冷再生沥青路面车辙变形与疲劳寿命分析
Rutting Deformation and Fatigue Life Analysis of Cold Recycled Asphalt Pavement
摘要: 基于冷再生沥青路面结构当前研究存在的不足,本文拟开展冷再生沥青路面车辙变形和疲劳寿命研究。本文采用ABAQUS有限元数值仿真建立了三种路面结构模型,获取了沥青面层及其他结构层的材料参数,并基于现场试验数据验证了模型的正确性,确定了沥青路面永久变形等效温度场,以更好地计算冷再生沥青路面车辙变形量。此外,对比分析了乳化沥青和泡沫沥青冷再生路面结构的力学响应和疲劳寿命预估,并基于分析结果给出了相应的工程建议。
Abstract:
Based on the shortcomings of current research on cold recycled asphalt pavement structure, this paper intends to carry out research on rut deformation and fatigue life of cold recycled asphalt pavement. In this paper, three kinds of pavement structure models are established by ABAQUS finite element numerical simulation, and the material parameters of asphalt surface layer and other structural layers are obtained. Based on the field test data, the correctness of the model is verified, and the equivalent temperature field of permanent deformation of asphalt pavement is determined to better calculate the rutting deformation of cold recycled asphalt pavement. In addition, the mechanical response and fatigue life prediction of emulsified asphalt and foamed asphalt cold recycled pavement structure are compared and analyzed, and corresponding engineering suggestions are given based on the analysis results.
参考文献
|
[1]
|
陈改霞, 贾秦龙, 薛邵龙. 乳化沥青厂拌冷再生在高速公路下面层的应用[J]. 安阳工学院学报, 2022, 21(2): 67-72.
|
|
[2]
|
陈谦, 宋亮, 王帅, 等. 泡沫沥青冷再生混合料路用性能综合评价[J]. 重庆交通大学学报(自然科学版), 2021, 40(2): 83-88.
|
|
[3]
|
栾英成, 陈田, 马涛, 等. 基于精细化DEM建模的冷再生混合料断裂性能分析[J]. 中国公路学报, 2021, 34(10): 125-134.
|
|
[4]
|
杜少文. 外加材料对乳化沥青冷再生混合料路用性能的影响[J]. 建筑材料学报, 2013, 16(3): 534-538.
|
|
[5]
|
马川义. 乳化沥青冷再生混合料设计方法优化研究[D]: [硕士学位论文]. 济南: 山东建筑大学, 2014.
|
|
[6]
|
吴聪. 厂拌乳化沥青冷再生在公路建设中的应用研究[D]: [硕士学位论文]. 呼和浩特: 内蒙古农业大学, 2021.
|
|
[7]
|
李昊隆. 乳化沥青冷再生混合料早期强度发展规律研究[D]: [硕士学位论文]. 北京: 北京建筑大学, 2021.
|
|
[8]
|
郑俊秋. 乳化沥青冷再生混合料性能提升研究[D]: [硕士学位论文]. 南京: 东南大学, 2017.
|
|
[9]
|
中国路面工程学术研究综述·2020 [J]. 中国公路学报, 2020, 33(10): 1-66.
|
|
[10]
|
马登成. 沥青路面再生设备研究现状与发展[C]//中国公路学会养护与管理分会, 中交公路规划设计院有限公司, 中交第三公路工程局有限公司. 中国公路学会养护与管理分会第十届学术年会论文集. 2020: 10.
|
|
[11]
|
JTG D50-2017 公路沥青路面设计规范[S]. 北京: 人民交通出版社, 2017.
|