高比能富锂锰基锂金属电池的研究综述
The Study Review of High Specific Capacity Lithium-Rich Manganese-Based Lithium Metal Batteries
DOI: 10.12677/JAPC.2023.124040, PDF,    国家自然科学基金支持
作者: 彭明吉, 杨 浩, 钱 涛, 周 希*：南通大学化学化工学院，江苏 南通
关键词: 富锂锰基正极；锂金属负极；界面问题；Lithium-Rich Manganese-Based Cathode； Lithium Metal Anode； Interface Problems
摘要: 传统商业化的锂金属电池正极材料，如磷酸铁锂，钴酸锂，锰酸锂，高镍三元材料对于目前动力电池提出的更高的能量密度要求已经渐渐不能满足。富锂锰基正极材料因其高的理论比容量(>250 mA·h·g−1)，低廉的价格而受到研究者的广泛关注，被认为是最有前途的下一代高容量电池正极材料之一。但是由于其自身结构的不稳定，面临着倍率性能不好，循环稳定性差，以及在循环过程中严重的电压降等问题。同时，为了获得更高的比容量，富锂锰基锂金属电池的充电截止电压通常需要达到4.8 V，这对现有电解液体系也是一大挑战。另外锂金属电池中严重的界面副反应，不规则的枝晶生长都严重阻碍了富锂锰基锂金属电池的进一步发展。
Abstract: Traditional lithium metal battery cathode materials, such as LiPF6, LiCoO2, LiMn2O4, and high nickel ternary materials, have gradually failed to meet the higher energy density demand by current power batteries. Lithium-rich manganese-based (LRM) cathode materials have received much attention because of the high specific capacity (>250 mA·h·g−1) and low price, and are considered to be one of the most promising materials for next-generation high-energy battery cathodes. However, due to the instable structure, it tends to lead to poor rate performance, poor cycling stability, and severe voltage drop during cycling. Meanwhile, in order to obtain higher capacity, the charge cut-off voltage of LRM lithium metal batteries usually needs to reach 4.8 V, which is also a challenge for the electrolyte. In addition, the severe interfacial side reaction and irregular dendrite growth in LRM lithium metal batteries have seriously hindered the further development of LRM lithium metal batteries.
文章引用：彭明吉, 杨浩, 钱涛, 周希. 高比能富锂锰基锂金属电池的研究综述[J]. 物理化学进展, 2023, 12(4): 425-443. https://doi.org/10.12677/JAPC.2023.124040

参考文献

[1] She, Z.W., Sun, Y., Zhang, Q., et al. (2016) Designing High-Energy Lithium-Sulfur Batteries. Chemical Society Reviews, 45, 5605-5634. [Google Scholar] [CrossRef] 
[2] Turner, J.A. (2004) Sustainable Hydrogen Production. Science, 305, 972-974. [Google Scholar] [CrossRef] [PubMed]
[3] Armand, M. and Tarascon, J.M. (2008) Building Better Batteries. Nature, 451, 652-657. [Google Scholar] [CrossRef] [PubMed]
[4] Dunn, B., Kamath, H. and Tarascon, J.-M. (2011) Electrical Energy Storage for the Grid: A Battery of Choices. Science, 334, 928-935. [Google Scholar] [CrossRef] [PubMed]
[5] Goodenough, J.B. and Kim, Y. (2010) Challenges for Rechargeable Li Batteries. Chemistry of Materials, 22, 587-603. [Google Scholar] [CrossRef] 
[6] Cheng, X.-B., Zhang, R., Zhao, C.-Z., et al. (2016) A Review of Solid Electrolyte Interphases on Lithium Metal Anode. Advanced Science, 3, Article 1500213. [Google Scholar] [CrossRef] [PubMed]
[7] Grande, L., Paillard, E., Hassoun, J., et al. (2015) The Lithium/Air Battery: Still an Emerging System or a Practical Reality? Advanced Materials, 27, 784-800. [Google Scholar] [CrossRef] [PubMed]
[8] Hendrickson, K.E., Ma, L., Cohn, G., et al. (2015) Model Membrane-Free Li-S Batteries for Enhanced Performance and Cycle Life. Advanced Science, 2, Article 1500068. [Google Scholar] [CrossRef] [PubMed]
[9] Tarascon, J.M. and Armand, M. (2001) Issues and Challenges Facing Rechargeable Lithium Batteries. Nature, 414, 359-367. [Google Scholar] [CrossRef] [PubMed]
[10] Evarts, E.C. (2015) Lithium Batteries: To the Limits of Lithium. Nature, 526, S93-S95. [Google Scholar] [CrossRef] 
