方面3D打印技术还处于发展阶段，有着许多的不足。本文首先介绍3D打印技术的概念，简单阐述了3D打印技术在建造领域的优势和其现阶段发展现状研究，分析了3D打印建造技术的问题与不足，对3D打印建造技术的研究方向进行了展望。
Abstract: With the development of 3D printing technology, the traditional construction industry has also ushered in a new round of change, and many buildings have begun to use 3D printing technology. On the one hand, 3D printing technology can shorten the construction period and improve the construction efficiency; on the other hand, 3D printing technology is still in the development stage, and there are many shortcomings. This paper first introduces the concept of 3D printing technology, briefly expounds the advantages of 3D printing technology in the field of construction and the research on its current development status at the present stage, analyzes the problems and deficiencies of 3D printing construction technology, and prospects the research direction of 3D printing construction technology.
文章引用：贾杭, 顾九毓, 庞扬扬. 3D打印在建筑领域中的应用发展[J]. 土木工程, 2023, 12(5): 604-610. https://doi.org/10.12677/HJCE.2023.125067

参考文献

[1] 徐晗, 徐金花, 张馨瑜, 张欢, 郭宇轩. 3D打印技术在建筑领域的应用[J]. 建筑设计管理, 2020, 37(6): 85-89.
[2] Carneau, P., Mesnil, R., Roussel, N. and Baverel, O. (2020) Additive Manufacturing of Cantilever—From Masonry to Concrete 3D Printing. Automation in Construction, 29, Article ID: 103184.
[Google Scholar] [CrossRef] 
[3] 李小龙, 王栋民. 建筑3D打印技术及材料的研究进展[J]. 中国建材科技, 2021, 30(3): 29-35.
[4] 徐卫国. 数字建筑设计与建造的发展前景[J]. 当代建筑, 2020(2): 20-22.
[5] 罗毅. 3D打印建筑的应用与发展前景[J]. 深圳职业技术学院学报, 2020, 19(1): 34-39.
[6] 楚宇扬, 徐金涛, 刘烨, 张普, 汤意. 快硬硫铝酸盐水泥在3D打印材料中的应用[J]. 建筑材料学报, 2021, 24(5): 930-936.
[7] 石从黎, 林宗浩, 陈敬, 向川. 3D打印混凝土技术的初探[J]. 重庆建筑, 2017, 16(3): 24-27.
[8] Liu, Z., Li, M., Weng, Y., Wong, T.N. and Tan, M.J. (2019) Mixture Design Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material Printing. Construction and Building Materials, 198, 245-255.
[Google Scholar] [CrossRef] 
[9] 罗素蓉, 林欣, 孙金集, 王德辉. 氧化石墨烯对3D打印水泥基材料性能的影响[J/OL]. 复合材料学报: 1-10.
2023-05-18.[CrossRef] 
[10] 吴伟鸿, 罗素蓉, 欧翔, 王德辉, 黄欢. 矿物掺合料对3D打印水泥基材料力学各向异性的影响[J]. 福州大学学报(自然科学版), 2023, 51(2): 286-292.
[11] 李维红, 王乾, 陈旭浩, 常西栋, 陈宇红, 裴强. 纤维对3D打印水泥基材料力学性能的影响[J]. 实验力学, 2021, 36(4): 499-506.
[12] 乔星宇, 李韵通, 潘宁. 3D打印建筑混凝土配合比设计研究[J]. 现代装饰(理论), 2016(6): 240-241.
[13] Rubio, M., Sonebi, M. and Amziane, S. (2017) 3D Printing of Fibre Cement-Based Materials: Fresh and Rheological Performances. RILEM 2nd International Conference on Biobased Building Materials, Clermont-Ferrand, 21-23 June 2017.
