页岩等温脱附体积分离计算方法及意义
Calculation Method and Significance of Desorbed Gas Volume Separation of Shale
DOI: 10.12677/OJNS.2023.113061, PDF,   
作者: 何 毅:四川佳源燃气有限责任公司,四川 成都;吴柏宣:成都理工大学能源学院,四川 成都
关键词: 脱附页岩毛细凝聚多层吸附滞后环Desorption Shale Capillary Condensation Multilayer Desorption Hysteresis Loop
摘要: 等温条件下页岩脱附出的吸附质体积一方面来自多层吸附形成的吸附膜,另一方面来自毛细凝聚所形成的体积。选择适当的孔隙空间模型将两种不同机理形成的脱附体积进行分离计算,能明确在脱附过程中不同机理对脱附体积的影响。同时,在对实际样品进行等温吸附/解吸实验中,通常形成滞后环,而对滞后环形成的解释通常为毛细凝聚作用。应用脱附体积的分离计算方法,可明确毛细凝聚作用与滞后环形成的关系。
Abstract: The adsorbent volume of shale desorption under isothermal conditions is derived from the adsorption film formed by multilayer adsorption on the one hand and the volume formed by capillary condensation on the other hand. An appropriate pore space model is selected to separate and calculate the desorption volume formed by two different mechanisms, which can clarify the influence of different mechanisms on the desorption volume during desorption process. Meanwhile, in isothermal adsorption/desorption experiments on actual samples, hysteresis rings are usually formed, and the explanation of hysteresis rings is usually capillary condensation. The relationship between capillary coagulation and hysteresis ring formation can be determined by the separation calculation method of desorption volume.
文章引用:何毅, 吴柏宣. 页岩等温脱附体积分离计算方法及意义[J]. 自然科学, 2023, 11(3): 513-520. https://doi.org/10.12677/OJNS.2023.113061

参考文献

[1] 近藤精一, 石川达雄, 安部郁夫. 吸附科学[M]. 第二版. 北京: 化学工业出版社, 2005: 32-56.
[2] Neimark, A.V. and Rabinovich, A.B. (1985) Theory of Adsorption and Capillary Condensation in Porous Solids with Cor-puscular Structure—Adsorption of Nitrogen on Mineral Adsorbents. Colloid Journal of the Ussr, 47, 945-950.
[3] 陈永. 多孔材料制备与表征[M]. 第1版. 合肥: 中国科技大学出版社, 2010: 24-77.
[4] Broughton, D.B., Dranoff, J.S., Chi, C.W. and Breck, D.W. (1997) Aadorption—Discussion. Chemical Engineering Progress, 73, 51-53.
[5] 马伟. 固水界面化学与吸附技术[M]. 北京: 冶金工业出版社, 2011: 142-157.
[6] 黄成毅, 张启元, 严继民. 采用水蒸气吸附的孔结构分析方法的研究——吸附层厚及孔径分布的计算[J]. 硅酸盐学报, 1979, 7(4): 333-345.
[7] 严继民, 张启元. 比表面积与孔径分布的测定和计算中一些问题的研究Ⅳ——关于无模型法孔结构分析[J]. 分子科学与化学研究, 1983(2): 75-84.
[8] 黄英, 金彦任, 黄振兴. 活性炭孔径分布测定与计算中的一些问题研究: 对几种孔径分布计算模型的分析比较[J]. 离子交换与吸附, 2012, 28(2): 176-182.
[9] 关岳, 孙钦廉, 邬行彦, 等. 比表面积和孔径分布测定与计算方法的改进[J]. 化学学报, 1990, 48(5): 424-430.
[10] 刘培生. 多孔材料孔径及孔径分布的测定方法[J]. 钛工业进展, 2006, 23(2): 29-34.
[11] 谢晓永, 唐洪明, 王春华, 等. 氮气吸附法和压汞法在测试泥页岩孔径分布中的对比[J]. 天然气工业, 2006, 26(12): 100-102+202-203.
[12] 李国英, 刘乃立, 吴才明. 苯吸附层厚方程及其在孔结构测定中的应用[J]. 催化学报, 1981, 2(4): 268-274.
[13] Perot, A. (1887) ROBERT VON HELMHOLTZ.—Untersuchungen über Dämpfe und Nebel, be-sonders über solche von Lösungen (Recherches sur les vapeurs et la production du brouillard, en particulier dans le cas des dissolutions); Wiedemann’s Annalen, t. XXVII, p. 508, 543; 1886. Journal of Physics: Theories and Ap-plications, 6, 102-106. [Google Scholar] [CrossRef
[14] 张引技, 汤忠, 贺福, 等. 由氮吸附等温线表征中孔型活性炭纤维的孔结构[J]. 离子交换与吸附, 1997, 13(2): 113-119.
[15] 王瑞, 张宁生, 刘晓娟, 等. 页岩气吸附与脱附附机理研究进展[J]. 科学技术与工程, 2013(19): 5561-5567.
[16] 孔德涛, 宁正福, 杨峰, 徐大喜. 页岩气吸附规律研究[J]. 科学技术与工程, 2014, 14(6): 108-111+117.
[17] 杨侃, 陆现彩, 徐金覃, 等. 气体吸附等温线法表征页岩孔隙结构的模型适用性初探[J]. 煤炭学报, 2013, 38(5): 817-821.
[18] 崔峻, 乐英红, 刘毅, 等. MCM-41分子筛和催化剂的特殊吸附等温线[J]. 化学学报, 1997, 55(10): 974-978.
[19] 严继民, 张启元, 高敬琮. 吸附与凝聚: 固体的表面与孔[M]. 第2版. 北京: 科学出版社, 1986: 89-112.
[20] 孙大明, 席光康. 固体的表面与界面[M]. 第2版. 合肥: 安徽教育出版社, 1996: 250-272.