[11] Choi, J.W. and Aurbach, D. (2016) Promise and Reality of Post-Lithium-Ion Batteries with High Energy Densities. Nature Reviews Materials, 1, Article 16013. [Google Scholar] [CrossRef] 
[12] Xu, W., Wang, J., Ding, F., et al. (2014) Lithium Metal Anodes for Rechargeable Batteries. Energy & Environmental Science, 7, 513-537. [Google Scholar] [CrossRef] 
[13] Lin, D., Liu, Y. and Cui, Y. (2017) Reviving the Lithium Metal Anode for High-Energy Batteries. Nature Nanotechnology, 12, 194-206. [Google Scholar] [CrossRef] [PubMed]
[14] Wu, F., Maier, J. and Yu, Y. (2020) Guidelines and Trends for Next-Generation Rechargeable Lithium and Lithium-Ion Batteries. Chemical Society Reviews, 49, 1569-1614. [Google Scholar] [CrossRef] 
[15] Cao, R., Xu, W., Lv, D., et al. (2015) Anodes for Rechargeable Lithium-Sulfur Batteries. Advanced Energy Materials, 5, Article 1402273. [Google Scholar] [CrossRef] 
[16] Wang, S.-H., Yin, Y.-X., Zuo, T.-T., et al. (2017) Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels. Advanced Materials, 29, Article 1703729. [Google Scholar] [CrossRef] [PubMed]
[17] Garche, J., Dyer, C., Moseley, P. T., et al. (2013) Encyclopedia of Electrochemical Power Sources. Newnes, London.
[18] Liu, B., Zhang, J.-G. and Xu, W. (2018) Advancing Lithium Metal Batteries. Joule, 2, 833-845. [Google Scholar] [CrossRef] 
[19] Bruce, P.G., Freunberger, S.A., Hardwick, L.J., et al. (2012) Li-O2 and Li-S Batteries with High Energy Storage. Nature Materials, 11, 19-29. [Google Scholar] [CrossRef] [PubMed]
[20] Manthiram, A., Fu, Y., Chung, S.-H., et al. (2014) Rechargeable Lithium-Sulfur Batteries. Chemical Reviews, 114, 11751-11787. [Google Scholar] [CrossRef] [PubMed]
[21] Aurbach, D. (2000) Review of Selected Electrode-Solution Interactions Which Determine the Performance of Li and Li ion Batteries. Journal of Power Sources, 89, 206-218. [Google Scholar] [CrossRef] 
[22] Liu, S., Ji, X., Yue, J., et al. (2020) High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries. Journal of the American Chemical Society, 142, 2438-2447. [Google Scholar] [CrossRef] [PubMed]
[23] Xiao, J., Li, Q., Bi, Y., et al. (2020) Understanding and Applying Coulombic Efficiency in Lithium Metal Batteries. Nature Energy, 5, 561-568. [Google Scholar] [CrossRef] 
[24] Lin, D., Liu, Y., Pei, A., et al. (2017) Nanoscale Perspective: Materials Designs and Understandings in Lithium Metal Anodes. Nano Research, 10, 4003-4026. [Google Scholar] [CrossRef] 
[25] Yang, C., Fu, K., Zhang, Y., et al. (2017) Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid. Advanced Materials, 29, Article 1701169. [Google Scholar] [CrossRef] [PubMed]
[26] Wang, Q., Liu, B., Shen, Y., et al. (2021) Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries. Advanced Science, 8, e2101111. [Google Scholar] [CrossRef] [PubMed]
[27] Wang, J., Ge, B., Li, H., et al. (2021) Challenges and Progresses of Lithium-Metal Batteries. Chemical Engineering Journal, 420, Article 129739. [Google Scholar] [CrossRef] 
[28] Zou, P.C., Wang, Y., Chiang, S.W., Wang, X.Y., et al. (2018) Directing Lateral Growth of Lithium Dendrites in Micro-Compartmented Anode Arrays for Safe Lithium Metal Batteries. Nature Communications, 9, Article No. 464. [Google Scholar] [CrossRef] [PubMed]
[29] Yan, K., Lu, Z., Lee, H.-W., et al. (2016) Selective Deposition and Stable Encapsulation of Lithium through Heterogeneous Seeded Growth. Nature Energy, 1, Article No. 16010. [Google Scholar] [CrossRef] 