[14] Ma, G., Li, Z. and Wang, L. (2018) Printable Properties of Cementitious Material Containing Copper Tailings for Extrusion Based 3D Printing. Construction and Building Materials, 162, 613-627.
[Google Scholar] [CrossRef] 
[15] Khalil, N., Aouad, G., El Cheikh, K. and Rémond, S. (2017) Use of Calcium Sulfoaluminate Cements for Setting Control of 3D-Printing Mortars. Construction and Building Materials, 157, 382-391.
[Google Scholar] [CrossRef] 
[16] Khoshnevis, B. (2004) Automated Construction by Contour Crafting—Related Robotics and Information Technologies. Automation in Construction, 13, 5-19.
[Google Scholar] [CrossRef] 
[17] Lim, S., et al. (2009) Fabricating Construction Components Using Layered Manufacturing Technology. Global Innovation in Construction Conference 2009 (GICC’09), Loughborough, 13-16 September 2009.
[18] Gosselin, C., Duballet, R., Roux, P., et al. (2016) Large-Scale 3D Printing of Ultra-High Performance Concrete—A New Processing Route for Architects and Builders. Materials & Design, 100, 102-109.
[Google Scholar] [CrossRef] 
[19] 丁烈云, 徐捷, 覃亚伟. 建筑3D打印数字建造技术研究应用综述[J]. 土木工程与管理学报, 2015, 32(3): 1-10.
[20] 赵夏瑀, 徐卫国. 3D打印建造技术的研究进展及其应用现状[J]. 中外建筑, 2021(10): 7-13.
[Google Scholar] [CrossRef] 
[21] Mechtcherine, V., Grafe, J., Nerella, V.N., et al. (2018) 3D-Printed Steel Reinforcement for Digital Concrete Construction—Manufacture, Mechanical Properties and Bond Behaviour. Construction and Building Materials, 179, 125-137.
[Google Scholar] [CrossRef] 
[22] 黄舒弈, 张宇, 徐卫国. 机器人3D打印建筑的打印路径规划方法探索[J]. 建筑技艺, 2022, 28(7): 79-81.
[23] 李荣帅. 基于DE算法的建筑3D打印完全遍历路径规划研究[J]. 江西科学, 2016, 34(3): 370-373+392.
[Google Scholar] [CrossRef] 
[24] 马宗方, 万伟鹏, 宋琳, 刘超, 刘化威, 武怡文. 采用欧拉回路的混凝土3D打印路径优化算法[J/OL]. 机械科学与技术: 1-7.
2023-04-09.[CrossRef] 
[25] Sakin, M. and Kiroglu, Y.C. (2017) 3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM. Energy Procedia, 134, 702-711.
[Google Scholar] [CrossRef] 
[26] 陈蕾. 突发疫情下BIM+3D打印的装配式建筑技术组合应用的优势[J]. 武汉交通职业学院学报, 2020, 22(1): 81-84.
[27] 赵海平. 融合BIM与3D打印技术的装配式建筑应用[J]. 建筑技术开发, 2022, 49(4): 99-102.
[28] Xu, J., Ding, L. and Love, P.E.D. (2017) Digital Reproduction of Historical Building Ornamental Components: From 3D Scanning to 3D Printing. Automation in Construction, 76, 85-96.
[Google Scholar] [CrossRef] 
[29] 战场黑科技: 美军使用混凝土3D打印技术造营房[EB/OL]. http://military.china.com.cn/2018-09/28/content_64194167.htm?f=pad&a=true, 2018-09-28.
[30] Neil Leach, 朱蔚然. 太空3D打印[J]. 建筑技艺, 2020, 26(8): 27-31.
[31] 何凡, 李丙涛, 付佰勇. 3D 打印技术及其在公路桥梁中的应用探讨[J]. 公路, 2018, 64(2): 105-109．
[32] 段珍华, 刘一村, 肖建庄, 丁陶. 混凝土建筑3D打印技术工程应用分析[J]. 施工技术(中英文), 2021, 50(18): 15-20.

为你推荐