[30] Yin, Y.-X., Xin, S., Guo, Y.-G., et al. (2013) Lithium-Sulfur Batteries: Electrochemistry, Materials, and Prospects. Angewandte Chemie International Edition, 52, 13186-13200. [Google Scholar] [CrossRef] [PubMed]
[31] Zhu, Y., He, X. and Mo, Y. (2015) Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations. ACS Applied Materials & Interfaces, 7, 23685-23693. [Google Scholar] [CrossRef] [PubMed]
[32] Tasaki, K., Kanda, K., Kobayashi, T., et al. (2006) Theoretical Studies on the Reductive Decompositions of Solvents and Additives for Lithium-Ion Batteries near Lithium Anodes. Journal of the Electrochemical Society, 153, A2192. [Google Scholar] [CrossRef] 
[33] Leung, K., Qi, Y., Zavadil, K.R., et al. (2011) Using Atomic Layer Deposition to Hinder Solvent Decomposition in Lithium Ion Batteries: First-Principles Modeling and Experimental Studies. Journal of the American Chemical Society, 133, 14741-14754. [Google Scholar] [CrossRef] [PubMed]
[34] Yu, J., Balbuena, P.B., Budzien, J., et al. (2011) Hybrid DFT Functional-Based Static and Molecular Dynamics Studies of Excess Electron in Liquid Ethylene Carbonate. Journal of the Electrochemical Society, 158, A400. [Google Scholar] [CrossRef] 
[35] Zhu, Y., He, X. and Mo, Y. (2016) First Principles Study on Electrochemical and Chemical Stability of Solid Electrolyte-Electrode Interfaces in All-Solid-State Li-Ion Batteries. Journal of Materials Chemistry A, 4, 3253-3266. [Google Scholar] [CrossRef] 
[36] Richards, W.D., Miara, L.J., Wang, Y., et al. (2016) Interface Stability in Solid-State Batteries. Chemistry of Materials, 28, 266-273. [Google Scholar] [CrossRef] 
[37] Aurbach, D., Weissman, I., Zaban, A., et al. (1994) Correlation between Surface Chemistry, Morphology, Cycling Efficiency and Interfacial Properties of Li Electrodes In Solutions Containing Different Li Salts. Electrochimica Acta, 39, 51-71. [Google Scholar] [CrossRef] 
[38] Nanjundiah, C., Goldman, J.L., Dominey, L.A., et al. (1988) Electrochemical Stability of LiMF6 (M = P, As, Sb) in Tetrahydrofuran and Sulfolane. Journal of the Electrochemical Society, 135, 2914. [Google Scholar] [CrossRef] 
[39] Aurbach, D., Ein-Eli, Y., Markovsky, B., et al. (1995) The Study of Electrolyte Solutions Based on Ethylene and Diethyl Carbonates for Rechargeable Li Batteries: II. Graphite Electrodes. Journal of the Electrochemical Society, 142, 2882. [Google Scholar] [CrossRef] 
[40] Xu, K. (2004) Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries. Chemical Reviews, 104, 4303-4418. [Google Scholar] [CrossRef] [PubMed]
[41] Eshetu, G.G., Judez, X., Li, C., et al. (2017) Lithium Azide as an Electrolyte Additive for All-Solid-State Lithium-Sulfur Batteries. Angewandte Chemie International Edition, 56, 15368-15372. [Google Scholar] [CrossRef] [PubMed]
[42] Aurbach, D., Pollak, E., Elazari, R., et al. (2009) On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li-Sulfur Batteries. Journal of the Electrochemical Society, 156, A694. [Google Scholar] [CrossRef] 
[43] Keller, M., Varzi, A. and Passerini, S. (2018) Hybrid Electrolytes for Lithium Metal Batteries. Journal of Power Sources, 392, 206-225. [Google Scholar] [CrossRef] 
[44] Choi, S.H., Lee, S.J., Yoo, D.-J., et al. (2019) Marginal Magnesium Doping for High-Performance Lithium Metal Batteries. Advanced Energy Materials, 9, Article 1902278. [Google Scholar] [CrossRef] 
[45] Chazalviel, J.N. (1990) Electrochemical Aspects of the Generation of Ramified Metallic Electrodeposits. Physical Review A, 42, 7355-7367. [Google Scholar] [CrossRef] 
[46] Liu, S., Deng, L., Guo, W., et al. (2019) Bulk Nanostructured Materials Design for Fracture-Resistant Lithium Metal Anodes. Advanced Materials, 31, Article 1807585. [Google Scholar] [CrossRef] [PubMed]
[47] Ye, H., Zheng, Z.-J., Yao, H.-R., et al. (2019) Guiding Uniform Li Plating/Stripping through Lithium-Aluminum Alloying Medium for Long-Life Li Metal Batteries. Angewandte Chemie International Edition, 58, 1094-1099. [Google Scholar] [CrossRef] [PubMed]
[48] Chen, H., Pei, A., Lin, D., et al. (2019) Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode. Advanced Energy Materials, 9, Article 1900858. [Google Scholar] [CrossRef] 
[49] Sun, S., Myung, S., Kim, G., et al. (2020) Facile ex Situ Formation of a LiF-Polymer Composite Layer as an Artificial SEI Layer on Li Metal by Simple Roll-Press Processing for Carbonate Electrolyte-Based Li Metal Batteries. Journal of Materials Chemistry A, 8, 17229-17237. [Google Scholar] [CrossRef] 
[50] Yang, Y., Xiong, J., Lai, S., et al. (2019) Vinyl Ethylene Carbonate as an Effective SEI-Forming Additive in Carbonate-Based Electrolyte for Lithium-Metal Anodes. ACS Applied Materials & Interfaces, 11, 6118-6125. [Google Scholar] [CrossRef] [PubMed]
[51] Howlett, P.C., Macfarlane, D.R. and Hollenkamp, A.F. (2003) A Sealed Optical Cell for the Study of Lithium- Electrode|electrolyte Interfaces. Journal of Power Sources, 114, 277-284. [Google Scholar] [CrossRef] 
[52] Aryanfar, A., Brooks, D.J., Colussi, A.J., et al. (2014) Quantifying the Dependence of Dead Lithium Losses on the Cycling Period in Lithium Metal Batteries. PCCP, 16, 24965-24970. [Google Scholar] [CrossRef] 
[53] Hong, S.-T., Kim, J.-S., Lim, S.-J., et al. (2004) Surface Characterization of Emulsified Lithium Powder Electrode. Electrochimica Acta, 50, 535-539. [Google Scholar] [CrossRef] 
[54] Gireaud, L., Grugeon, S., Laruelle, S., et al. (2006) Lithium Metal Stripping/Plating Mechanisms Studies: A Metallurgical Approach. Electrochemistry Communications, 8, 1639-1649. [Google Scholar] [CrossRef] 
[55] Liang, X., Pang, Q., Kochetkov, I.R., et al. (2017) A Facile Surface Chemistry Route to a Stabilized Lithium Metal Anode. Nature Energy, 2, Article No. 17119. [Google Scholar] [CrossRef] 
[56] Dollé, M., Sannier, L., Beaudoin, B., et al. (2002) Live Scanning Electron Microscope Observations of Dendritic Growth in Lithium/Polymer Cells. Electrochemical and Solid-State Letters, 5, A286. [Google Scholar] [CrossRef] 
[57] Park, H.E., Hong, C.H. and Yoon, W.Y. (2008) The Effect of Internal Resistance on Dendritic Growth on Lithium Metal Electrodes in the Lithium Secondary Batteries. Journal of Power Sources, 178, 765-768. [Google Scholar] [CrossRef] 
[58] Lee, H., Chen, S., Ren, X., et al. (2018) Electrode Edge Effects and the Failure Mechanism of Lithium-Metal Batteries. ChemSusChem, 11, 3821-3828. [Google Scholar] [CrossRef] [PubMed]
[59] Louli, A.J., Eldesoky, A., Weber, R., et al. (2020) Diagnosing and Correcting Anode-Free Cell Failure via Electrolyte and Morphological Analysis. Nature Energy, 5, 693-702. [Google Scholar] [CrossRef] 
[60] Wang, A., Tang, S., Kong, D., et al. (2018) Bending-Tolerant Anodes for Lithium-Metal Batteries. Advanced Materials, 30, Article 1703891. [Google Scholar] [CrossRef] [PubMed]
[61] Pu, J., Li, J., Zhang, K., et al. (2019) Conductivity and Lithiophilicity Gradients Guide Lithium Deposition to Mitigate Short Circuits. Nature Communications, 10, Article No. 1896. [Google Scholar] [CrossRef] [PubMed]
[62] Fan, L., Zhuang, H.L., Zhang, W., et al. (2018) Stable Lithium Electrodeposition at Ultra-High Current Densities Enabled by 3D PMF/Li Composite Anode. Advanced Energy Materials, 8, Article 1703360. [Google Scholar] [CrossRef] 
[63] Li, Q., Tan, S., Li, L., et al. (2017) Understanding the Molecular Mechanism of Pulse Current Charging for Stable Lithium-Metal Batteries. Science Advances, 3, e1701246. [Google Scholar] [CrossRef] [PubMed]
[64] Zhang, Z., Wang, Z.L. and Lu, X. (2019) Suppressing Lithium Dendrite Growth via Sinusoidal Ripple Current Produced by Triboelectric Nanogenerators. Advanced Energy Materials, 9, Article 1900487. [Google Scholar] [CrossRef] 
[65] Liu, Y., Liu, Q., Xin, L., et al. (2017) Making Li-Metal Electrodes Rechargeable by Controlling the Dendrite Growth Direction. Nature Energy, 2, Article No. 17083. [Google Scholar] [CrossRef] 
[66] Peled, E. (1979) The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase Model. Journal of the Electrochemical Society, 126, 2047. [Google Scholar] [CrossRef] 
[67] Liu, J., Bao, Z., Cui, Y., et al. (2019) Pathways for Practical High-Energy Long-Cycling Lithium Metal Batteries. Nature Energy, 4, 180-186. [Google Scholar] [CrossRef] 
[68] Zhang, W., Wu, Q., Huang, J., et al. (2020) Colossal Granular Lithium Deposits Enabled by the Grain-Coarsening Effect for High-Efficiency Lithium Metal Full Batteries. Advanced Materials, 32, Article 2001740. [Google Scholar] [CrossRef] [PubMed]
[69] Verma, P., Maire, P. and Novák, P. (2010) A Review of the Features and Analyses of the Solid Electrolyte Interphase in Li-Ion Batteries. Electrochimica Acta, 55, 6332-6341. [Google Scholar] [CrossRef] 
[70] Umeda, G.A., Menke, E., Richard, M., et al. (2011) Protection of Lithium Metal Surfaces Using Tetraethoxysilane. Journal of Materials Chemistry, 21, 1593-1599. [Google Scholar] [CrossRef] 
[71] Shim, J., Lee, J.W., Bae, K.Y., et al. (2017) Dendrite Suppression by Synergistic Combination of Solid Polymer Electrolyte Crosslinked with Natural Terpenes and Lithium-Powder Anode for Lithium-Metal Batteries. ChemSusChem, 10, 2274-2283. [Google Scholar] [CrossRef] [PubMed]
[72] Rossouw, M.H. and Thackeray, M.M. (1991) Lithium Manganese Oxides from Li2MnO3 for Rechargeable Lithium Battery Applications. Materials Research Bulletin, 26, 463-473. [Google Scholar] [CrossRef] 
[73] Peng, Z., Cao, X., Gao, P., et al. (2020) High-Power Lithium Metal Batteries Enabled by High-Concentration Acetonitrile-Based Electrolytes with Vinylene Carbonate Additive. Advanced Functional Materials, 30, Article 2001285. [Google Scholar] [CrossRef] 
[74] Pathak, R., Chen, K., Gurung, A., et al. (2020) Fluorinated Hybrid Solid-Electrolyte-Interphase for Dendrite-Free Lithium Deposition. Nature Communications, 11, Article No. 93. [Google Scholar] [CrossRef] [PubMed]
[75] Aurbach, D., Daroux, M.L., Faguy, P.W., et al. (1987) Identification of Surface Films Formed on Lithium in Propylene Carbonate Solutions. Journal of the Electrochemical Society, 134, 1611. [Google Scholar] [CrossRef] 
[76] Lu, Z., Chen, Z. and Dahn, J.R. (2003) Lack of Cation Clustering in Li[NixLi1/3−2x/3Mn2/3−x/3]O2 (0 < x ≤ 1/2) and Li[CrxLi(1−x)/3Mn(2−2x)/3]O2 (0 < x < 1). Chemistry of Materials, 15, 3214-3220. [Google Scholar] [CrossRef] 
[77] Thackeray, M.M., Johnson, C.S., Vaughey, J.T., et al. (2005) Advances in Manganese-Oxide ‘Composite’ Electrodes for Lithium-Ion Batteries. Journal of Materials Chemistry, 15, 2257-2267. [Google Scholar] [CrossRef] 
[78] Xu, K. (2014) Electrolytes and Interphases in Li-Ion Batteries and Beyond. Chemical Reviews, 114, 11503-11618. [Google Scholar] [CrossRef] [PubMed]
[79] Lu, Z., Beaulieu, L.Y., Donaberger, R.A., Thomas, C.L., et al. (2002) Synthesis, Structure, and Electrochemical Behavior of Li[NixLi1/3−2x/3Mn2/3−x/3]O2. Journal of the Electrochemical Society, 149, A778. [Google Scholar] [CrossRef] 
[80] Armstrong, A.R., Holzapfel, M., Novák, P., et al. (2006) Demonstrating Oxygen Loss and Associated Structural Reorganization in the Lithium Battery Cathode Li[Ni0.2Li0.2Mn0.6]O2. Journal of the American Chemical Society, 128, 8694-8698. [Google Scholar] [CrossRef] [PubMed]
[81] Qian, J., Henderson, W.A., Xu, W., et al. (2015) High Rate and Stable Cycling of Lithium Metal Anode. Nature Communications, 6, Article No. 6362. [Google Scholar] [CrossRef] [PubMed]
[82] Assat, G. and Tarascon, J.-M. (2018) Fundamental Understanding and Practical Challenges of Anionic Redox Activity in Li-Ion Batteries. Nature Energy, 3, 373-386. [Google Scholar] [CrossRef] 
[83] Wang, J., He, X., Paillard, E., et al. (2016) Lithium- and Manganese-Rich Oxide Cathode Materials for High-Energy Lithium Ion Batteries. Advanced Energy Materials, 6, Article 1600906. [Google Scholar] [CrossRef] 
[84] Lee, W., Muhammad, S., Sergey, C., et al. (2020) Advances in the Cathode Materials for Lithium Rechargeable Batteries. Angewandte Chemie International Edition, 59, 2578-2605. [Google Scholar] [CrossRef] [PubMed]
[85] Nie, L., Chen, S. and Liu, W. (2023) Challenges and Strategies of Lithium-Rich Layered Oxides for Li-Ion Batteries. Nano Research, 16, 391-402. [Google Scholar] [CrossRef] 
[86] Yu, H., Ishikawa, R., So, Y.-G., Shibata, N., et al. (2013) Direct Atomic-Resolution Observation of Two Phases in the Li1.2Mn0.567Ni0.166Co0.067O2 Cathode Material for Lithium-Ion Batteries. Angewandte Chemie International Edition, 52, 5969-5973. [Google Scholar] [CrossRef] [PubMed]
[87] Louli, A.J., Genovese, M., Weber, R., et al. (2019) Exploring the Impact of Mechanical Pressure on the Performance of Anode-Free Lithium Metal Cells. Journal of the Electrochemical Society, 166, A1291. [Google Scholar] [CrossRef] 
[88] Zhu, G.-L., Zhao, C.-Z., Huang, J.-Q., et al. (2019) Fast Charging Lithium Batteries: Recent Progress and Future Prospects. Small, 15, Article 1805389. [Google Scholar] [CrossRef] [PubMed]
[89] Gao, Y., Wang, X., Ma, J., et al. (2015) Selecting Substituent Elements for Li-Rich Mn-Based Cathode Materials by Density Functional Theory (DFT) Calculations. Chemistry of Materials, 27, 3456-3461. [Google Scholar] [CrossRef] 
[90] Neudecker, B.J., Dudney, N.J. and Bates, J.B. (2000) “Lithium-Free” Thin-Film Battery with in Situ Plated Li Anode. Journal of the Electrochemical Society, 147, 517. [Google Scholar] [CrossRef] 
[91] Zhuo, Z., Dai, K., Qiao, R., et al. (2021) Cycling Mechanism of Li2MnO3: Li-CO2 Batteries and Commonality on Oxygen Redox in Cathode Materials. Joule, 5, 975-997. [Google Scholar] [CrossRef] 
[92] He, W., Guo, W., Wu, H., et al. (2021) Challenges and Recent Advances in High Capacity Li-Rich Cathode Materials for High Energy Density Lithium-Ion Batteries. Advanced Materials, 33, e2005937. [Google Scholar] [CrossRef] [PubMed]
[93] Zou, L., He, Y., Liu, Z., et al. (2020) Unlocking the Passivation Nature of the Cathode-Air Interfacial Reactions in Lithium ion Batteries. Nature Communications, 11, Article No. 3204. [Google Scholar] [CrossRef] [PubMed]
[94] Asl, H.Y. and Manthiram, A. (2020) Reining in Dissolved Transition-Metal Ions. Science, 369, 140-141. [Google Scholar] [CrossRef] [PubMed]
[95] Xu, B., Fell, C.R., Chi, M., et al. (2011) Identifying Surface Structural Changes in Layered Li-Excess Nickel Manganese Oxides in High Voltage Lithium Ion Batteries: A Joint Experimental and Theoretical Study. Energy & Environmental Science, 4, 2223-2233. [Google Scholar] [CrossRef] 
[96] Yu, L., Chen, S., Lee, H., et al. (2018) A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries. ACS Energy Letters, 3, 2059-2067. [Google Scholar] [CrossRef] 
[97] Hu, E., Yu, X., Lin, R., et al. (2018) Evolution of Redox Couples in Li- and Mn-Rich Cathode Materials and Mitigation of Voltage Fade by Reducing Oxygen Release. Nature Energy, 3, 690-698. [Google Scholar] [CrossRef] 
[98] Liu, D., Fan, X., Li, Z., et al. (2019) A Cation/Anion Co-Doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 Cathode for Lithium Ion Batteries. Nano Energy, 58, 786-796. [Google Scholar] [CrossRef] 
[99] He, W., Liu, P., Zhou, Y., et al. (2020) A Novel Morphology-Controlled Synthesis of Na+-Doped Li- and Mn-Rich Cathodes by the Self-Assembly of Amphiphilic Spherical Micelles. Sustainable Materials and Technologies, 25, e00171. [Google Scholar] [CrossRef] 
[100] Sun, Z., Xu, L., Dong, C., et al. (2019) A Facile Gaseous Sulfur Treatment Strategy for Li-Rich and Ni-Rich Cathode Materials with High Cycling and Rate Performance. Nano Energy, 63, Article 103887. [Google Scholar] [CrossRef] 
[101] Zhao, Y., Liu, J., Wang, S., et al. (2016) Surface Structural Transition Induced by Gradient Polyanion-Doping in Li-Rich Layered Oxides: Implications for Enhanced Electrochemical Performance. Advanced Functional Materials, 26, 4760-4767. [Google Scholar] [CrossRef] 
[102] Oh, P., Oh, S.-M., Li, W., et al. (2016) High-Performance Heterostructured Cathodes for Lithium-Ion Batteries with a Ni-Rich Layered Oxide Core and a Li-Rich Layered Oxide Shell. Advanced Science, 3, Article ID: 1600184. [Google Scholar] [CrossRef] [PubMed]
[103] Deng, Z.Q. and Manthiram, A. (2011) Influence of Cationic Substitutions on the Oxygen Loss and Reversible Capacity of Lithium-Rich Layered Oxide Cathodes. The Journal of Physical Chemistry C, 115, 7097-7103. [Google Scholar] [CrossRef] 
[104] Gent, W.E., Lim, K., Liang, Y., et al. (2017) Coupling between Oxygen Redox and Cation Migration Explains Unusual Electrochemistry in Lithium-Rich Layered Oxides. Nature Communications, 8, Article No. 2091. [Google Scholar] [CrossRef] [PubMed]
[105] Dai, K., Mao, J., Zhuo, Z., et al. (2020) Negligible Voltage Hysteresis with Strong Anionic Redox in Conventional Battery Electrode. Nano Energy, 74, Article 104831. [Google Scholar] [CrossRef] 
[106] Zhang, Y., Tao, L., Xie, C., et al. (2020) Defect Engineering on Electrode Materials for Rechargeable Batteries. Advanced Materials, 32, Article ID: 1905923. [Google Scholar] [CrossRef] [PubMed]
[107] Guo, H., Wei, Z., Jia, K., et al. (2019) Abundant Nanoscale Defects to Eliminate Voltage Decay in Li-Rich Cathode Materials. Energy Storage Materials, 16, 220-227. [Google Scholar] [CrossRef] 
[108] Lee, E., Koritala, R., Miller, D.J. and Johnson, C.S. (2015) Aluminum and Gallium Substitution into 0.5Li2MnO3∙0.5Li (Ni0.375Mn0.375Co0.25)O2 Layered Composite and the Voltage Fade Effect. Journal of the Electrochemical Society, 162, A322. [Google Scholar] [CrossRef] 
[109] Liu, P., Zhang, H., He, W., Xiong, T., et al. (2019) Lithium Deficiencies Engineering in Li-Rich Layered Oxide Li1.098Mn0.533Ni0.113Co0.138O2 for High-Stability Cathode. Journal of the American Chemical Society, 141, 10876-10882. [Google Scholar] [CrossRef] [PubMed]
[110] Lu, Y., Rong, X., Hu, Y.-S., et al. (2019) Research and Development of Advanced Battery Materials in China. Energy Storage Materials, 23, 144-153. [Google Scholar] [CrossRef] 
[111] Si, M., Wang, D., Zhao, R., et al. (2020) Local Electric-Field-Driven Fast Li Diffusion Kinetics at the Piezoelectric LiTaO3 Modified Li-Rich Cathode-Electrolyte Interphase. Advanced Science, 7, Article ID: 1902538. [Google Scholar] [CrossRef] [PubMed]
[112] Li, Q., Zhou, D., Zhang, L., et al. (2019) Tuning Anionic Redox Activity and Reversibility for a High-Capacity Li-Rich Mn-Based Oxide Cathode via an Integrated Strategy. Advanced Functional Materials, 29, Article ID: 1806706. [Google Scholar] [CrossRef] 
[113] Liu, Y., Yang, Z., Zhong, J., et al. (2019) Surface-Functionalized Coating for Lithium-Rich Cathode Material to Achieve Ultra-High Rate and Excellent Cycle Performance. ACS Nano, 13, 11891-11900.
https://Doi.Org/10.1021/Acsnano.9b05960
[114] Fu, F., Yao, Y., Wang, H., et al. (2017) Structure Dependent Electrochemical Performance of Li-Rich layered Oxides in Lithium-Ion Batteries. Nano Energy, 35, 370-378. [Google Scholar] [CrossRef] 
[115] Yu, F.-D., Que. L.-F., Wang. Z.-B., et al. (2017) Controllable Synthesis of Hierarchical Ball-in-Ball Hollow Micro-Spheres for a High Performance Layered Li-Rich Oxide Cathode Material. Journal of Materials Chemistry A, 5, 9365-9376. [Google Scholar] [CrossRef] 
[116] Kobayashi, G., Irii, Y., Matsumoto, F., et al. (2016) Improving Cycling Performance of Li-Rich Layered Cathode Materials through Combination of Al2O3-Based Surface Modification and Stepwise Precycling. Journal of Power Sources, 303, 250-256. [Google Scholar] [CrossRef] 
[117] Dai, S., Yan, G., Wang, L., et al. (2019) Enhanced Electrochemical Performance and Thermal Properties of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode material via CaF2 Coating. Journal of Electroanalytical Chemistry, 847, Article 113197. [Google Scholar] [CrossRef] 
[118] Pang, S., Wang, Y., Chen, T., et al. (2016) The Effect of AlF3 Modification on the Physicochemical and Electrochemical Properties of Li-Rich Layered Oxide. Ceramics International, 42, 5397-5402. [Google Scholar] [CrossRef] 
[119] Wang, F., Xiao, S., Li, M., et al. (2015) A Nanocomposite of Li2MnO3 Coated by FePO4 as Cathode Material for Lithium Ion Batteries. Journal of Power Sources, 287, 416-421. [Google Scholar] [CrossRef] 
[120] Nie, L., Li, Y., Chen, S., et al. (2019) Biofilm Nanofiber-Coated Separators for Dendrite-Free Lithium Metal Anode and Ultrahigh-Rate Lithium Batteries. ACS Applied Materials & Interfaces, 11, 32373-32380. [Google Scholar] [CrossRef] [PubMed]
[121] Qiu, B., Yin, C., Xia, Y., et al. (2017) Synthesis of Three-Dimensional Nanoporous Li-Rich Layered Cathode Oxides for High Volumetric and Power Energy Density Lithium-Ion Batteries. ACS Applied Materials & Interfaces, 9, 3661-3666. [Google Scholar] [CrossRef] [PubMed]